• 한국산림과학회지
• /
• 제99권3호
• /
• pp.259-266
• /
• 2010

우리나라에서 산불 발생 공간분포는 인간 활동과 큰 관련성이 있기 때문에, 지역별 군집형태의 강한 공간의존성을 갖는다. 본 연구에서는 공간의존성의 개념에 입각하여 점자료 분석법을 통한 산불발생의 공간분포패턴을 분석하였다. Ripley의 K 함수를 이용하여 산불 발생 원인별 공간분포 형태를 파악하였으며, Kernel 함수를 통해 산불발생의 공간적 집중도를 분석하였다. 그 결과 정도는 상이하지만 모든 원인의 산불이 임의(random) 분포가 아닌 군집화(clustered)되어 발생하는 특징이 있는 것으로 나타났다. 또한, 산불 발생의 군집성을 원인별로 크게 두 집단으로 나눌 수 있었다. 첫째는 전국적 발생 패턴을 가지는 원인으로 입산자 실화, 논밭두렁 소각과 같은 활동과 관련된 것이고 또 다른 하나는 국지적 군집성을 가지는 원인으로 담뱃불이나 어린이 불장난, 방화이다. 그 군집성의 범위는 30 km내외로 나타났으며, 그 범위 밖에서는 임의 분포하고 있었다. Kernel 함수에 의한 원인별 집중도 분석에서는 강한 군집도를 나타냈던 3가지 원인(담뱃불, 어린이 불장난, 방화)의 경우 대부분 인구밀도가 높은 수도권을 중심으로 발생하는 것을 확인할 수 있었다.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.69-74
• /
• 2008

Aircraft fires due to accident at an airport may be under a special situation. An outstanding characteristic of aircraft fires is their tendency to reach lethal intensity within a very short time. In domestic aviation act, there are regulations related to services coping with the aircraft accidents within an airport. To cope aircraft fires, it is necessary to define clearly the regulations and standards about the services and related activities of rescue and fire fighting, and to keep the regulations and standards. The study has been performed on the basis of International Civil Aviation Organization (ICAO) Airport Services Manual of rescue and fire fighting. The objective of study is to suggest improvement methods for standards applicable to actual service practices of rescue and fire fighting by analyzing through the comparison of domestic and international regulations and standards.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.506-508
• /
• 2003

In the case of a fire in the mountains, steel wires coated with zinc and aluminum wires of those power cables exposed to the fire or near around will be deteriorated by the blaze and the high temperature. This paper shows the experimental results that apply to a new wire by an artificial flame-maker and results including the intensity of extension and wrench for a conductor. In addition, there's been an experiment and analysis about the mechanical characteristics of the wire of ACSR $480mm^2$ which was removed from A T/L by a forest fire. Then, the database will be made to predict the state of deteriorated wires by a forest fire using those two data, and data necessary to diagnose the life state of an ACSR wire affected by a forest fire will be given.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.61-66
• /
• 2011

Fire disasters have frequently happened in concrete structures, which resulted in severe structural damages and unsafety. In this case, the method which had evaluated the safety of damaged structures was often unaccepted from most of stakeholders and engineers. The objective of this study is to develope the procedure and method to be able to determine the safety. Numerical simulation was applied to produce the maximum temperature and temperature distribution. Nextly, temperature propagation analysis was performed to plot temperature gradients at each depth and location. The material strength curve versus temperature was applied to determine the safety of concrete structures damaged by fire. The maximum temperature should be calibrated considering real fire records ; magnitude, intensity, situation etc. The results shows that the selected procedure and method was applicable and practical.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.88-93
• /
• 2004

This experimental study was carried out to evaluate effect of the radiation heat flux for the pool and spill fire in petroleum storage tanks, which were made form steel. Each of them had the capacity of 250, 2500 and 25000 liter, respectively. The effects of the radiation heat flux are as follows; 1) The intensity of radiation heat flux from a flame decreased exponentially with increasing distance from outside wall of tanks, and increased significantly with surface area of tank and dyke. 2) In the case of 25000L tank, the radiation heat flux was about max. 98.9kW/$m^2$ in 1m from wall of tank. 3) The distance, that was able to ignite wood or plastics by radiation heat flux of approximately 12.5kW/$m^2$, was about 3.14m from wall of 25000L tank.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.107-119
• /
• 2003

2002년 8월 태풍 루사로 인하여 강원도 영동지역에서는 많은 피해가 발생하였다. 이에 따라 본 논문에서는 그 중 강릉지역에서 발생된 산사태 현장을 조사하여 그 특징을 분석하고자 하였다. 조사현장들은 이 지역의 산사태 특징을 대표할 수 있는 11개 현장을 선정하였으며 사면의 규모, 토질, 식생상태 등을 현장을 답사하여 조사하여 산사태 발생원인을 분석하였다. 그 결과, 이 지역에서는 강우량, 풍속, 지형, 식생상태 그리고 산불발생 등이 많은 산사태를 발생시킨 주요 요인으로 판단되었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.282-288
• /
• 1997

The purpose of this paper is to predict the situation of leak in closed space using an Artificial Neural Network (ANN). The existing system can't monitor the whole He situations with on/off signals. Especially the first stage of data determines the leak spot and intensity is disregarded in gas accidents. To complement these faults, a new prototype of monitoring system is proposed. Ihe system is composed of'sensing systenL data acquisition system computer, and ANN implemented in software and is capable of identifying the leak spot and intensity in closed space. The concentration of gas is measured at the 4 different places. The network has 3 layers that are composed of 4 input Processing Element (PE),24 hidden PEs, md 4 output PEs. The ANN has optimum condition through several experiments and as a consequence the recognition rate of93.75% is achieved finally

• 컴퓨터교육학회논문지
• /
• 제13권6호
• /
• pp.99-104
• /
• 2010

USN 화재방재 시스템은 온도, 습도, 조도, 가속도, CO2 등의 다양한 센서로부터 얻는 데이터를 이용해 관리자에게 전달하고, 화재를 판별하는 화재 판별 알고리즘을 이용하여 소화설비를 동작시키는 지능적인 시스템이다. USN 화재방재 시스템은 센서의 데이터에 전적으로 의지하여 동작함으로 본 논문에서는 분산된 각각의 센서 데이터들을 임베디드 시스템 환경에서 효율적이고 안전하게 수집, 전달하기 위한 모델을 제안한다. 패킷의 구성과 패키징은 저 전력 소모를 위해 최대한 가볍고 빠른 처리 과정을 거치게 설계하였으며, 현재 나와 있는 암호화 알고리즘 중 DES, 3DES, AES, HIGHT를 각각 적용, 빠른 암복호화에 목표를 두어 최종적으로 국내에서 제안한 표준 암호화 알고리즘인 HIGHT가 잦은 센싱 시간을 요구하는 화재방재 시스템에 적합함을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.124-132
• /
• 2010

To predict and analyze the rolling stock's fire growth is considered not only important factor in estimating hazard analysis of rolling stock, but also a primary factor in aspect of a rail load facility. Because it's could be regarded as a ignition source in risk assesment for the facility i.e. tunnel and station. However, currently, standardized method to predict and analyze the fire growth has not been completed yet. it is due to the fact that fire growth is not only depended on thermal property of interior materials, but also is affected dominantly by various factors such as ignition source (characterized by location, duration, and intensity), train running condition and in/exterior ventilation condition. Especially, ventilation condition is one of the most effective factor to affect fire growth in compartment space as noticed by under-ventilation fire condition. In this study, the effect of each ventilation condition on fire growth and load were examined through the numerical method through FDS (Fire Dynamics Simulator).

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.