• 제목/요약/키워드: Fire extinguishing performance

검색결과 131건 처리시간 0.022초

건축물 창호 프레임의 연소특성에 따른 방화성능 검증에 관한 실험적 연구 (An Experimental Study on the Verification of Fire Extinguishing Performance According to the Combustion Characteristics of Building Window Frame)

  • 이병흔;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.54-55
    • /
    • 2021
  • This study compared the fire safety standards for windows of Korea, the U.S. and Japan to prevent fire expansion through exterior wall openings, and conducted experiments using PVC and aluminum window frames, which are widely used in Korea.The experiment is KS F 2845 which combines frames of the same thickness and area with single-window form and 1 hour fire resistance glass with 8T thickness. Experiments showed that the PVC window was about 9 minutes and the aluminum window was about 26 minutes. However, in Korea, there are no test standards for windows installed at the opening of the exterior wall. In addition, fire safety standards for windows shall be established along with the designation of fire prevention zones.

  • PDF

소형항공기의 화재방지 요건 및 시험에 관한 연구 (A Study on Fire Prevention Requirements and Tests for Small Aircraft)

  • 유승우;진영권
    • 항공우주시스템공학회지
    • /
    • 제5권1호
    • /
    • pp.7-12
    • /
    • 2011
  • The goal of fire prevention research is to eliminate fires as a cause of fatal accidents and there are two main areas of research. One is to prevent flame propagation during in-flight and it addresses fire hazards. The other is to minimize the possibility of flame penetration or fuselage burn-through and it aims toward post-crash survival include crash protection, emergency evacuation and post-evacuation survival. Civil aviation authorities world-wide are trying to identify threats and measure performance for fire prevention. The results of research are standardized and given as general directions of test methods. This paper has prepared to study and present the means of compliance to the fire prevention requirements and applicable test methods.

고체에어로졸 소화장치의 B, C급 소공간 화재 소화성능 연구 (Fire Extinguishing Performance of Condensed Aerosol Extinguisher on the B,C Class Fire in a Small Cabinet)

  • 박용환;김범규;이성미
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
    • /
    • pp.139-146
    • /
    • 2009
  • 현재 배전반, 소규모 유류저장고 등은 법적 의무 대상 공간이 아니어서 화재시 초기소화 실패로 인해 큰 재산상의 피해를 겪고 있으며, 이러한 소공간 화재에 대응할 수 있는 적합한 소화장치의 제도적 뒷받침이 시급한 실정이다. 현재 소공간용 소화장치에 대한 KFI 인정기준은 제정되어 있는 상태지만 다양한 새로운 기술에 부합하지 못하고 있어 소공간 소화장치에 대한 세분화된 법적기준 마련이 필요한 실정이다. 이에 본 연구에서는 국내외적으로 큰 관심을 받고 있을 뿐만 아니라 현재 KFI 인정기준으로도 제정되어 있는 고체에어로졸 소화장치가 B,C급 배전반, 분전반 등의 소공간 화재에 미칠 수 있는 소화성능을 실험적으로 분석하고 고체에어로졸 소화장치의 소공간화재 적합성 여부를 고찰해보고자 한다.

  • PDF

2유체 미세 물분무 소화노즐의 분무유동 특성 (Spray Flow Characteristics of Twin-fluid Water Mist Nozzle for Fire Suppression)

  • 김봉환;최효성;김동건
    • 한국기계가공학회지
    • /
    • 제10권3호
    • /
    • pp.60-66
    • /
    • 2011
  • In the present investigation, experimental studies were conducted on the fire suppression performance of twin-fluid water mist spray which is subjected to thermal radiation in a closed space. Downward-directed water-mist sprays, interacting with an under kerosene pool fire, were investigated in a test facility. The mass mean diameter of water-mist droplets were measured by PMAS under various flow conditions. The developed twin-fluid water mit spray nozzle satisfied the criteria of NFPA 750, Class 1. The mechanism of fire suppression by fine water mist was concluded to be the cooling of the fire surface which leads to the suppression of fuel evaporation. It was proved that the automatic twin-fluid water mist spray system under lower pressures could be applied to an industrial facilities.

배관 재료의 물성을 고려한 내진설계 방법에 관한 연구 (A Study on Seismic Design Method Considering Physical Properties of Piping Material)

  • 방대석;이재오
    • 한국화재소방학회논문지
    • /
    • 제32권2호
    • /
    • pp.38-47
    • /
    • 2018
  • 본 연구에서는 배관 재료의 물성을 고려한 공학적 내진설계방식과 소방시설의 내진설계의 기준에 따른 사양위주의 설계방식에 대하여 비교 분석하였다. 배관 재료의 물성을 고려한 내진설계 방식의 경우는 배관에서 발생되는 비틀림 응력과 굽힘 응력의 합성 값을 통해 배관의 안전성을 분석하게 된다. 하지만 사양위주의 설계방식의 경우는 배관 재료의 안전성이 아니라 배관이 움직이는 힘을 해석하여 흔들림 방지버팀대가 견딜 수 있는지 여부를 해석하고 있다. 소화배관은 하나의 연결된 구조체로 일정구간에서 발생되는 흔들리는 힘을 통해서는 배관의 안전성을 보장받을 수 없기 때문에 배관 재료의 응력과 변위의 안전성 분석을 통해서 가능하다. 그러므로 안전성 있는 소화 설비 배관의 내진설계를 위해서는 배관 재료의 물성과 건축 구조물의 내진성능을 고려한 해석방법을 적용할 필요가 있다.

건축용 압출법 단열판(XPS)의 자기소화성에 대한 실험적 연구 및 제도적 관리에 관한 제언 (Experimental Study on the Self-extinguishing Performance of Extruded Polystyrene Insulation for Buildings and Suggestions on Institutional Management)

  • 강정기;최돈묵
    • 한국화재소방학회논문지
    • /
    • 제34권3호
    • /
    • pp.141-149
    • /
    • 2020
  • 한국산업표준(KS)은 발포 플라스틱 제품에 대하여 소형화염에 의한 수평 연소성의 측정 방법 및 시험절차를 규정(KS M ISO 9772:2018)하고 측정 결과에 대한 압출법 단열판(이하 XPS)의 자기소화성과 관련한 성능 및 기준을 KS 규격(KS M 3808:2020)에서 규정하고 있다. KS 규격에 적합함을 인증 받은 제품은 연소성(이하 '자기소화성')을 가지고 있어야 함에도 공사현장에서 용접불티 등에 의해 착화 및 확산되어 대량의 인명과 재산 피해가 발생하고 있는 실정이다. 본 연구에서는 KS 인증을 받고 시중에 판매 중인 5개사의 XPS 단열재를 구입하여 공사현장에서 발생되는 용접불티에 의한 착화 및 확산 여부를 실험하였다. 실험결과, 5개사의 제품 중 3개사는 성능의 차이는 있으나 자기소화성이 있는 것으로 확인되었으나, 2개사는 쉽게 착화 및 확산되어 자기소화성이 있다고 보기 어려웠다. 동종의 제품에 대하여 KS 규정에 따른 실험결과, 용접불티에 의해 착화되었던 제품 2종을 포함한 총 3종의 제품이 KS M 3808에서 규정한 자기소화성이 없는 것으로 확인되었다.

오픈소스 하드웨어를 사용한 저비용 열화상 잔불탐지 장치 개발 (Development of a Low-Cost Thermal Image Hidden Fire Detector Using Open Source Hardware)

  • Moon, Sangook
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1742-1745
    • /
    • 2019
  • Hidden flame detection after allegedly extinguishing a fire cannot be emphasized enough. There are a few commercial hidden fire detection equipments which are imported, but the cost is relatively high. In this contribution, we propose a development of a low-cost, high-performance hidden flame detector using open-source hardware/software. We use Raspberry-pi based hardware board equipped with a TFT touch-screen LCD, a 3G modem, and an attachable battery device altogether integrated in a plastic case fabricated with a 3D printer. The proposed hidden flame detector shows the same performance of a commercial product FLIR E5 while consuming less than a half of the cost.

계면활성제 첨가에 따른 함수율에 관한 실험적 연구 (Experimental Study on Moisture Content According to Addition of Surfactants)

  • 김남균;이동호
    • 한국화재소방학회논문지
    • /
    • 제29권2호
    • /
    • pp.79-83
    • /
    • 2015
  • 화재사고는 그 충격과 영향이 업무중단 및 기업의 존폐를 좌우 할 수 있는 대표적인 재난 유형이다. 따라서 사전 예방, 대비는 물론 재난 발생 시 신속한 초기대응이 매우 중요하다. 현재 운용되고 있는 저탄장 및 합판 가공 산업 분야 등에서는 다공성 가연물의 저장이 불가피하다. 다공성 가연물 저장 공간의 화재는 그 특성상 발화시점의 파악 및 초기진압이 어려우며, 초동 대처에 실패할 경우 표면화재에서 심부화재로 이어져 2차 화재피해가 발생할 가능성이 높다. 또한 심부화재는 다량의 독성가스발생과 재발화로 인해 인적 물적 피해를 야기할 수 있으므로 다공성 가연물을 취급하는 저장공간을 중심으로 피해경감 대책이 요구된다. 본 연구는 침윤소화약제 사용 시 다공성 물질의 심부화재 소화 효율 증대에 관한 기초 연구로써, 계면활성제의 농도에 따른 침투성능의 향상에 관한 연구를 수행하였다. 실험에 사용된 다공성 물질은 국내 사용 목재의 75%를 점유하고 있는 뉴질랜드산 소나무의 원목 목분을 사용하였다. 소화용수는 침윤소화약제에 사용되고 있는 Butyl Di Glycol (BDG)을 선택하여 농도에 따른 표면장력별 표준시료를 제작하여 실험을 수행하였다. 실험은 NFPA 18의 Deep-Seated Fire Test를 기초로 수행하였으며, 살수량과 다공성 물질 내부로의 침투량, 다공성 물질 외부로의 배출량 측정 실험을 실시하였다. 실험결과 계면활성제 농도에 따른 표면장력이 감소함에 따라 거시적 침투속도는 감소하나 다공성 물질 내부로의 침투량은 증대되는 특성을 확인하였다.

목조건축 문화재의 화재방호를 위한 법규 개선에 관한 연구 (The Study on the Legal Improvement for Fire Protection in Wooden Architectural Heritage)

  • 김동철;노삼규;함은구
    • 한국화재소방학회논문지
    • /
    • 제29권1호
    • /
    • pp.19-26
    • /
    • 2015
  • 본 연구는 목조건축 문화재의 화재방호를 위하여 설치되고 있는 소방시설 설치기준에 관하여 법체계 및 제도적 장치 확보에 관한 사항이다. 목조건축 문화재의 화재방호를 위해 설치되고 있는 소방시설과 현행 법제도를 고찰함에 따라 문제점이 나타났으며, 법정 소방설비와 자체진화 소방설비 등의 구축과정에서 화재방호성능, 기술기준, 책임소재 등의 문제점을 확인하였다. 이를 개선하기 위해 목조건축 문화재는 화재방호 시설을 구축하더라도 문화재 원형보존의 원칙은 최소한 확보되어야 하므로 소방시설은 화재 특성을 고려하여 화재방호 성능이 확보될 수 있도록 설치기준을 법으로 규정할 필요가 있다. 목조건축 문화재 소방시설 구축 시 성능확보를 위하여 설계 시공 및 감리제도의 법정화를 통한 구축시스템 개선 방향을 제시하였으며, 소방시설 기술기준의 법정화를 제안한다.

가스계 소화시스템용 소화약제 저장용기 누설 검출 무선 시스템 개발 (Development of Monitoring RF System on Leakage of Gas Cylinder in Gaseous Fire Extinguishing System)

  • 소수현;오주환;차철웅;이대근
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 추계학술논문발표회 논문집
    • /
    • pp.7-10
    • /
    • 2008
  • In our study, Monitoring RF System in real-time on leakage of gas cylinder is developed. The system is consisted of Pressure Transmitting part, Main Controller and Operating program. The pressure data of gas cylinder are transmitted to the modem of main controller part by RF module of Pressure Transmitting part and the data received through the modem are recorded in real-time and showed the situation of gas cylinder on the PC monitor. Through the test on the case of the artificial pressure-reduction, the detecting performance. of the developed system is conformed.

  • PDF