• 제목/요약/키워드: Fire Spreading

검색결과 128건 처리시간 0.024초

입경 변화에 따른 퇴적금속 분체층의 화염전파 (Flame Spreading Over Metal Dust Deposits With Particles Size)

  • 한우섭;최이락;한인수;이정석
    • Korean Chemical Engineering Research
    • /
    • 제48권5호
    • /
    • pp.603-608
    • /
    • 2010
  • 퇴적금속분체의 입경 변화에 따른 화염전파 거동과 발화특성을 자체 제작한 실험장치와 열중량분석 시험장치를 활용하여 조사하였다. 이를 위하여 평균입경이 다른 Mg, Ti를 포함한 Zr, Ta, Mg-Al(90:10 wt%)의 금속분진과 PMMA 시료를 사용하였다. 그 결과, 금속 퇴적층의 두께가 5 mm 이상의 경우에는 화염전파속도의 퇴적층 두께에 대한 의존성이 나타나지 않았다. 평균 입경이 작을수록 Ti는 화염전파속도가 증가하지만 Mg의 경우에는 화염전파속도가 감소하였다. 평균입경 $51{\mu}m$에 있어서 Mg퇴적분체는 Mg-Al(90:10%wt)합금 퇴적분체에 비하여 화염전파속도가 약 50%가 감소하였다. 본 연구에서 조사한 금속분체 산화물층 두께는 화염전파속도와 반비례하는 경향을 보였으며 입경 변화에 따른 영향은 나타나지 않았다. 또한 Ti와 Mg의 열중량 분석시험 결과, Mg는 $550^{\circ}C$, Ta는 $578^{\circ}C$에서 발화에 의한 연소로 판단되는 중량 증가가 관찰되었다.

복잡한 CAD 형상의 매개변수화를 통한 3차원 경계면 레벨-셋 알고리즘 개발 및 적용 (A Level-set Parameterization for Any 3D Complex Interface Related to a Fire Spread in Building Structures)

  • 김현준;조수영;이영헌;여재익
    • 한국항공우주학회지
    • /
    • 제48권2호
    • /
    • pp.135-146
    • /
    • 2020
  • 경계면을 정의하는 기존의 레벨-셋 기법은 대개 수학적인 수식을 이용한다. 그러나 3차원 데카르트 좌표계에서 복잡한 경계면을 수식으로 설정하는 방식은 거의 불가능하다. 이러한 이유로 우리는 보편적으로 사용되는 스테레오리쏘그래피(STL) 형식을 매개 변수화하여 3D 캐드 형상의 내부와 외부를 구분하는 레벨-셋 경계면 설정 알고리즘을 개발하였다. 본 논문은 반응막대 실험 모사를 통해 기존의 경계면 설정 방식과 새로운 경계면 설정 방식 결과와 비교하여 이 알고리즘이 적용된 하이드로 다이내믹 솔버의 타당성을 확보하였다. 이를 통해 가연성 기체로 채워진 다양한 형상 안에서 충격파와 상호작용이 연소 폭발 천이 현상에 미치는 영향을 수치적으로 해석하였다. 또한, 실제 크기의 공장 설비에서 화염이 퍼져나가는 과정과 데토네이션 발생이 설비에 미치는 피해를 수치적으로 예측하는 시뮬레이션을 진행하였다.

횡류식 제·배연 시스템의 개선 및 적용성 분석을 위한 모형실험 연구 (Scaled model tests for improvement and applicability of the transverse smoke control system on tunnels)

  • 김효규;백두산;김재현;이성원;유지오
    • 한국터널지하공간학회 논문집
    • /
    • 제22권5호
    • /
    • pp.563-574
    • /
    • 2020
  • 현재 도로터널과 철도터널에서는 화재시 발생한 유독가스 및 연기를 배출하기 위하여 제·배연시스템을 구축하고 있다. 다양한 제·배연 시스템 중 횡류식 제·배연시스템은 풍도의 중간을 구획하여 급기 또는 배기를 수행함에 따라 터널 본선 전단면에 급기 또는 배기가 되는 것이 아니라 터널 본선의 절반 부분만 급기 또는 배기가 수행되는 단점을 지니고 있다. 따라서 본 연구에서는 횡류식 제·배연시스템의 한계점을 개선한 조닝방식에 대하여 수치해석과 모형시험을 통해 제·배연 효과를 분석하였다. 모형시험의 결과 제·배연이 이루어지지 않은 상태를 기준으로 횡류식 제·배연시스템은 25.6%의 배연율을 나타내었고, 조닝을 통한 제·배연시스템은 40.8%의 배연율을 나타내었다. 또한 수치해석결과 횡류식 제·배연시스템은 본선터널에서 확산되는 화재연기를 차단하지 못하고 지속적으로 확산 되는 양상을 보이는 것으로 나타났다. 한편, 조닝방법을 통한 제·배연시스템은 에어커튼 효과 및 배연 효과로 인하여 화재연기가 일정구간 내에 제연 되는 것으로 나타났다.

경관훼손지의 생태적 복구방안에 관한 연구 (A Study on the Ecological Restoration Strategies for the Disturbed Landscapes)

  • 김남춘
    • 한국환경복원기술학회지
    • /
    • 제1권1호
    • /
    • pp.28-44
    • /
    • 1998
  • This study was conducted to suggest the ecological restoration strategies for the disturbed landscapes by theoretical study. Especially, it is aimed to suggest three objectives for restoration by using native plants ; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Cooperation between restoration ecologists and restoration practitioners is needed to delineate a scientific approach to restoration ; (1) Being aware of published literature that describes similar work and/or establish general principles. (2) Preparedness to carry out proper experiments to test ideas. (3) Preparedness to monitor fundamental parameters in a restoration scheme. (4) Providing information about the behavior of species. (5) Publish results. 2. There are three models of succession in theories of plant succession. The tolerance and facilitation models were recommended to ecological restoration. The inhibition model applies in most secondary succession, but the actual species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. 3. The objectives of erosion control, wildlife habitat provision, and visual quality improvement are not mutually exclusive. However, many revegetation practices in the past have emphasized one of these aspects at the expense of the others. 4. A native plant community can be the model of ecological restoration. By stylization/abstraction of native plant community, trying to learn the most essential characteristics of community types - environmental factors ; dominant, prevalent, and "visual essence" species composition - in order to use such information in restoration. 5. After developing mass/spaces plan, match plant communities to the mass/space plan. In utilizing community grouping, there needs aesthetic ability to understand design elements. 6. Several hydrophytes such as Pennisetum saccharifluous, Themeda triandra, Cirsium pendulum show relatively good germination rates. In case of mesophytes and xerophytes, Arundinella hina, Artemisia princeps, Oenothera odorata and legumes seem to have quick-germinating abilities at barren sites. Pinus thunbergii, Rhus chinensis, Evodia daniellii, Alnus firma and Albizzia julibrissin can be considered as "late succession" woody plants because they show low germinating rates and slow growing habitat. 7. The seeds used for restoration should be collected within a certain radius of where it will be planted. Consideration in genetic issues in the collection and use of germplasm can increase the odds for successful restoration efforts. 8. The useful model in the "drift" pattern occurs so abundantly in naturally evolving landscapes. As one species diminishes in density, a second or third species are increased. Thus, dynamic interactions between species are created. Careful using of "drift phenomenon" in planting was recommended. 9. Virtually no stand of vegetation today is immune from the introduction and/or spreading of exotic species. Therefore, the perpetuation of a restored sites requires conscious monitoring and management. Thus, management would be the most important process in ecological restoration. 10. In order to keep the sites "natural", alternative management strategies would be applied in management ; Atenative management strategies are decelerating successional process, accelerating successional processes or modifying species composition. As management tools, mechanical, chemical, biological or environmental factor manipulation, e.g., fire could be used.

  • PDF

정밀안전진단 결과를 활용한 NATM (철근)의 라이닝 결함 종류별 발생원인 및 분석 - Part I (Analysis and cause of defects in reinforced cement concrete lining on NATM tunnel based on the Precise Inspection for Safety and Diagnosis - Part I)

  • 추진호;이인모
    • 한국터널지하공간학회 논문집
    • /
    • 제21권1호
    • /
    • pp.1-29
    • /
    • 2019
  • NATM (무근)터널의 라이닝 균열을 분석한 논문과 연계하여 NATM (철근)터널의 결함을 정밀안전진단 사례를 정리하여 결함별 원인을 분석하고자 하였다. NATM (철근)터널에서 콘크리트라이닝은 그 역할에 따라 철근과 같은 보강재를 사용하게 된다. 지반이 불량하거나 안전성 확보를 위한 라이닝 두께의 증가는 굴착단면의 증가와 라이닝 타설 물량의 증가를 유발하나, 철근보강 단면을 설계하여 경제성과 안전성을 함께 도모하게 된다. 시설물안전법에 의한 국내 1종 터널 시설물 중에서 NATM으로 시공된 구간에 철근보강을 실시한 라이닝의 결함 특성을 정리하여 형태별 발생원인을 분석하고자 하였다. 단철근, 복철근과 무근라이닝에 발생되는 균열을 비교하여 철근으로 인한 균열제어 효과를 분석하였다. 다양한 위치에서의 철근노출 사례와 함께 기술하였고 터널에서 고려될 수 있는 라이닝 두께 부족의 원인으로 정밀시공 미흡, 박락, 공용중 라이닝 화재에 의한 폭열, 지진, 용탈의 사례를 기존 연구와 비교하여 분석하였다. 향후 본 연구를 통해 정밀안전진단(터널) 세부지침의 보완 및 개정방향 등을 제시하고자 한다.

17세기 이후 장흥 보림사(長興 寶林寺)의 경관요소 해석 (Interpretation of Landscape Elements in Borimsa Temple after 17th Century)

  • 김규원;심우경
    • 한국전통조경학회지
    • /
    • 제33권1호
    • /
    • pp.110-118
    • /
    • 2015
  • 구산선문 중 가지산문 장흥 보림사는 문화 생태경관적으로 중요한 위치에 있는데도 조경분야의 연구가 부족하다. 본 연구로 17세기 이후 장흥 보림사 경관요소의 변화를 고찰하여 그 가치를 새롭게 인식하고 조경사적 위치를 확인하고자 하였다. 본 연구는 전남 장흥 보림사 일원의 경관요소에 대해 현장답사와 사적기(事蹟記), 중창기, 1928년 후지시마 가이지로(藤島亥治郞)의 보림사 실측도, 조선고적도보(朝鮮古蹟圖譜) 등의 관련 고문헌과 보림사정밀지표조사보고서, 국가기록원 및 전남 장흥의 과거 사진자료를 통해 경내 건축물과 지당, 사찰림 등의 경관요소의 변화를 고찰해보고자 하였으며 연구의 결론은 다음과 같다. 첫째, 보림사의 입지는 보조선사탑비의 내용을 통해 풍수적으로 길지에 위치함을 알 수 있으며 십육나한상과 천불로 비보하려했음을 알 수 있었다. 중국의 남화선사와 비교했을 때, 주변의 환경구성은 비슷하지만 단을 쌓아 건물을 배치한 것은 차이점으로 보였다. 둘째, 보림사의 건축경관은 일제강점기와 한국전쟁을 거치고 현재까지 경관의 변화가 이어지고 있는 상태이므로 과거 경관자료 아카이브 구축 등의 조치가 필요하다고 판단되었다. 셋째, 보림사의 지당은 보림사사적기의 내용으로 보아 가장자리에 돌을 쌓아 만든 부정형이었을 것으로 판단되며 중창기의 내용을 통해 지당의 이름을 용천(湧泉)으로 추정해볼 수 있다. 또한 현재의 경관은 과거의 사진과 비교해보았을 때 경내 지반사업으로 인한 지표의 상승으로 변형을 가져온 것으로 보였다. 넷째, 보조선사탑비와 보림사사적기에 언급되고 있는 장생표주(長生標柱)는 한국전쟁 이전 사진자료에서 나타난 대웅보전 앞의 마른 향나무로 추측하고 있으나 도갑사의 국장생과 황장생을 참고하였을 때 석비형으로 추정되었다. 또한 보림사 중창기에 나타난 홍살문은 병자호란이후 승군의 충성에 대한 사액으로 세워진 것으로 확인되었다. 다섯째, 보림사 중창기에서 보림사의 연못 조성 등 사찰경관요소 조성 시 풍수지리를 고려하였음을 알 수 있었으며 또한 소나무, 보리수, 감나무의 식재기록이 나타나고 있었다. 여섯째, 차나무림은 정약용의 구증구포법 전수와 초의선사의 보림백모차, 이유원의 가오고략 등 관련 문헌을 통해 통일신라부터 시작된 선차일여의 다맥을 이어오고 있음이 확인되었다. 일곱째, 비자나무림은 관련 고문헌을 통해 비자가 국가의 제사와 의료약품으로 쓰였고 항공사진 및 보호림 지정구역의 위치를 통해 비자림이 내화수림대의 역할도 하는 것으로 확인되었다.

설비공학회 분야의 최근 연구 동향 : 2015년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2015)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제28권6호
    • /
    • pp.256-268
    • /
    • 2016
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

한국의 지역개발과 댐건설 (Regional Development And Dam Construction in Korea)

  • 안경모
    • 물과 미래
    • /
    • 제9권1호
    • /
    • pp.38-42
    • /
    • 1976
  • Because of differences in thoughts and ideology, our country, Korea has been deprived of national unity for some thirty years of time and tide. To achieve peaceful unification, the cultivation of national strength is of paramount importance. This national strength is also essential if Korea is to take rightful place in the international societies and to have the confidence of these societies. However, national strength can never be achieved in a short time. The fundamental elements in economic development that are directly conducive to the cultivation of national strength can be said to lie in -a stable political system, -exertion of powerful leadership, -cultivation of a spirit of diligence, self-help and cooperation, -modernization of human brain power, and -establishment of a scientific and well planned economic policy and strong enforcement of this policy. Our country, Korea, has attained brilliant economic development in the past 15 years under the strong leadership of president Park Chung Hee. However, there are still many problems to be solved. A few of them are: -housing and home problems, -increasing demand for employment, -increasing demand for staple food and -the need to improve international balance of payment. Solution of the above mentioned problems requires step by step scientific development of each sector and region of our contry. As a spearhead project in regional development, the Saemaul Campaign or new village movement can be cited. The campaign is now spreading throughout the country like a grass fire. However, such campaigns need considerable encouragement and support and the means for the desired development must be provided if the regional and sectoral development program is to sucdceed. The construction of large multipurpose dams in major river basin plays significant role in all aspects of national, regional and sectoral development. It ensures that the water resource, for which there is no substitute, is retained and utilized for irrigation of agricultural areas, production of power for industry, provision of water for domestic and industrial uses and control of river water. Water is the very essence of life and we must conserve and utilize what we have for the betterment of our peoples and their heir. The regional and social impact of construction of a large dam is enormous. It is intended to, and does, dras tically improve the "without-project" socio-economic conditions. A good example of this is the Soyanggang multipurpose dam. This project will significantly contribute to our national strength by utilizing the stored water for the benefit of human life and relief of flood and drought damages. Annual average precipitation in Korea is 1160mm, a comparatively abundant amount. The catchment areas of the Han River, Keum River, and Youngsan River are $62,755\textrm{km}^2$, accounting for 64% of the national total. Approximately 62% of the national population inhabits in this area, and 67% of the national gross product comes from the area. The annual population growth rate of the country is currently estimated at 1.7%, and every year the population growth in urban area increases at a rising rate. The population of Seoul, Pusan, and Taegu, the three major cities in Korea, is equal to one third of our national total. According to the census conducted on October 1, 1975, the population in the urban areas has increased by 384,000, whereas that in rural areas has decreased by 59,000,000 in the past five years. The composition of population between urban and rural areas varied from 41%~59% in 1959 to 48%~52% in 1975. To mitigate this treand towards concentration of population in urban areas, employment opportunities must be provided in regional and rural areas. However, heavy and chemical industries, which mitigate production and employment problems at the same time, must have abundant water and energy. Also increase in staple food production cannot be attained without water. At this point in time, when water demand is rapidly growing, it is essential for the country to provide as much a reservoir capacity as possible to capture the monsoon rainfall, which concentarated in the rainy seaon from June to Septesmber, and conserve the water for year round use. The floods, which at one time we called "the devil" have now become a source of immense benefit to Korea. Let me explain the topographic condition in Korea. In northern and eastern areas we have high mountains and rugged country. Our rivers originate in these mountains and flow in a general southerly or westerly direction throught ancient plains. These plains were formed by progressive deposition of sediments from the mountains and provide our country with large areas of fertile land, emminently suited to settlement and irrigated agricultural development. It is, therefore, quite natural that these areas should become the polar point for our regional development program. Hower, we are fortunate in that we have an additional area or areas, which can be used for agricultural production and settlement of our peoples, particularly those peoples who may be displaced by the formation of our reservoirs. I am speaking of the tidelands along the western and southern coasts. The other day the Ministry of Agriculture and Fishery informed the public of a tideland reclamation of which 400,000 hectares will be used for growing rice as part of our national food self-sufficiency programme. Now, again, we arrive at the need for water, as without it we cannot realize this ambitious programme. And again we need those dams to provide it. As I mentioned before, dams not only provide us with essential water for agriculture, domestic and industrial use, but provide us with electrical energy, as it is generally extremely economical to use the water being release for the former purposes to drive turbines and generators. At the present time we have 13 hydro-electric power plants with an installed capacity of 711,000 kilowatts equal to 16% of our national total. There are about 110 potential dams ites in the country, which could yield about 2,300,000 kilowatts of hydro-electric power. There are about 54 sites suitable for pumped storage which could produce a further 38,600,000 kilowatts of power. All available if we carefully develop our water resources. To summarize, water resource development is essential to the regional development program and the welfare of our people, it must proceed hand-in-hand with other aspects of regional development such as land impovement, high way extension, development of our forests, erosion control, and develop ment of heavy and chemical industries. Through the successful implementation of such an integrated regional development program, we can look forward to a period of national strength, and due recognition of our country by the worlds societies.

  • PDF