• 대한원격탐사학회지
• /
• 제38권5_2호
• /
• pp.661-667
• /
• 2022

원격탐사와 GIS를 활용한 공간자료 분석은 재난 관리에 효율적인 기술로 이를 활용한 재난정보 제공을 위한 자료 분석 및 기술 개발에 관한 연구가 활발히 진행되고 있다. 특히 군집위성의 발사와 다양한 원격탐사 플랫폼의 활용, 취득된 데이터 처리 및 저장 능력의 향상, 인공지능 기술의 발달 등으로 인해 재난 관리를 위한 원격탐사와 GIS 기술의 활용은 많은 발전의 여지를 가지고 있다. 이번 특별호에는 재난의 예측, 감시 그리고 대응 단계에서 선박탐지, 건축물 추출, 해양환경 감시, 홍수탐지, 산불탐지, 그리고 재난 발생시 의사결정지원에 적용 가능한 원격탐사와 GIS 기술의 개발과 활용한 관련한 10편의 논문이 게재되었다. 이번 특별호에 출판된 논문들은 재난 관리 기술의 발전과 연관 학문 분야의 학술적 발전에 밑거름이 될 것으로 판단된다.

• 대한원격탐사학회지
• /
• 제36권5_1호
• /
• pp.775-784
• /
• 2020

최근 지구온난화 및 인간 활동 등에 의해 전지구적으로 산불발생이 빈번해지고 있으며, 산불의 규모가 대형화되고 지속기간이 길어지는 경향을 보이면서, 산불 피해 또한 급증하고 있다. MODIS는 20년 가까이 전지구 산불탐지 정보를 제공하고 있고, GK2A와 Himawari-8은 1일 144회의 빈도로 동아시아권의 산불감시를 수행하고 있지만, 1~2 km의 공간해상도는 중·소 규모 산불탐지에 있어서는 충분하지 않으므로 고해상도 위성영상을 이용한 산불탐지 연구가 반드시 필요하다. 그러나 타고있는 산불탐지(active fire detection)에 대한 고해상도 산출물은 현재 공식적으로 존재하지 않는다. 이에, 본연구에서는 Landsat 8 산불탐지 알고리듬을 구현하여 고해상도 산불탐지를 수행하였으며, 최근의 대표적인 산불사례인 2019년 12월 호주 대형산불에 대하여 Landsat 8 탐지 결과를 Himawari-8, MODIS 산출물과 비교하였다. 강한 산불의 경우에는 세 위성 모두 유사한 결과를 보였지만, 타기 시작하거나 진화되고 있는 약한 산불 및 좁은 지역에 발생한 산불은 30m 해상도의 Landsat 8에서만 탐지되었고, 1~2 km 해상도의 Himawari-8나 MODIS에서는 탐지되지 않는 경향이 있었다. 우리나라와 같이 소규모 산불이 대부분인 경우에는 Landsat 8, Sentinel-2, Kompsat-3A, 그리고 2021년 발사예정인 Kompsat-7과 같은 고해상도 위성을 이용한 산불탐지가 가능할 것이며, GK2A, Himawari-8, Fengyun-3 등 동아시아 정지궤도 위성의 탐지결과와 함께 종합적인 분석을 수행한다면, 시간해상도와 공간해상도를 현재보다 향상시키는 것이 가능할 것이다. 이러한 진보된 산불감시를 위해서는 우리나라의 복잡지형에 보다 적합한 한국형 고해상도 산불탐지 알고리듬의 개발이 무엇보다 선행되어야 할 것이다.

• 대한원격탐사학회지
• /
• 제35권6_2호
• /
• pp.1107-1115
• /
• 2019

산불 피해와 관련하여 위성영상을 활용한 분석은 넓은 면적을 빠르게 분석하는 장점이 있다. 본 연구에서는 2019년 4월 4일 속초에서 발생한 산불 피해에 따른 산림의 변화 탐지를 위해 7장의 Sentinel-2A영상을 활용하였다. 산불피해지역 분류 과정은 NBR(normalized burn ratio) 값의 전후 시기 차이를 나타낸 dNBR(difference normalized burn ratio)을 통해 산불피해 정도를 7가지 단계로 분류하였다. 분류과정에서 본 연구는 식생의 재성장지수가 높은 3지역을 선정하여 해당 지역에 대한 세밀한 공간 분석을 실시하였다. dNBR 분석 결과는 활엽수림보다 침엽수림의 식생 재성장 분류가 큰 폭으로 나타났으나, NDVI를 통한 결과에서 가장 낮은 평균값을 보여주었다. 이는 침엽수림의 dNBR 오차범위로 나타난다. 시계열 결과로는 4월 20일과 5월 3일 사이를 기준으로 산불피해 면적이 큰 폭으로 감소하였다. 이는 경과한 시기의 활엽수림에서 하층 식생의 발달 및 식생 증가에 따른 피해 완화로 예를 들 수 있다. 본 연구 결과는 발생하는 산불 피해에 대하여 산림 분류 별 면적 변화를 통해 변화 탐지를 실시하였으며, NDVI와 dNBR 비교를 통해 침엽수림이 가장 높은 분류 오차가 발생한다는 결론을 도출하였다. 따라서 dNBR을 통한 영상분류과정에서 현장조사를 동반한 정밀한 국내 산불피해 등급표를 개선해야 할 필요성을 제시하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.687-690
• /
• 2005

Recently there have been a lot of kinds of damages in forest area such as forest fires, forest pest, landslide so that the efficient methods to mange those information and the way to face them are deadly needed. In this study, there were preparing the various vegetation index map and comparing them with the field surveying the tried to figure out which vegetation index algorism is the best proper to present forest fire damaged area. These all were based on Landsat ETM+ satellite image (2000.10.16). The result of this study is to select the high correlation algorism among the various vegetation indexes and then construct the forest fire disaster map, the case of forest fires damaged area.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.946-948
• /
• 2003

This paper describes the development of an INS (Inertial Navigation System) integrated positioning system, which can monitor and track the firefighter's position for assisting effective fire-fighting activity and rescue services. The INS consists of highly accurate three-axis gyro sensor and three-axis accelerometer. By integrating an INS to positioning system, it is also possible to obtain the information of firefighter's physical state (e.g. standing, collapse and crouch) of posture including velocity. Consequently, this research would obviously make a contribution to effective rescue activities and safety of firefighters. Besides, this paper presents results from field tests conducted at Tokyo University demonstrating its viability and utility. We also summarize the overall system requirements and architecture, and describe the hardware and software used in the prototype system in detail.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2100-2101
• /
• 2008

This paper is studied on a protective control system for electrical fire and electrical faults due to over current or electric short circuit faults by using electrical thermal characteristics of PTC (Positive Temperature Coefficient) thermistor and current response characteristics of high sensitive reed switch. The PTC thermistor has characteristic of positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with BaTiO3_Ceramics of positive temperature coefficient. Also PTC thermistor shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point, and reed switch, which is used for electrical fault current sensing devices, have a excellent characteristic of response velocity in degree of ${\mu}s{\sim}ms$ that sensing magnetic flux in proportion to dimension of line current. This paper is proposed on a protective control system use PTC thermistor and reed switch for sensor which is protected from electrical fire due to overload faults or electric short circuit faults. Some experimental results of the proposed electric safety control device are confirmed to the validity of the analytical results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.186-188
• /
• 2005

Because forest fire changes the direction according to the environmental elements, it is difficult to predict the direction of it. Currently, though some researchers have been studied to which predict the forest fire occurrence and the direction of it, using the remote detection technique, it is not enough and efficient. And recently because of the development of the sensor technique, a lot of In-Situ sensors are being developed. These kinds of In-Situ sensor data are used to collect the environmental elements such as temperature, humidity, and the velocity of the wind. Accordingly we need the prediction technique about the environmental elements analysis and the direction of the forest fire, using the In-Situ sensor data. In this paper, as a technique for predicting the direction of the forest fire, we propose the correlation analysis technique about In-Situ sensor data such as temperature, humidity, the velocity of the wind. The proposed technique is based on the clustering method and clusters the In-Situ sensor data. And then it analyzes the correlation of the multivariate correlations among clusters. These kinds of prediction information not only helps to predict the direction of the forest fire, but also finds the solution after predicting the environmental elements of the forest fire. Accordingly, this technique is expected to reduce the damage by the forest fire which occurs frequently these days.

• 센서학회지
• /
• 제23권5호
• /
• pp.342-348
• /
• 2014

This paper introduced a novel multi-gas sensor detector with simple signal processing algorithm. This device was evaluated by investigating the characteristics of combustible materials using fire-generated smell and smoke. Plural sensors including TGS821, TGS2442, and TGS260X were equipped to detect carbon monoxide, hydrogen gas, and gaseous air contaminants which exist in cigarette smoke, respectively. Signal processing algorithm based on the difference of response times in fire-generated gases was implemented with early and accurately fire detection from multiple gas sensing signals. All fire experiments were performed in a virtual fire chamber. The cigarette, cotton fiber, hair, polyester fiber, nylon fiber, paper, and bread were used as a combustible material. This analyzing software and sensor controlling algorithm were embedded into 8-bit micro-controller. Also the detected multiple gas sensor signals were simultaneously transferred to the personnel computer. The results showed that the air pollution detecting sensor could be used as an efficient sensor for a fire detector which showed high sensitivity in volatile organic compounds. The proposed detecting algorithm may give more information to us compared to the conventional method for determining a threshold value. A fire detecting device with a multi-sensor is likely to be a practical and commercial technology, which can be used for domestic and office environment as well as has a comparatively low cost and high efficiency compared to the conventional device.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.297-300
• /
• 2006

The knowledge of fuel load and composition is important for planning and managing the fire hazard and risk. However, fuel mapping is extremely difficult because fuel properties vary at spatial scales, change depending on the seasonal situations and are affected by the surrounding environment. Remote sensing has potential of reduction the uncertainty in mapping fuels and offers the best approach for improving our abilities. This paper compared the results of object-oriented classification to a pixel-based classification for fuel type map derived from Hyperion hyperspectral data that could be enable to provide this information and allow a differentiation of material due to their typical spectra. Our methodological approach for fuel type map is characterized by the result of the spectral mixture analysis (SMA) that can used to model the spectral variability in multi- or hyperspectral images and to relate the results to the physical abundance of surface constitutes represented by the spectral endmembers. Object-oriented approach was based on segment based endmember selection, while pixel-based method used standard SMA. To validate and compare, we used true-color high resolution orthoimagery

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.