• 대한원격탐사학회지
• /
• 제35권6_4호
• /
• pp.1341-1350
• /
• 2019

본 연구는 산불 전후 KOMPSAT-3A 영상을 사용하여 산불피해지역을 분석하는 것을 목적으로 한다. KOMPSAT 시리즈 중 KOMPSAT-3A는 적외선 및 고해상도의 멀티 스펙트럼 밴드를 가진 VHR위성이다. 하지만, KOMPSAT-3A를 활용하여 산불피해강도를 분류하는 연구는 부족한 실정이다. 따라서 본 연구에서는 KOMPSAT-3A의 산불 피해강도를 분류하기 위한 새로운 알고리즘을 제시하는 것을 목표로 한다. 또한, 본 연구에서는 산불 피해지역에 대한 참조자료로 Sentinel-2로 생성한 dNBR을 사용하였다. 본 연구의 연구 지역은 2019년 4월 4일 강릉에서 발생한 산불 피해지역으로 선정하였다. 본 연구에서는 산불피해구간을 산정하기 위한 알고리즘으로 오픈 소스 통계 프로그램인 R software의 확률분포함수를 사용하였다. KOMPSAT-3A에서 산불 피해지역은 산불 전, 후 NDVI의 변화에 따라 생성되었다. 산불피해강도는 분포 함수의 표준 편차를 사용하여 각 등급 크기를 산정하였다. 총 5개 구간에 따른 산불 피해 강도가 효과적으로 분류되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.43-46
• /
• 2004

Through investing the criteria and evaluation for fire performance of interior components, this paper introduce the testing items and requirements for Flammability, Smoke density, and Toxicity properties of TTX(Tilting Train eXpress) interior parts. Next time, all trains including TTX will be occupied the components with superior fire-resistance and the sensing and monitoring system for fire in train.

• 대한원격탐사학회지
• /
• 제12권1호
• /
• pp.60-80
• /
• 1996

AVHRR(Advanced Very High Resolution Radiometer) on NOAA satellite provides data in five spectral, one in visible range, one in near infrared and three in thermal range. In this paper, application of NOAA/AVHRR data is studied for environment monitoring such as cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index, forest fire, flood, snow cover and so on. The analyses for cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index and forest fire showed reasonable agreement. But monitoring for flood and snow cover was uneasy due to the limitations such as cloud contamination, low spatial resolution. So this research had only simple purpose to identify well-defined waterbody for dynamic monitoring of flood. Based on development of these basic algorithms, we have a plan to further reseach for environment monitoring using AVHRR data.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.169-172
• /
• 2008

기존의 문헌들은 화재시 화재단계, 피난, 건물구조, 화재감지 등을 별개의 개념으로 정리하였으나 이 논문에서는 건축물 실내화재의 단계를 초기-성장기-Flash Over-감쇠기로 나누고 그에 해당되는 화재의 단계, 연소의 진행특성, 인간의 대응 특성, 화재의 동적방호, 화재감지를 정리하고 그로 인하여 인명보호, 재산보호를 실현할 수 있고, 나아가 경제성 측면에서도 검측할 수 있도록 연구를 하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.600-602
• /
• 2003

In Korea, fire is the second frequent disaster. A total of 32,966 fires were happened in 2002, and injured 2,235 people and damaged 12 million dollars. So, we developed several components related to fire in order to decrease these victims and the amount of damage and have applied those components to Daegu Fire Agency. In this paper, we describe the developing system. It consists of 5 major components: mobile fire facility management component, web service component, fire management component, fire server, and fire application. They were developed in object-oriented computing environment, ATL/COM and Visual C++. So, they have some advantages such as high reusability, full interoperability, and easy understanding.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1251-1258
• /
• 2023

Traditional markets are infrastructure with facilities and characteristics of very high population density. Recently, arcades have been installed through traditional market modernization policies, and aging infrastructure has been repaired. However, gas and electrical facilities of traditional markets cannot be easily replaced because of its high density. And because regular inspections are not conducted, management of facilities is on very poor condition. In addition, when a fire occurs in a traditional market, the fire easily spreads to nearby stores and is likely to spread to a large fire because of a lot of highly flammable substances. Smoke detectors and heat detectors are installed in most traditional markets to monitor fires, but malfunctions are frequent due to the nature of smoke detectors and heat detectors, and network facilities are not properly maintained. Therefore, in this study, gas detection sensors and flame detectors are additionally installed in Gwangmyeong Traditional Market, and a digital twin-based traditional market fire monitoring system is implemented in conjunction with existing sensors in the market's 3D model. With this digital twin based fire monitoring system, we can reduce the malfunctions of fire detect sensors, and can easily guide the evacuation route.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1006-1008
• /
• 2003

In this paper, we describe the development of a Southeast Asia environmental information web portal based on near real time MODIS Level 2 and higher level products generated from the direct broadcast data received at the Centre for Remote Imaging, Sensing and Processing (CRISP). This web portal aims to deliver timely environmental information to interested users in the region. Interpreted data will be provided instead of raw satellite data to reduce operational requirements on our system, and to enable users with limited bandwidths to have access to the system.

• 대한원격탐사학회지
• /
• 제17권1호
• /
• pp.85-97
• /
• 2001

인공위성영상(ETM+)을 이용하여 산불피해지역을 분석하기 위해 KT(Kauth-Thomas)변환기법과 IHS(Intensity-Hue-Saturation)변환기법을 적용하여 비교해 보고 산불피해등급지도를 작성하였다. 이 연구는 두 부분으로 나누어 수행되었는데, 그 첫 번째는 기하보정만 수행한 영상의 7, 4, 1밴드를 이용하여 IHS변환을 적용하여 단순 슬라이싱 기법으로 산불피해지역을 피해 정도별로 등급화 하는 것이 가능한가를 분석하였다. 그 결과 각 컴포넌트에서 클래스의 분광 특성이 서로 겹쳐서 단순 슬라이싱 기법으로는 적절한 분류가 이루어지지 않았다. 두 번째는 방사 및 지형보정을 한 영상을 각각 IHS와 KT변환기법으로 변환시킨 후 최대우도법을 이용해 분류하였다. 현장데이타가 부족하여 cross-validation을 수행하였으며, 일관되게 KT변환기법에 의한 분류가 IHS기법에 의한 분류보다 더 좋은 결과를 보여주었다. 또한 KT feature space와 IHS 컴포넌트의 분광분포를 그래프 상에서 분석해 보았다. 이 연구에서는 KT변환기법이 IHS변환기법보다 산불피해지역을 추출함에 있어 더 높은 정확도를 나타내고, 산불과 관련된 지표의 물리적 특성을 더 잘 반영함을 볼 수 있었다.