• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.520-526
• /
• 2009

This study proposed the optimum design values for the biological clean room system observing the regulations of Hazard Analysis Critical Control Point (HACCP). Even though the standard for industrial clean room system has been well established, the basis for biological food clean room system is the first stage. In order to prevent the contaminations in advance for food storages, processes, and distributions, the criterion of Hazard Analysis Critical Control Point is positively required. This study also suggested the possible ways of how to avoid the hazardous contaminations.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.42-47
• /
• 2009

The flash point and the AIT(auto-ignition temperature) are the most important combustible properties used to determine the potential for the fire and explosion hazards of flammable material. In order to know the accuracy of data in MSDS(Material Safety Data Sheet), the flash point of n-acids were measured by using Pensky-Martens closed cup tester(ASTM D93), Setaflash closed cup tester(ASTM D3278), Tag open cup tester(ASTM D1310) and Cleveland open cup tester(ASTM D92). Also, the AIT of n-acids were measured by using ASTM E659-78 tester. The measured the flash points and the AIT were compared with literatures and MSDS in KOSHA. The measured the flash points and the AIT were different from those in literatures and MSDS. Therefore, This paper shows that it is needed to investigate the MSDS compatibility of n-acids for the fire safety objectives.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.140-145
• /
• 2002

The Flash Point is one of the most important combustible properties used to determine the potential for fire and explosion hazards of chemical materials. An accurate knowledge of the flash point is important in developing appropriate preventive and control measures in industrial fire protection. The lower flash points for the Water + n-Propanol systems were measured by using Pensky-Martens closed cup tester. The experimental data were compared with the values calculated by the laws of Raoult and van laar equation. The calculated values based on the van Laar equation were found to be better than those based on the Raoult's law.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.19-24
• /
• 2008

Recently, the buildings have gradually become higher, more massive and more complex with high growth of economy and varieties of the patterns of people's living. Therefore we study a performance and Improving Methods of the fire compartment as a measure to minimize the damage of the people and property from the fire. Currently, under the economic crisis situation, we do not consider about prevention of disaster safety enough; safety investment evasion, safety carelessness, and management relaxation etc. Also in the aspect of regulation system, industrial technology and plan engineering, Korean techniques of preventing fire disasters are far behind of other advanced nations. At this point, we are in need of improving about it. When considering like this situation, we need more studies on the practical improvement in order to assure fire prevention for buildings. The fire compartment prevent from magnifying the fire to the wide area by compartment into specific area. From this, it is possible to minimize fire damage and property and secure emergency exit for life safety. This fire compartment has primary function to extinguish fire easily, and the openings and penetrations are important passage which makes the smoke and fire go away from the fire area to the contiguous space. This study suggests improving methods of domestic fire compartment efficiency standard through comparative analysis of overseas advanced provision and domestic provision about base element of the building fire prevention.

• 열처리공학회지
• /
• 제13권5호
• /
• pp.309-317
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we investigated the strength of fire resistance steel for frame structure by tensile test after degradation treatment and analysed acoustic emission signals obtained from tensile test with time frequency analysis methods. In the T and TN specimens(under $600^{\circ}C$-10min ) consisting of ferrite and pearlite structure, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$-10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point and the second after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min, many signals were observed before yield point and were decreased after yield point.

• 한국화재조사학회지
• /
• 제3권1호
• /
• pp.12-15
• /
• 2003

The purpose of this study is to distinguish the causes of broken glass from doors or windows when it is found being originally kept among the remains on the floor in fire site - whether it was broken due to heating or by outer power through test and the properties of the broken plane including the pattern on the plane. Addition to it, the study tries to find characteristics for judging the point and direction of breakdown through the analysis of glass broken by outer power. With two causes assumed - a. breakdown due to heating and b. breakdown due to outer power - 3 pieces of glass plates $(30cm{\times}30cm{\times}5mm)$ for each case were tested, getting the results as following: 1. For the glass broken due to the change of temperature The broken plane is of slow curve and smooth without any pattern. 2. For the broken due to outer power With the impact point as the center, the shows breakdown of radial type and the side shows breakdown of near-perpendicular type. The far the broken piece is from the impact point, the bigger the size is. The broken piece at the impact point is of long triangle type and the two long planes of the triangle shows semi-arc with the center of breakdown point and the other plane shows opposite pattern 3. Change of the pattern and type of the glass due to outer power The pattern and type of the glass due to outer power shows change due to heatihg.

• 동의생리병리학회지
• /
• 제18권3호
• /
• pp.713-723
• /
• 2004

With regard of YinYang and Five Elements Theory, predominance of Yin or Yang is a key point to discuss Nourishin Ying or Reinforcing Yang. There are two major branches about studying predominance of Yin or Yang. Zhu Danxi advocated the theory that Yang was always in excess while Yin was often deficient, and thus belonged to the School for Nourishing the Yin. Zhang Jie-bin advocated that Yang is easily deficient while Yin is easily sufficient. It seems that they studied Wang Bing's 'Ministerial fire rule on all thing instead of Imperial Fire' and right Kidney Mingmen theory in Nan Jing, which are both related to the First Yang in the Book of Changes and say Mingmen fire is the host of the body. Zhu Danxi insisted that Mingmen fire was easily in excess and likely to become pathogenic fire while Water phase was easily in deficiency, so the doctors should nourish Yin and suppress Yang. Zhang Jie-bin said that Mingmen fire is vulnerable so the doctors should fortify yang and reinforce Mingmen fire. Suk Gock Master Lee thought that the Book of Changes and Nei Jing had a viewpoint of Fortify Yang as regards of some distinguished Physicians' articles about predominance of YinYang. The author's going to discribe Suk Gock's Fortify Yang Theory with viewpoints of Nei Jing and the Book of Changes.

• Earthquakes and Structures
• /
• 제5권4호
• /
• pp.379-394
• /
• 2013

Post-earthquake fire (PEF) can lead to a rapid collapse of buildings damaged partially as a result of prior earthquake. Almost all standards and codes for the design of structures against earthquake ignore the risk of PEF, and thus buildings designed using those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the Immediate Occupancy, Life Safety and Collapse Prevention performance levels of structures, designed to the ACI 318-08 code, after they are subjected to an earthquake level with PGA of 0.35g. This investigation is followed by a fire analysis of the damaged structures, examining the time taken for the damaged structures to collapse. As a point of reference, a fire analysis is also performed for undamaged structures and before the occurrence of earthquake. The results indicate that the vulnerability of structures increases dramatically when a previously damaged structure is exposed to PEF. The results also show that the damaging effects of post-earthquake fire are exacerbated when initiated from the second and third floor. Whilst the investigation is made for a certain class of structures (conventional buildings, intermediate reinforced structure, 3 stories), the results confirm the need for the incorporation of post-earthquake fire into the process of analysis and design, and provides some quantitative measures on the level of associated effects.

• 한국화재소방학회논문지
• /
• 제17권1호
• /
• pp.1-7
• /
• 2003

통상 소형 건물이나 일반주택은 자동화설비 대신 수동식소화기에 의존하고 있어서 사람이 없거나 노약자만 있을 시에는 화재에 매우 취약하다. 이에 대한 대책으로 발생한 화재를 초기에 자동으로 진압할 수 있도록, 자동감지장치가 탑재된 경제성 있는 자동식소화기가 개발되었다. 본 논문에서는 이에 대한 소화 특성을 현장 화재시험을 통하여 규명하고 그 실용화 방향을 제시하였다. 실험 결과, 제반성능은 우수하였으나, 열감지부인 이융성금속의 작동시간이 공간크기에 따라 크게 변화하고 5분을 초과하는 경우도 발생하므로, 이를 $ 12\m^2$이내의 공간에 대하여 작동시간을 3분 이내로 단축하기 위해서는 용융온도가 더욱 낮은 금속을 사용하고, 설치 위치도 1.5 m 이하보다는 천장부로 하는 것이 바람직한 것으로 나타났다.

• 한국화재소방학회논문지
• /
• 제14권3호
• /
• pp.19-26
• /
• 2000

화학물질의 기본적인 물리적 특성으로서 인화점은 화학물질에 의한 재난방제에 있어서 중요한 인자 중에 하나이다. 많은 혼합물에 대한 체계적 자료는 매우 빈약하여 이들 물질에 대한 인화점 측정은 어렵다. 따라서 화학적으로 합성과정에 있는 물질 뿐 만 아니라 현재 제품으로 사용하고 있는 물질의 물리화학적 특성을 모두 실험에 의하여 구하는 것은 현실적으로 곤란하다. 본 연구의 관심은 화학적 구조와 인화점 사이에 관계를 이용한 유기개념도를 이용하여 화학적 구조만으로 화차물의 인화점을 대략적으로 예측하는 방법을 시도하고자 하였다.