• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.39-44
• /
• 2011

Automatic fire alarm system is set up to automatically detect fire on buildings. Because of economic reasons, P-type receiver and a conventional type fire detector is normally used for automatic fire alarm system in Korea. Because early detection of fire is regarded as important, the need of finding technique of fire location increases. This paper is studied a method to improve a reliability and add a function of fire location detection on a conventional type fire detector and P-type receiver. Fire location is detected by a method that controller attached on the receiver and the detector is read with a time lag. A reliability of fire detection alarm system is improved with a method that false fire alarm is able to decrease using two different principle detector together. This paper is studied for basic data of improvement of low-cost addressable automatic fire alarm system.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.97-102
• /
• 2021

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performance-centered design.

• 대한안전경영과학회지
• /
• 제18권1호
• /
• pp.65-73
• /
• 2016

In this paper which was performed to bring public attention to the need for developing an photoelectric smoke detector that detects smokes emitted from diverse fire sources, it was confirmed that the photoelectric smoke detector may not respond to certain smoke types depending on the size and color of smoke particles. The test was performed on a photoelectric smoke detector which is being used generally for specific fire targets specified in UL268, including paper fire, wood fire and flammable liquid fire, while the actual response performance of the fire detector, as well as respective smoke particles collected from different fire source which were photographed with a SEM(Scanning electron microscope) were analyzed in the test for this study.

• 한국화재소방학회논문지
• /
• 제24권1호
• /
• pp.111-115
• /
• 2010

본 논문은 단독형 화재감지기에 무선통신기능을 융합한 화재감지장치를 개발하고자 ZigBee 통신기술을 단독형화재감지기의 신호처리방식으로 채택하여 무선 네트워크와 결합이 가능하도록 설계하였다. 화재감지시 출력전압은 0.4V, 동작 펄스폭은 $600{\mu}s$로 실험하였다. LED감시등은 30초 주기로 동작하고 0.12mA, 동작시에는 0.5초 주기로 하며 사용전류가 7mA가 흐르도록 하여 전원회로, Chamber테스트, 연기테스트, IRED, LED 점등등 각 부분이 일정 시간 내에 정상적으로 동작되어 그 적정성을 확인하였다.

• 한국화재소방학회논문지
• /
• 제34권3호
• /
• pp.35-42
• /
• 2020

성능위주 소방설계(PBD)의 안전성 평가 과정에서 화재모델링의 신뢰성 확보를 위해서는 화재감지기 작동시간의 정확한 예측성능이 요구된다. 본 연구는 대표적 화재모델인 FDS에 적용되는 정온식 열감지기의 주요 입력인자인 감지기 작동온도와 RTI의 측정을 목표로 한다. 이를 위해 화재감지기 실험 장치인 Fire detector evaluator (FDE)가 적용되었으며, 제품 인지도 조사를 통해 선정된 국내 10종의 정온식 감지기가 고려되었다. 결과적으로 감지기의 제조사별로 작동온도와 RTI는 상당한 차이가 있는 것으로 확인되었으며, 측정된 DB가 적용된 FDS의 감지기 작동시간은 보다 정확한 예측이 가능함을 확인하였다. 최종적으로 신뢰성이 확보된 정온식 열감지기의 작동온도와 RTI의 DB가 제공되었다.

• 조명전기설비학회논문지
• /
• 제27권5호
• /
• pp.89-94
• /
• 2013

The fire testing performed for smoke detector model approval in Korea tests only one kind of fire smoke. A photoelectric spot-type smoke detector using Mie scattering is affected by the wavelength of light beam and the particle diameter. According to UL (Underwriters Laboratories Inc.) 268 standard, this paper analyze the characteristic of the response for a photoelectric spot-type smoke detector on sale in Korea using various fire smokes. Probability that the response time is included in non-defective range is 100% in paper fire, 90% in wood fire and 75% in flammable liquid fire, 90% in wood fire and 75% in flammable liquid fire. According to the estimation for population mean of the response time choosing a confidence level of 99%, a maximum of 19% for wood fire and that of 38% for flammable liquid fire are defective. As the result of analysis of smoke particle, this paper is found that these results are caused by the smoke particles are wide variations in size or have very black.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.46-51
• /
• 2017

This paper presents classification of domestic fire detector using response time index. Response time is measured using fire detector distributed in Korea, and the response time index is estimated. Plunge test prescribed by FM is conducted to measure response time of fire detector. The detector used to test is fixed temperature type(thermistor and bimetal type) and rate of rise temperature type(thermistor and pneumatic type). The nominal operation temperature of fixed temperature type detector is $70^{\circ}C$ and rate of rise temperature is $15^{\circ}C/min$. The fixed temperature type is measured 7 products, and the rate of rise temperature type is measured 5 products. The results show that in case of fixed temperature type(thermistor) is classified "Quick" or "Standard" and fixed temperature type(bimetal) is not classified. The rate of rise temperature type(thermistor) is classified "Fast" or "Ultra Fast" and the rate of rise temperature type(pneumatic) is classified "Very Fast" or "Ultra Fast". The pneumatic type shows more fast response than thermistor type. Also these results indicate the fixed temperature type(bimetal) is not suitable for early stage fire detection.

• 한국화재소방학회논문지
• /
• 제32권5호
• /
• pp.40-45
• /
• 2018

이 논문은 천장형 에어컨의 기류가 화재감지기 작동에 미치는 영향을 분석한 연구이다. 천장형 에어컨의 기류를 형성시킨 가운데 화재감지기의 작동특성을 분석하기 위하여 ISO표준에서 규정한 방법으로 화재실험을 수행하였다. 실험은 10 m (가로) ${\times}$ 7 m (세로) ${\times}$ 4 m (높이) 크기의 화재실험장에서 수행하였다. 실험에 사용된 화재감지기는아날로그식 열감지기와 아날로그 연기감지기이다. 화원으로는 열감지기 작동을 위해 n-heptane을 사용하였고, 연기 감지기 작동을 위해 면심지(Cotton)를 사용하였다. 실험 결과, 화재감지기의 응답은 기류가 없을 때는 화원으로부터 거리가 멀어질수록 늦어지는 패턴을 보이나, 강한 기류에서는 그 패턴이 유지되지 못한 것을 확인하였다. 천장형 에어컨 기류가 없는 경우에 비해 기류가 강한 경우에 응답시간이 연기감지기는 121%, 열감지기는 39% 늦어졌다. 천장형 에어컨이 설치된 장소에서는 화재감지기 개수를 늘려 풍구 4방향에 모두 설치하거나 감도가 뛰어난 감지기를 설치하는 것이 화재의 조기감지를 위해 필요할 것으로 판단된다.

• 방재기술
• /
• 통권28호
• /
• pp.48-54
• /
• 2000

The technique detects radiant energy form a flaming fire of fuels contained carbonaceous material can be applied to fast growing fires. This technique applied detectors are ultimately effective when early detecting fire alarm system is required or the smoke and heat detectors can not applied. In Korea Fire regulation, a flame detector should be install in case that the installation height is higher than 20[m], chemical plant, hangar refinery. Therefore it is really necessary that a flame detector has to be developed as soon as possible. With foundation technique of flame detector, ideal sensing element and stable circuit design, a trial UV flame detector is manufactured. The stable and reliable technique of flame detector is established through the repeateed perfomance test and modification. An early detecting fire alarm device is developed through the modification, supplement of the structure and circuit. Results of the R & D for the manufacture of an excellent flame detecting device is carried out with the establishment of technique for the mass production and the qualified manufacturing process.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.135-143
• /
• 2008

Recently as the testing of fire detector used the testing device for fire detector, there are something the matter in the perception function loss of fire detector, structure and form of the testing device for fire detector. The problem at oxidation of emitting smoke ashes hazardous article part and so on that checking person absorbs be. In this paper the problem or the conventional the examination equipment of fire detectors is analysed and researched. To solve these problems after the theoretical study and design and paint drawing of equipment the prototype of composite examination equipment of fire detectors was made. After compared with the conventional, part that improve of composite examination equipment of fire detectors are verified through the examination. In the future it will be useful the operation state and correct operation time of the fire detectors are measured after the research about the quality of the material and transparency of bellows cover is done.