• Computers and Concrete
• /
• 제14권2호
• /
• pp.127-143
• /
• 2014

LOCA (Loss Of Coolant Accident) is one of the most important utmost accidents for Prestressed Concrete Containment Vessel (PCCV) due to its coupled effect of high temperature and inner pressure. In this paper, heat conduction analysis is used to obtain the LOCA temperature distribution of PCCV. Then the elastic internal force of PCCV under LOCA temperature is analyzed by using both simplified theoretical method and FEM (finite element methods) method. Considering the coupled effect of LOCA temperature, a nonlinear elasto-plasitic analysis is conducted for PCCV under utmost internal pressure considering three failure criteria. Results show that the LOCA temperature distribution is strongly nonlinear along the shell thickness at the early time; the moment result of simplified analysis is well coincident with the one of numerical analysis at weak constraint area; while in the strong constrained area, the value of moments and membrane forces fluctuate dramatically; the simplified and numerical analysis both show that the maximum moment occurs at 6hrs after LOCA.; the strain of PCCV under LOCA temperature is larger than the one of no temperature under elasto-plastic analysis; the LOCA temperature of 6hrs has the greatest influence on the ultimate bearing capacity with 8.43% decrease for failure criteria 1 and 2.65% decrease for failure criteria 3.

• 한국터널지하공간학회 논문집
• /
• 제15권6호
• /
• pp.547-557
• /
• 2013

전단응력에 의한 전단강도 및 모드 II 파괴인성은 이산화탄소 지중저장에서의 덮개암 및 주입층의 안정성 평가에 활용되는 중요한 인자들이다. 본 연구에서는 짧은 보 압축시험을 이용하여 코코니노 사암의 전단강도 및 모드 II 파괴인성을 측정하였다. 측정된 평균 전단강도는 23.53 MPa이며, 모드 II 파괴인성은 1.58 MPa${\surd}$m이다. 응력확대계수(stress intensity factor)는 변위외삽법(displacement extrapolation method)을 이용한 유한요소법으로 결정하였다. 또한 이축응력(biaxial stress)과 수분포화(water saturation)가 모드 II 파괴인성에 미치는 영향을 분석하였다. 그 결과 이축응력이 증가할수록 파괴인성도 증가하였고, 완전포화된 시험편의 파괴인성은 건조상태의 파괴인성보다 대략 11.4% 감소하였다.

• Structural Engineering and Mechanics
• /
• 제13권6호
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• 천문학논총
• /
• 제23권1호
• /
• pp.1-12
• /
• 2008

Understanding of the basic characteristics of an astronomical instrument is a prerequisite to obtaining reliable data from the instrument. We have analyzed more than 1,000 calibration images from the Fairchild 486 CCD (hereafter the Maidanak 4k CCD system) attached to the AZT-22 1.5m telescope at Maidanak Astronomical Observatory in Uzbekistan. The Maidanak 4k CCD system supports three readout modes through 1, 2, or 4 amplifiers. In most cases observers use 4-amplifier readout mode to save time. We have tested the stability and seasonal variation of zero levels and confirm that two quadrants of the images (Amp 1 & 2) show no appreciable seasonal variation. but the other two quadrants (Amp 3 & Amp 4) show an evident seasonal variation in the bias level. The Cryo Tiger, the cooling system used at the Maidanak 4k CCD system, maintains the CCD temperature at -108'E, and effectively suppresses the dark electrons. The mean value versus the variance plot of the flat images does not show the expected relation for an ideal Poisson noise distribution and this is attributed to the large variation in quantum efficiency between different pixels. In addition, we confirm that there is no appreciable difference in gain between readout amplifiers, but there is a large variation in quantum efficiency across CCD chip especially in U. Due to the finite length of shutter opening and closing time, the effective exposure time varies across the science images. We introduce two parameters to quantify the effect of this uneven illumination and present a method to remove these effects. We also present a method to remove the interference patterns appearing in the images obtained with longer wavelength filters and investigate the spatial variation of the point spread function.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.253-265
• /
• 1993

본 연구는 Lade에 의해서 제안된 비선형구성모델을 이용하여 지반거동을 해석하기 위한 수치해석 방법을 제시하고자 한것이다. 그 첫 시도로서 축대칭조건과 평면변형율조건의 비선형 경계치 문제를 해석하기 위하여 변위법을 이용한 유한요소 프로그램을 개발하였다. 모델의 매개변수를 결정하기 위한 시험과 모형기초지반의 시험재료는 백마강모래를 사용하였다. 그리고 실내시험 자료로 부터 비선형구성모델 의 매개변수를 결정할 때 컴퓨터 프로그램을 개발하여 사용하였다. 구성 모델의 정도를 검증하기 위하여 개발된 유한요소프로그램을 사용한 예측결과를 매개변수 결정에 사용된 실험 결과뿐만 아니라 결정에 사용되지 아니한 실험결과와도 비교하였다. 검증에 사용된 시험은 다음과 같다 ; (1) 등방압축팽창시험, (2) 구속압력을 달리한 배수삼축압축시험 (3) 모형기초지반의 재하시험, 이상의 시험과 수치해석결과를 비교하여 비선형구성모델과 유한요소해석프로그램의 정도를 확인하고 평면변형율조건에 있는 2차원모형기초지반의 거동 특성을 검토하였다.

• 한국추진공학회지
• /
• 제14권5호
• /
• pp.32-44
• /
• 2010

고체 추진기관 노즐의 2차원 열반응 및 삭마 해석 코드를 활용하여 노즐 부품의 숯 및 삭마현상을 연구하였다. Arrhenius 식을 이용한 내부 열분해 모델 상수는 TGA(열중량분석기) 실험으로 얻었다. 탄소와 $H_2O$, $CO_2$의 산화반응에 의한 화학적 삭마는 Zvyagin이 제안한 삭마모델 과 반응속도 상수를 이용하여 해석을 수행하였다. 삭마에 의한 경계조건 및 격자 이동은 상용해석 프로그램인 MSC-Marc-ATAS에서 적용되는 Rezoning-remeshing 기법을 사용하였다. 해석된 숯 및 삭마 두께는 연소시험 결과 값과 최대 20% 오차를 보였다. 향후 열방호 시스템의 성능을 모사하기 위하여 내부 온도 및 열유속을 실시간 측정하면 3차원 FEM 통합 열구조 해석에 적용될 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제9권5호
• /
• pp.449-467
• /
• 2000

The natural frequencies and the corresponding mode shapes of a non-uniform beam carrying multiple point masses are determined by using the analytical-and-numerical-combined method. To confirm the reliability of the last approach, all the presented results are compared with those obtained from the existing literature or the conventional finite element method and close agreement is achieved. For a "uniform" beam, the natural frequencies and mode shapes of the "clamped-hinged" beam are exactly equal to those of the "hinged-clamped" beam so that one eigenvalue equation is available for two boundary conditions, but this is not true for a "non-uniform" beam. To improve this drawback, a simple transformation function ${\varphi}({\xi})=(e+{\xi}{\alpha})^2$ is presented. Where ${\xi}=x/L$ is the ratio of the axial coordinate x to the beam length L, ${\alpha}$ is a taper constant for the non-uniform beam, e=1.0 for "positive" taper and e=1.0+$|{\alpha}|$ for "negative" taper (where $|{\alpha}|$ is the absolute value of ${\alpha}$). Based on the last function, the eigenvalue equation for a non-uniform beam with "positive" taper (with increasingly varying stiffness) is also available for that with "negative" taper (with decreasingly varying stiffness) so that half of the effort may be saved. For the purpose of comparison, the eigenvalue equations for a positively-tapered beam with five types of boundary conditions are derived. Besides, a general expression for the "normal" mode shapes of the non-uniform beam is also presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.116-131
• /
• 2013

The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE) model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI) method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council's (NRC) ice tank, are used to validate and benchmark the numerical simulations. The designed ice-going cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60%) of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship's hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.

• 한국농공학회지
• /
• 제24권3호
• /
• pp.73-83
• /
• 1982

study aims to derive a rational method for the analysis of the farm silo supported on an elastic foundation in which it is assumed that the reaction pressure of the soil at a point is proportional to the deflection at that point. In order to investigate the effects of an elastic foundation on the behaviour of the structures on it, the analysis of the farm silo resting on an elastic foundation was compared with the solution that the ground support may be assumed uniform (which was obtained from part I of this paper). To calculate the deformation of an elastic foundation, Boussinesq's solution which allows an interaction of the various parts of ground was adopted. In this case, the foundation was treated as a superparametric element additionally. In the evaluation of an element stiffness matrix, Gauss quadrature' was used. In above numerical integration, 3-point rule for the farm silo wall and the footing was introduced and 2-point rule for the evaluation of a reaction between the footing and the elastic foundation was adopted. The stresses of a farm silo on an elastic foundation were smaller than those which the distribution of contact pressure between the footing and the soil is assumed uniformly. Since the differences of stresses were remarkable in PS structures than RC structures, it is desirable that designers take into account the effect of an elastic foundation for the case of PS structures. It can be noted that while the effect of an elastic foundation was more conspicuously observed in near of the ground, the value of stresses at far from the soil was little affected by an supported soil.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.125-133
• /
• 2018

We report an in-depth analysis of the design and fabrication of multilayer dielectric (MLD) diffraction gratings for spectral beam combining at a wavelength of 1055 nm. The design involves a near-Littrow grating and a modal analysis for high diffraction efficiency. A range of wavelengths, grating periods, and angles of incidence were examined for the near-Littrow grating, for the $0^{th}$ and $-1^{st}$ diffraction orders only. A modal method was then used to investigate the effect of the duty cycle on the effective indices of the grating modes, and the depth of the grating was determined for only the $-1^{st}$-order diffraction. The design parameters of the grating and the matching layer thickness between grating and MLD reflector were refined for high diffraction efficiency, using the finite-difference time-domain (FDTD) method. A high reflector was deposited by electron-beam evaporation, and a grating structure was fabricated by photolithography and reactive-ion etching. The diffraction efficiency and laser-induced damage threshold of the fabricated MLD diffraction gratings were measured, and the diffraction efficiency was compared with the design's value.