• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.23-31
• /
• 1995

Changes of the properties of waterproof and moisture-permeable nylon fabric were investigated when softener, anti-static agents, anti-biosis agents were added to the polyurethane resin solution, and when they were applied after resin coating. The adding method of finishing agents into polyurethane layer resulted in an increase in water permeability but a severe decrease in peeling strength. It was found that the desired functionality such as softness, anti-staticity, anti-biosis were successfully introduced into waterproof and moisture-permeable nylon fabric by after-treatment of finishing agents.

• Journal of Conservation Science
• /
• v.19
• /
• pp.43-56
• /
• 2006

We checked the conditions and material properties after producing the lime finishing layers with a mortar mix of processed lime. In addition, we reproduced the lime finishing layers of the Koguryo Tomb Murals, colored the layers with a few different techniques and identified the characteristics for each painting technique. As a result of the experiment, we could infer the producing techniques as well as teaming the conditions and properties of the lime finishing layers of the Koguryo tomb murals, and examined the maintenance of the lime finishing layers. Of those samples produced under various conditions, the layers of slaked lime, which were obtained after being hydrated underground for a long time, showed quite a good condition. Thus the slaked lime mixes produced through particular hydration methods are judged to increase the maintenance of the lime finishing layers of the Koguryo Tomb Murals. Mostly, the paints of Koguryo Tomb Murals indicated that they have similar conditions with the samples produced with a secco method. In addition, Considering the compositional forms of the painting layers and the boundary layers which formed between the painting layers and the finishing layers, we can verify that, in some cases, the conditions of the painting layers of the Koguryo tomb murals are similar to those which were produced with a combination of fresco and secco.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.60-73
• /
• 2023

The need for adopting automation technologies to improve inefficiencies in interior finishing modeling work is increasing during the Building Information Modeling (BIM) design stage. As a result, the use of visual programming languages (VPL) for practical applications is growing. However, undefined or incorrect space designations in BIM models can hinder the development of automated finishing modeling processes, resulting in erroneous corrections and rework. To address this challenge, this study first developed a rule-based automated interior finishing detailing module for floors, walls, and ceilings. In addition, an automated space integrity checking module with 86.69% ACC using the Multi-Layer Perceptron (MLP) model was developed. These modules were integrated into a design automation module for interior finishing, which was then verified for practical utility. The results showed that the automation module reduced the time required for modeling and integrity checking by 97.6% compared to manual work, confirming its utility in assisting BIM model development for interior finishing works.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.83-86
• /
• 1997

Even as many methods and technologies have been introduced on data generation, parts orientation and layer slicing to acquire the rapid prototyping(RP) parts that have useful surface to satisfy customers' needs such as stylingldesign verification directionlindirect tooling directly from the RP machine, these trials continue to suffer from the surface roughness due to the build characteristics of RP technology. A new postprocess finishing method is suggested in this paper to overcome the surface roughness problem on the surface of the RP parts. To prevent deterioration of dimensional accuracy from the conventional grinding-only, and coating-grinding methods, 4-step surface finishing process is applied. To satisfy the various requirements from the RP oriented industrial f elds, effective procedure, coating material, grmd~ng tools and methods are employed.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.314-326
• /
• 2022

Investigation of conservation status, optical survey, infrared thermography, and ultrasonic examination were performed on Avalokitesvara Bodhisattva mural and Buddhist Monk Bodhidharma mural to determine the conservation status and physical properties. As a result of investigation of conservation status, the types of damage are largely divided into the wall and finishing layer damage, painting layer degradation, damage due to restoration materials, stains and contamination, and biological damage. As a result of the optical survey, drawing, stains, and repainted site were confirmed. Result of the infrared thermography, the delamination of the finishing layer was confirmed, and some locations and shapes of the wooden lath inside the wall were identified. The result of the 3D scanning, the deviation, and the separation of the wall was confirmed. As a result of ultrasonic examination, it was confirmed that the physical properties of the mural were identified and the ultrasonic speed was relatively low due to physical damage such as delamination and exfoliation of the finishing layer and cracking. Ultrasonic speed values were also high in some wall cracks or delamination, and it was confirmed by the infrared thermography results that the wooden lath inside the wall was located in those parts. It was possible to understand that the wooden lath inside the walls affects the ultrasonic speed during the ultrasonic examination. Therefore, management through periodic inspection of the relevant elements is necessary, and a countermeasure for damage that may occur in the future should be prepared along with intensive monitoring of the major damage identified in this diagnosis result.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2006

A multi-layer of the dye, natural colorant Berberine, was successfully developed by the self-assembly deposition from water-soluble cationic dye(Berberine chloride) and anionic polyelectrolyte PSS(Polysodium 4-styrenesulfonate) in aqueous solution via electrostatic attraction. The corresponding results on multi-layer were characterized by UV-Vis absorbance measurements. The growth of multi-layer formed by the sequential interaction was also determined. The findings measured by UV-Vis spectrophotometer showed that the bilayer deposition characteristic was linear and highly reproducible from layer to layer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.83-92
• /
• 2011

A inorganic powder EL lamp was made by screen printing technique with phosphor ink and dielectric ink. The thickness change of a phosphor ink layer and a dielectric ink layer were not influenced on dielectric content, but rely on phosphor size and vehicle. Once finishing screen printing technique with phosphor ink and dielectric ink, and its surface has been printed again before not drying of phosphor ink and dielectric ink. Then phosphor ink and dielectric ink were not transferred. The electric capacity of inorganic powder EL lamp was more influenced on dielectric content than the thickness of dielectric ink layer, and it was more dependent on the thickness of phosphor ink layer than the thickness of dielectric ink layer.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.59-67
• /
• 2013

This paper presents a neural net type process model for enhancing learning compensation function in hot strip finishing rolling mill. Adequate input and output variables of process model are chosen, the proposed model was designed as single layer neural net. Equivalent carbon content, strip thickness and rolling speed are suggested as input variables, and looper's manipulation variable is proposed as output variable. According to simulation result using process data to show the validity of the proposed process model, neural net type process model's outputs give almost similar data to process output under same input conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.481-486
• /
• 2010

ENIG (electroless Ni immersion gold) is one of surface finishing which has been most widely used in fine pitch SMT (surface mount technology) and BGA (ball grid array) packaging process. The reliability for package bondability is mainly affected by interfacial reaction between solder and surface finishing. Since the behavior of IMC (intermetallic compound), or the interfacial reaction between Ni and solder, affects to some product reliabilities such as solderability and bondability, understanding behavior of IMC should be important issue. Thus, we studied the properties of ENIG with P contents (9 wt% and 13 wt%), where the P contents is one of main factors in formation of IMC layer. The effect of P content was discussed using the results obtained from FE-SEM(field-emission scanning electron microscope), EPMA(electron probe micro analyzer), EDS(energy dispersive spectroscopy) and Dual-FIB(focused ion beam). Especially, we observed needle type irregular IMC layer with decreasing Ni contents under high P contents (13 wt%). Also, we found how IMC layer affects to bondability with forming continuous Kirkendall voids and thick P-rich layer.