• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.79-84
• /
• 2006

In modem manufacturing, many products that have geometrically complicated features, including three-dimensional sculptured surfaces, are designed and produced. In the production of these complex-shaped mechanical components, e.g. automobile dies, molds, and various engineering applications, the ball-end milling process is one of the most widely used NC machining processes that consists of roughing, semi-finishing and finishing. In semi-finishing, cusps remained after roughing according to the used tools that have two patterns of stairs and wave shapes. These cusp shapes have air-cut in cutting and instability caused by high cutting speed that affects the cutting characteristics such as cutting force and tool wear. Cutting characteristics are measured and analyzed through cutting force, FFT analysis of cutting force and tool wear along cutting length according to low tool paths with same metal removal rate. As a results of the experiments, this study suggests the optimal conditions of tool path and cutting direction. This approach for the cutting characteristics of semi-finishing provides a useful aid for the productivity and efficiency improvements of NC machining processes.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권6호
• /
• pp.859-863
• /
• 2018

Objective: Since very little information exists about the topic; in this experiment we compare, in a long-term finishing program, the growth-performance responses and carcass characteristics of Holstein steers where non-structural carbohydrate concentration of the diet is reduced from 64% to 51% (dry matter basis). Methods: Sixty Holstein steer calves ($129{\pm}2.2kg$) were blocked by initial weight into five groups and randomly assigned within weight groupings to 10 pens. Calves were fed with a steam-flaked corn-based finishing diets containing 51% higher fiber (HF) or 64% lower fiber (LF) nonstructural carbohydrates. Non-structural carbohydrates concentrations were manipulated substituting dried distiller grain with solubles and alfalfa hay for flaked corn. Cattle were weighed every 112 days and at the end of the experiment (day 308) when the cattle were harvested and carcass characteristics were evaluated. Results: Steers fed the HF diet showed improvement (8.8%) in average daily gain (ADG) during the initial 112-d period. This effect was followed by a numerical trend for greater ADG throughout the remainder of the study so that overall ADG tended to be greater (4.9%, p = 0.06) for the HF than for LF. There were no treatment effects on dry matter intake. Gain efficiency and estimated dietary net energy (NE) were greater 8.3% and 5.2%, respectively for HF during the initial 112-d period. Overall (308-d) gain efficiency and estimated dietary NE were similar for both dietary treatments. However, due to differences in tabular dietary NE, the ratio of observed:expected dietary NE tended to be greater (4.1%, p = 0.06) for the HF vs LF diet. There were no treatment effects on carcass characteristics except for a tendency toward a slightly greater (0.5%, p = 0.09) estimated carcass yield. Conclusion: Reducing the non-structural carbohydrate concentration of a conventional steam-flaked corn-based growing finishing diet for Holstein steers can effectively enhance growth performance, particularly during the early growing and late finishing phases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권11호
• /
• pp.1563-1567
• /
• 2017

Objective: The influence of substituting steam-flaked corn (SFC) for dry rolled corn (DRC) on feedlot cattle growth performance and dietary net energy when cattle are allowed either ad libitum or 2-h restricted access to the finishing diet was evaluated. Methods: Treatment effects were tested using 96 crossbred steers ($251{\pm}2kg$) during the initial 56 d of the finishing phase. Cattle were blocked by weight and randomly assigned within blocks to 16 pens (4 pens/treatment). Bunk space was sufficient (41 cm/head) to allow all steers access to the feed bunk at the same time. Treatments consisted of two finishing diets containing (dry matter basis) 77.1% corn grain processed by dry rolling (density = 0.50 kg/L) or steam flaking (density = 0.36 kg/L). Cattle were fed twice daily at 06:00 and 14:00 h, allowing for approximately 5% residual. In the case of restricted feeding, steers were allowed access to feeders for 1 h following each feeding, after which residual feed was withdrawn. Results: There were no treatment interactions on dry matter intake (DMI), average daily gain (ADG), gain efficiency (G:F), or dietary net energy (NE). Restricting feed access time reduced (p<0.01) feed intake, and hence, ADG. Substitution of SFC for DRC increased (p<0.01) ADG, feed efficiency (G:F), and estimated dietary NE, without affecting DMI. Based on tabular net energy of maintenance ($NE_m$) value (2.18 Mcal/kg) for DRC, the estimated $NE_m$ value for SFC using the replacement technique, averaged 2.44 Mcal/kg; an improvement of 10.7%. The ratio of observed-to-expected dietary NE was not affected by feed access time. Conclusion: Substitution of SFC for DRC in finishing diets for feedlot cattle enhanced ADG, gain efficiency, and the NE value of the diet. Although restriction of feed access time depressed DMI and ADG, it did not affect the comparative benefit of steam flaking toward enhancement of ADG, G:F, and dietary NE.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.129-132
• /
• 2007

From this research the construction civil official is simple with the parking floor finishing material, it improves the durability of the parking floor it uses the flexible FRP it will be able to secure the drainage quality it is excellent and it presents the efficient application plan from the construction site. The performance appraisal only efficiency with of result floor of parking area material bay it knows, the result where also the performance appraisal portion re-with roof bottom finishing is satisfied it showed. The flexible FRP it applies the material to the building as to diminish the damage of the bottom finishing material due to the deterioration and the conduct and the external force of the building it is exposed to the external environment, secures the quality of the material from the construction site and will contribute to the stability against the bottom finishing material.

• 한국실내디자인학회논문집
• /
• 제15권3호
• /
• pp.24-32
• /
• 2006

Through the increasing of social economies and cultural activities, the Food service industry have been growing up steadily in spite of low economic activity. This is owing to increasing income, participation of women in public affairs and a dual-income family, automobile culture, desire for healthful food, shorten working hours, changing of cultural style. Moreover, the recent importance of Interior finishing materials by means of fire in the Restaurant, legal fractional multiple use business establishment are recognized of publicity. Therefore, This Study aim object at probing into the characteristic of Interior finishing material and then analysing the characteristics of space and material according to the typical distribution. In the Interior planning of Restaurant, firstly it is need to probe the Characteristics of interior finishing material at the basic element. This study is going to apprehend the constitution of space and difference of proportion or a point of sameness in the characteristics of material. Moreover, the recent importance of Interior finishing materials by means of fire in the Restaurant, legal fractional multiple use business establishment are recognized of publicity. Throughout probe and analysing, it can append more efficiency and elasticity in the usage of interior finishing material.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.220-224
• /
• 2008

The need for refining dietary nutrient levels and limited information regarding Holstein steer and phosphorus supplementation led to the objective of examining the response of removing supplemental dietary phosphorus from a corn-based finishing diet offered to yearling Holstein steers. Two groups of yearling Holstein steers were utilized to study responses of increasing dietary phosphorus level during the finishing period. In Exp. 1, 96 Holstein steers (419 kg) were blocked into four weight groups. Dietary treatments included no additional phosphorus (NDC) or the inclusion of dicalcium phosphate (DCP) to achieve 0.30% phosphorus (P) in the complete diet. Daily gain, DMI and carcass traits were not different (p>0.05). Overall gain efficiency was slightly lower for NDC (p<0.05). Exp. 2 consisted of 78 Holstein steers (491 kg) blocked into two weight groups. Steers were harvested on d 84 and 112 d on test with carcass data collected following a 48-h chill. No differences (p>0.05) were detected for DMI, ADG, or gain efficiency. No differences (p>0.05) were detected in carcass characteristics in this experiment. Percent bone ash, calcium, P, and bending moment also did not differ among treatments (p>0.05). Removing supplemental phosphorus in the feedlot diet did not produce adverse effects on steer performance, carcass, or rib bone characteristics for yearling Holstein steers.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.26-33
• /
• 1998

Acoustical properties of chestnut and paulownia woods have been determined in four film thicknesses of oriental lacquering and cashew varnishing on double surfaces of soundboard to elucidate effects of finishing. Accelerometer was attached to the specimen at one third position from one end, and specimen was hit by the impact hammer at one third position from opposite end. Data were processed by vibration analyzer. The ratio of axial-to-transverse sound velocity of untreated specimens of chestnut and paulownia were 3.25 and 5.34, respectively. Natural frequency, specific Young's modulus, acoustical coefficient, sound velocity, damping of sound radiation(DSR) and acoustical converting efficiency(ACE) decreased by oriental lacquering and cashew varnishing for both species. Damping of internal friction of chestnut decreased by oriental lacquering and cashew varnishing, but that of paulownia increased. Natural frequency. specific Young's modulus, acoustical coefficient, sound velocity, and DSR decreased with increased film thickness of both finishing materials. However, damping of internal friction and ACE showed irregular tendency with increased film thickness. Acoustical properties of cashew varnished chestnut specimen were better than those of oriental lacquered specimen. Acoustical properties of oriental lacquered paulownia specimen were better than those of cashew varnished specimen.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권7호
• /
• pp.968-978
• /
• 2003

The effects of monensin, Tween 80 and exogenous fibrolytic enzymes on ruminal fermentation and animal performance were studied in vitro and in vivo. In Expt 1, the effects of the surfactant Tween 80 (0.2% wt/wt, DM basis) on ruminal fermentation of alfalfa, corn and orchardgrass silages were investigated using in vitro gas production techniques. Tween 80 did not affect (p>0.05) cumulative gas production at 24 h, but it reduced (p<0.05) the lag in fermentation of all three silages. With corn silage and orchardgrass silage, gas production rates and concentrations of total volatile fatty acids (VFA) were increased (p<0.05) by Tween 80; with alfalfa silage, they were reduced (p<0.05). Tween 80 increased (p<0.05) the proportion of propionate in total VFA, and reduced (p<0.05) acetate to propionate ratios (A:P) with all three silages. In Expt 2, exogenous fibrolytic enzymes (E; at 0, 37.5 or 75 g/tonne DM), monensin (M; at 0 or 25 ppm and Tween 80 (T; at 0 or 2 L/tonne DM) were added alone or in combination to backgrounding and finishing diets fed to 320 crossbred steers in a feeding trial with a $3{\times}2{\times}$2 factorial arrangement of treatments. The backgrounding and finishing diets contained barley grain and barley silage in ratios of 57.8:42.2 and 93.5:6.5 (DM basis), respectively. Added alone, none of the additives affected DM intake (p>0.1) in the backgrounding or in the finishing period, but interactive $M{\times}T$ effects were observed in the finishing period (p=0.02) and overall (p=0.04). In the finishing period, T without M tended to reduce DM intake (p=0.11), but T with M increased (p=0.05) DM intake. Monensin increased average daily gain (ADG) during backgrounding (p=0.07) and finishing (p=0.01), and this ionophore also improved overall feed efficiency (p=0.02). Warm carcass weight was increased (p<0.001) by M, but dressing percentage was reduced (p=0.07). In the backgrounding period, T increased ADG by 7% (p=0.06). Enzymes increased (p=0.07) ADG by 5 and 6% (low and high application rates, respectively) during backgrounding, but did not affect (p>0.10) ADG during finishing, or overall feed efficiency. Whereas T enhanced the positive effects of M on ADG during backgrounding (p=0.04) and overall (p=0.05), it had no impact (p>0.1) on the effects of E. Interactions between M and T suggest that the surfactant may have potential for enhancing the positive effects of monensin on beef production, but this requires further research.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권9호
• /
• pp.1213-1220
• /
• 2010

This experiment evaluated the effects of dietary lysine restriction and energy density on growth performance, nutrient digestibility and meat quality of finishing pigs. A $2{\times}2$ factorial arrangement of treatments was utilized in a randomized complete block (RCB) design, and factor 1 was lysine restriction and factor 2 was energy density. The control diet was formulated to contain 3.265 Mcal of ME/kg, 0.75% lysine in the early-finishing phase and 3.265 Mcal of ME/kg, 0.60% lysine in the late-finishing phase and other nutrients met or exceeded NRC (1998) standards. Compared to the control diet (CON), lysine levels of experimental diets were restricted to 15% (treatment EL, EEL) or 30% (treatment ELL, EELL), whereas energy level of experimental diets was increased by 0.100 or 0.200 Mcal of ME/kg. A total of 100 crossbred pigs ([Yorkshire${\times}$Landrace]${\times}$Duroc), with average initial body weight of $58.47{\pm}1.42\;kg$, were allotted to 5 dietary treatments based on sex and body weight. Each treatment had 5 replicates with 4 pigs (two barrows and two gilts) per pen. ADG, ADFI and feed efficiency were calculated in an 8-week growth trial. In the late finishing period (5-8 weeks), pigs fed ELL or EELL diets had decreased ADG and feed efficiency (p<0.01), however, when the EEL diet was provided, a similar growth performance was observed compared to those fed the CON diet during the whole experimental period (p>0.05). In a metabolic trial, 15 pigs were used to evaluate the effect of dietary lysine restriction and energy density on nutrient digestibility. The digestibility of dry matter, crude fat and crude ash was not improved by restricting dietary lysine or energy density. However, crude protein digestibility was decreased (p<0.05) as dietary lysine was restricted. When dietary lysine was restricted, fecal nitrogen was increased whereas nitrogen retention was decreased. BUN concentration was affected by dietary lysine restriction; treatments ELL and EELL had higher BUN values than other treatments (p<0.01). Carcass characteristics and meat quality were measured when average body weight of pigs reached $107.83{\pm}1.50\;kg$. Treatment ELL had higher last rib backfat depth (p<0.05) than treatment CON, but ELL and EEL did not differ significantly. The ELL and EEL treatments had higher (p<0.05) subjective marbling score than treatment CON. Treatment EEL showed higher longissimus fat content than treatment EL and CON (p<0.01). The results indicated that finishing pigs fed a diet with 15% lysine restriction and 3.465 Mcal of ME/kg energy density had no detrimental effects on growth performance and N utilization, and could achieve substantial increases in marbling and longissimus fat content of pork.