• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• 한국염색가공학회지
• /
• 제13권4호
• /
• pp.272-281
• /
• 2001

Shrink resist finishing of wool fabric was carried out with MONAMIN BTN shrink resist agent after chlorination with D.C.C.A.(dichloro isocyanuric acid). The purpose of this study is to investigate the effect of treating conditions, such as concentrations of D.C.C.A and MONAMIN BTN, pH of treating bath, dying times, curing times and temperatures, on shrink resist finishing. Mechanical properties of the treated fabric were measured by KES-FB system. The optimum chlorination of wool corresponds to 2∼3%(o.w.f.) of D.C.C.A. without rendering the damage on surface of wool fiber. Also it seems likely that the shirink resist finishing carried out at 2 ∼3%(o.w.f.) of MONAMIN BTN and pH 7∼8 of treating bath is effective in increasing a softness of hand.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.258-268
• /
• 2021

This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.55-63
• /
• 1999

The purpose of this study was to investigate the purification of chitin and chitosan for textile finishing agent from crab shell. Weight loss rate(removing Ca and protein), degree of deacetylation, solubility and MIC(Minimum growth inhibitory concentration) value of chitosan and molecular weight of the treated crab shell were measured. The results of this study were as follows : 1) Weight loss rate(removing Ca) of crab shell treated with HCI increased with the concentration of HCI and treatment time, but it became constant over 60 min. of treatment time. 2) Weight loss rate(removing protein) of crab shell treated with NaOH(0.5N∼2N) increased with the concentration of NaOH and treatment temperature and time, but it became constant above loot of temperature and over 200 min. of treatment time. 3) Degree of deacetylation of chitin treated with NaOH increased with the concentration of NaOH(40∼60％), but molecular weight decreased and thus MIC value increased. 4) Concentration of acetic acid should be above 0.3％ to dissolve chitosan easily. Solubility for chitosan was the highest with formic acid, and the next was acetic acid, hydrochloric acid, lactic acid and sulfuric acid in order.

• 대한건축학회논문집:구조계
• /
• 제36권1호
• /
• pp.147-154
• /
• 2020

The exterior finishing of reinforced concrete buildings is one of the important factors to prevent durability and prevent natural environment or disaster such as temperature, snow, wind, rain from the outside as well as external design of buildings. Finishing methods can be divided into wet and dry methods. The wet method using paint is relatively easy to construct, but it requires repair and reinforcement every 1 to 5 years and requires a lot of LCC for maintenance. Finishing method using panel has good durability, but it is difficult to install and expensive. Therefore, in this paper, we evaluate the bond strength for the application of the metal spray method in order to overcome the problems of existing methods. Experimental results show that the sandblast + surface roughness agent(S-R(Y)) has a roughness of 41.16 ㎛ and the bond strength is about 3.19 MPa, which is the highest bond strength. In addition, the grinding + surface roughness agent(G-R(Y)) application showed roughness of about 36.59 ㎛ and secured the bond strength performance of 2.94 MPa.

• 대한가정학회지
• /
• 제42권8호
• /
• pp.113-121
• /
• 2004

This study used cupric sulfate as a bum-out agent. The concentration of cupric sulfate, temperature and time were varied with glycerin included or excluded on the properties of polyester ground fabrics. The results are as follows. The effect of carbonization with glycerin included was decreased, but removal of carbide with glycerin included was easier than that with glycerin excluded. The white index and tensile strength of polyester ground fabrics were decreased as the processing concentration, temperature and time increased. The shrinkage was increased as the processing concentration, temperature and time increased. The optimum conditions with cupric sulfate as the bum-out agent was 5％ concentration, 140$^{\circ}C$, 3min., and 3kgf/cm$^2$ and with cupric sulfate added to glycerin was 5％ concentration, 150$^{\circ}C$, 5min., and 3kgf/cm$^2$.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.47-54
• /
• 2003

To be dyed with cationic Berberine, the cotton fiber was modified with reactive anionic agent. The Berberine, a natural cationic colorant of pure yellow, is the major component of Amur Cork tree extract and also can be employed as a natural antimicrobial agent due to its characteristic of cationic quaternary ammonium salt. By LC/MS analysis, it became obvious that the Berberine was contained in Amur Cork tree extract as a major color component. The adsorption of the Berberine on the cotton fabrics pretreated with the anionic agent was greatly increased comparing to that of untreated fabric. Because the anionic agent was colorless, it did not cause unintended color change of the dyeings. The dyed fabric with the Berberine has strong antimicrobial activity showing 99.5% of reduction of bacteria against Staphylococcu aureus.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.96-102
• /
• 2007

Antibacterial finishing of nylon 66 fabrics was carried out with sericite and medilite which are a cheap price antibacterial agents and had excellent antibacterial effects. The particle size of sericite and medilite was 15 ${\mu}m$ and 30 ${\mu}m$. The antibacterial and deodorant ratio, tensile and tear strength, peel strength were examined to investigate the change of physical properties and antibacterial effect. The results are as follows. 1. Peel strength is increased with increasing adhesive content, and satisfied standard value of peel strength when adhesive content is 20 $g/m^2$. Also peel strength was decreased with increasing antibacterial agent content and particle size in the adhesives. 2. Tensile and tear strength were not related with antibacterial agent content in the adhesives. 3. Laundering nylon 66 fabric treated with antibacterial agent, the optimum content satisfying Korean Standard(KS) is 8%. The antibacterial and deodorant ratio were not affected by several types of adhesives.

• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.253-270
• /
• 2016

In the wool textile industry, the necessity for technology development has been steadily raised to create improved fineness and yarn count of existing wool yarns with thick fineness for ensuring higher quality grades of wool yarn. Recently, through controlling fineness of wool yarn for making finer wool in relation with environmentally-friendly and high-sensitivity trend, a differentiated continuous drawing process where the quality of wool can be artificially manipulated has been suggested in the latest textile industry. This study investigated the basic conditions during the continuous drawing process which enable to manufacture wool yarn with fine count by controlling reducing agent treatment, physical drawing and drying after reducing agent treatment, and oxidizing agent post-treatment conditions. Furthermore, this study reviewed the drawing effects by applying the basic conditions for reduction and oxidation reaction in the drawing processes of wool/cashmere, wool/silk, wool/polyester blended yarns as well as such wool yarns. Also, in order to review the practicability, this study examined the physical properties and dyeability of drawn wool yarn applied textile materials in comparison with normal wool yarn applied textile materials.