• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.1
• /
• pp.119-124
• /
• 2017

Objective: The death of animals during transport for slaughter is a major factor indicating the level of welfare in transported animals. The aim of this study was to assess mortality related to the commercial transport of finisher pigs for slaughter in the Czech Republic. Methods: The inspectors of the State Veterinary Administration of the Czech Republic recorded the numbers of finisher pigs transported to processing plants in the Czech Republic for slaughter and the mortality in these pigs in relation to transport in the period from 2009 to 2014. Results: Our results show that the likelihood of death losses in transported pigs increases with increasing transport distance. The transport-related mortality ranged from 0.049% in pigs transported for distances below 50 km to 0.145% in pigs transported for distances exceeding 300 km. The impact of external air temperature on the transport-related mortality found in our study clearly shows that current transport practices fail to ensure the welfare of pigs transported under other than moderate weather. Particularly cold temperatures below $-2^{\circ}C$ were associated with increased death losses in winter transport. Conclusion: Despite a decreasing trend in the mortality of finisher pigs transported for slaughter in Europe, our study suggests that current transport conditions are not efficient at ensuring the welfare of pigs during transport for longer distances and the protection of pigs against the negative impact of extreme ambient temperatures. Further research should focus on developing practical guidelines to improve the welfare of pigs in transit accordingly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1429-1432
• /
• 2000

Three groups of 7, 8 and 8 barrows (22 weeks age; 35 kg body weight), reared on grower diets were fed ad libitum on three isonitrogenous finisher diets containing 50, 71 and 92% wheat bran by replacing maize grain till the attainment of about 74 kg slaughter weight. Growth pattern, average daily gain, feed intake, feed/gain ratio and carcass traits were similar in all the groups. The digestibility of DM, OM, CF, NFE total carbohydrate and energy (DE) decreased (p<0.01) with the increased level of wheat bran in the diet. However, CP digestibility was comparable among all the diet and the digestibility of EE was significantly (p<0.01) higher in grainless diet ($FD_3$). It appears that maize grain may be completely replaced with wheat bran in the diet of crossbred pigs without any adverse effect on their performance with respect to feed intake, body weight gain and carcass characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.279-286
• /
• 2010

Livestock production in Vietnam is, as in most Asian countries, increasing rapidly and changing into specialized highly intensified operations. The volume of animal excreta generated exceeds the capacity of the operation land base and cannot be utilized efficiently. As a consequence, there is a loss of plant nutrients from livestock farms that causes environmental pollution. This study carried out a feed and excretion experiment measuring fecal characteristic, daily fecal production, daily nitrogen and phosphorous excretion from grower-finisher pigs fed prevalent rations in Vietnam. Furthermore, equations for assessing the excretion were tested, which can be used in farm models for optimal recycling of manure while focusing on reducing pollution. The results indicated that fecal production and nutrient excretion were affected by the different rations tested. This study showed that five selected equations for predicting excretion from grower-finisher pigs in Danish conditions can also be used with precision in Vietnamese pig farming systems. The equations have been proven valid and can, therefore, be used as a much needed tool for assessing fecal production and nitrogen in excreta on pig farms. The study also showed that about 12% of nitrogen excreted was emitted during housing. Waste water contains more than half of the nitrogen excreted, mainly in ammonium form which has a high potential for gaseous emission.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.559-565
• /
• 1998

This study was conducted to investigate the effects of different feeding regimen on the growth and nutrients excretion in finishing pigs. A total of 80 pigs (59.91 kg BW) and 6 pigs (85 kg BW) were employed in a growth trial and metabolic trial, respectively. Treatments were grower-grower (GG), grower-early finisher(GE), early finisher-early finisher (EE), and early finisher-late finisher (EL) diet feeding regimens for feeding trial and G, E, L diets for metabolic trial. Through whole experimental period, no significant difference was found in any of the criteria measured. Pigs fed on a GG regimen gained slightly faster than pigs fed on other feeding regimens, with no significant difference. Although there was a trend that pigs fed on a GG or GE regimen showed improved feed/gain over pigs fed on a EE or EL regimen, the difference also was not significant. In the metabolic trial, dry matter and phosphorus digestibility was not affected by diets, however, phosphorus digestibility tended to be decreased as nutrients contents was decreasing in the diets. Crude protein digestibility was significantly influenced by the nutrients contents in th diets. The data suggested that 11.7% crude protein seemed to be low for the 85 kg pigs. Though nutrients excretion was not significantly influenced by dietary treatment except phosphorus, there was a trend that pigs fed diets with low nutrient content excreted less amount of nitrogen and phosphorus than pigs fed diets with high nutrients content. There was a trend that GG or GE feeding regimen gad a favorable effect on carcass grade when only 10 lighter pigs of each treatment were subjected to statistical analysis. However, with 10 heavier pigs, EE and EL feeding regimen showed better carcass grade, though the difference was not significant. In summary, it seemed that producers generally oversupply the expensive nutrients for the finishing pigs. High nutrient diets do not always guarantee high growth rate of pigs. It rather seems that to meet nutrient requirements for the each growth phase is more important in economical pork production.

• Journal of Animal Science and Technology
• /
• v.52 no.3
• /
• pp.205-212
• /
• 2010

Two experiments were conducted to study the effects of dietary protein level and phase feeding regimens on performance, carcass characteristics and pork quality in growing-finishing pigs. In both experiments, growing pigs (n=90; barrows; Landrace $\times$ Yorkshire $\times$ Duroc) were allotted to 3 treatments. Each treatment had 3 replicate pens comprising 10 pigs in each. In Exp. 1, pigs (average body weight $25.06{\pm}0.57\;kg$) were fed diets having low (17.50-14.50-12.51%), medium (19.49-17.50-13.87%) or high (22.47-19.49-16.36%) CP concentration (LP, MP and HP diets, respectively) diets during grower-finisher I-finisher II phases, respectively. Feeding of MP diet resulted in higher (P<0.05) ADG and better FCR than pigs fed LP diet. Pigs fed HP diet had lower (P<0.05) pork color and marbling score. Meat of pigs fed LP diet had higher (P<0.05) Thiobarbituric acid reactive substances (TBARS), while meat of pigs fed HP and LP diets had greater drip loss than pigs fed MP diet. In addition, meat from pigs fed LP diet was darker while meat of pigs fed HP and MP diets was paler and redder. In Exp. 2, pigs (average body weight $10.40{\pm}0.61\;kg$) were subjected during 126 days to three or four phase regimes of different duration. The treatments T1 and T2 were subjected to four phase feeding regimens (grower I, grower II, finisher I and finisher II) for 22, 42, 32 and 30 days (T1) and 40, 40, 25 and 21 days (T2), respectively, while T3 was subjected to three phase feeding regimen (grower I, grower II and finisherI) for 40, 56 and 30 days, respectively. Duration of phase feeding regimens had no effect (P>0.05) on the performance, carcass traits and meat quality of pigs. These results suggest that both high and low levels of CP have a negative effect on performance and pork quality; however, alterations in the phase feeding regimens do not have any discernible effect on the performance and pork quality in growing-finishing pigs.

• Transactions of Materials Processing
• /
• v.7 no.3
• /
• pp.298-305
• /
• 1998

In hot forging the blocker is a transient shape between the buster and the finisher, In general as the finisher shape becomes complicated the blocker design becomes quite difficult. In the present study an expert system is developed for the blocker die design of axisymmetric hot steel forging. It is a rule based system written in Fortran and AutoLISP operating on a personal computer. In this paper the major rules considered in the system are summarized and several blockers designed by the system are discussed with results of rigid viscoplastic finite element analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.193-200
• /
• 2001

Recently, the concrete floor finishing robot, which can be used for flattening and smoothing the concrete floor, has been developed in Korea and Japan. While the previous research assumes that the concrete floor is deformable and the trowel is rigid in modeling the concrete floor finisher, we assume that the concrete floor is rigid and the trowel is deformable. Based on this assumption, we derived the equations of motion and found the convergent velocity of the concrete floor finisher using the computer simulation. From these results, we can understand the relationship between the motion characteristics and the design and control parameter of the robot.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.83-90
• /
• 2018

In this research, we developed a process design hot-forging technology that precisely forms an inner race. The inner race transmits power to a one-way clutch of an automatic transmission and minimizes the CNC machining allowance. For a multi-stage hollow shape (inner race), we proposed several shapes of blocker and finisher for the precision hot-forging process and analyzed the forging process using DEFORM. The hot-forging process was optimized for several parameters, such as metal flow pattern, forging defect, and forming load. Blockers and finisher dies in the hot-forging process were designed to select optimal shapes from finite element analysis, and experiments were conducted to optimize the hot-forging process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.10a
• /
• pp.118-132
• /
• 1994

This paper investigates a new method to design blocker geometry in rib-web type closed die forging. By examining various forging and blocker geometries, it was found that blocker geometry can be generated by eliminating high frequency mode from finisher geometry. In order to formalize the procedure, low pass filters, which can convert finisher to blocker geometry, are proposed. Also discrete Fourier transform is used for computational efficiency. The blocker geometry designed by the present method are compared with the one by an experienced designer. The blocker geometries are also validated by using FEM simulation. Present results shows that the frequency approach may offer a promising method to design blocker automatically.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.66.6-66
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Technical Background $\textbullet$ Tension control of a Hot Strip Mill $\textbullet$ Simulation $\textbullet$ Conclusion