• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.38-43
• /
• 2009

We provide a method to infer finger flexing motions using a 4-channel surface electromyogram (sEMG). Surface EMGs are harmless to the human body and easily acquired. However, they do not reflect the activity of specific nerves or muscles, unlike invasive EMGs. On the other hand, the non-invasive type is difficult to use for discriminating various motions while using only a small number of electrodes. Surface EMG data in this study were obtained from four electrodes placed around the forearm. The motions were the flexion of the thumb, index, middle, ring, and little linger. One subject was trained with these motions and another left was untrained. The maximum likelihood estimation was used to infer the finger motion. Experimental results have showed that this method could be useful for recognizing finger motions. The average accuracy was as high as 95%.

• The Journal of Korean Medicine
• /
• v.43 no.4
• /
• pp.33-51
• /
• 2022

Objectives: This study aimed to understand the current status of clinical practice patterns of Korean medicine in the treatment of degenerative arthritis of the hip and finger joints using web-based survey. Methods: An e-mail questionnaire survey was conducted with the Korean Medicine Doctor(K.M.D) registered in the Korean Medicine Association. The survey data were analyzed using Microsoft Excel. Results: Although the response rate of the survey was low, the characteristics of the respondents generally reflected the characteristics of the study population. A total of 35.2% of the respondents had heard of the guidelines; however, they did not use them for medical treatment. The reason as answered by 32.8% of the respondents was "not enough treatment time to check the manual and apply it." More than half (78.80%) answered that they were treating patients with both degenerative hip and finger arthritis; however, the average monthly number of first-time patients was ≤5. A total of 379 (60.9%) respondents answered that "acupuncture is very important," which was the only one that exceeded the majority compared to other treatments. As a result of the safety investigation, "Acupuncture, herbal medicine, cupping" were considered high in safety, while "Pharmacopuncture and Bee venom acupuncture" were considered low in safety. Conclusions: This survey helped to determine the current clinical practice patterns of Korean medicine treatments, further providing basic data for CPGs for degenerative arthritis of the hip and finger joints.

• Journal of Korea Game Society
• /
• v.12 no.6
• /
• pp.121-130
• /
• 2012

Due to recent developments in smart media, the desire for interaction between humans and computers has increased. In order to satisfy these needs, gesture recognition fields have been actively studied using image processing. In this paper, we propose a method to recognize Chinese hand numeric representation using image processing. The method binarizes an input image based on skin color to extract region of interest and check the number using the angular information of stretched fingers. Our proposed method has 95.83% of recognition rate.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.44-49
• /
• 1999

From January 1990 to December 1998, 449 consecutive single-digital replantations were reviewed retrospectively in order to determine the essential number of vascular anastomoses for successful finger replantation. The correlations between the number of anastomosed vessels and survival rate were examined according to the amputated digital levels and all of the correlated results were compared with each other statistically. In zone I, The survival rate of the digits with a repaired vein was higher than that of digits treated with external bleeding method. In zone II, the equal number(s) between the arterial and venous repair was an important factor in successful replantation. And the repaired arteries more than repaired veins in number led to venous congestion and resulted in a failure of replantation, which was maybe due to the large amount of arterial input relative to small volume of amputated stump with small sized vein. In zone III, the equal number(s) between the arterial and venous repair was also an important factor in successful replantation. But unlike in zone II, venous congestion was scarcely happened if the venous drainage was sufficient with a repaired large vein alone. In zone IV, two or more arteries and veins were required for successful replantation. In conclusion, it is desirable that the repair of vessels as many as possible to increase the possibility of a good result. But digital amputations and their condition for replantation were variable, therefore, the numbers in vascular repair should to be modified and straightforward as the case may be.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2002

The nail bed is located under the finger nail. The arched portions of the nail bed, which contain a large number of capillary loops, are separated by the valley of the nail bed. The valley of the nail bed does not contain capillary loops. Light is scattered when it propagates through the dermis of skin, and human blood strongly absorbs the light with proper wavelength. By use of the optical properties of the nail bed, we propose an optical technique which extracts the nail bed image of the finger nail. After achieving nail bed images of each individual, we correlated between them. The correlation outputs show that we can identify individuals by comparing the peak heights of the correlation outputs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.200-200
• /
• 2008

This paper reports on electrical characterization by IDC pattern using BST$(Ba_{0.5}Sr_{0.5}TiO_3)$ thin film. BST thin films have been deposited on $Al_2O_3$ Substrates by Nd-YAG pulsed laser deposition with a 355nm wavelength at $700^{\circ}C$. The post deposition annealing at $750^{\circ}C$ in flowing $O_2$ atmosphere for I hours. The capacitance of IDC patterns have been measured from 1 to 10 GHz as a function fo electric field (${\pm}40$ KV/cm) at room temperature using interdiigitated Au electrodes deposited on top of BST. The IDC patterns have three type of fingers number. For the finger paris was increased onto $Al_2O_3$, the capacitance increased. The capacitance of 5 pairs finger was 0.3pF and 10 pairs finger was 0.9pF.

• Molecules and Cells
• /
• v.37 no.4
• /
• pp.302-306
• /
• 2014

Myostatin represses muscle growth by negatively regulating the number and size of muscle fibers. Myostatin loss-of-function can result in the double-muscling phenotype and increased muscle mass. Thus, knockout of myostatin gene could improve the quality of meat from mammals. In the present study, zinc finger nucleases, a useful tool for generating gene knockout animals, were designed to target exon 1 of the myostatin gene. The designed ZFNs were introduced into porcine primary fibroblasts and early implantation embryos via electroporation and microinjection, respectively. Mutations around the ZFNs target site were detected in both primary fibroblasts and blastocysts. The proportion of mutant fibroblast cells and blastocyst was 4.81% and 5.31%, respectively. Thus, ZFNs can be used to knockout myostatin in porcine primary fibroblasts and early implantation embryos.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.264-269
• /
• 2005

The electrostatic comb drive actuator is one of the main building blocks in the field of micro electro-mechanical systems (MEMS). Most of the comb actuators presented previously have fingers that are rectangular in shape which produce a stable, constant force output during actuation. The use of sawtooth fixed fingers in a comb drive, which were presumed to produce an increasing force output with displacement due to the increased number of regions where fringing force, the driving force of comb actuators, appear. The dimensions of the sawtooth were derived from finite element analysis (FEA) of simplified finger models with sawtooth type fingers of various dimension and were compared to the rectangular finger model that showed that the sawtooth type fingers have $7\~9$ times stronger driving force. Finally, comb drive actuators with sawtooth type and rectangular fingers were fabricated and although the gap was bigger, the comb actuator with sawtooth type fingers showed about 1.7 times greater electrostatic force than the one with rectangular fingers at equal driving voltages. In conclusion, using the proposed sawtooth type comb fingers in a comb drive makes it possible to increase its displacement or reduce the driving voltage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.139-146
• /
• 2020

The disadvantage of the general robot cleaner is that it works only on the designated route, so it is impossible to clean the place outside the designated route. Therefore, in this study, the direction control methodology for searching the place other than the designated route based on the finger recognition technology was studied to compensate for the shortcomings of the existing cleaner. Raspberry Pi was used as the main controller and Open CV program was used to recognize the number of fingers. To verify the validity of the proposed methodology, a finger recognition algorithm was implemented using Python language, and as a result of adopting the Logitech C922, the success rate was 100% at 90cm and 70% at 110cm, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.129-137
• /
• 2019

Ubiquitous computing technology is emerging as information technology advances. In line with this, a number of studies are being carried out to increase device miniaturization and user convenience. Some of the proposed devices are user-friendly and uncomfortable with hand-held operation. To address these inconveniences, this paper proposed a virtual button that could be used in watching television. When watching a video on television, a camera is installed at the top of the TV, using the fact that the user watches the video from the front, so that the camera takes a picture of the top of the head. Extract the background and hand area separately from the filmed image, extract the outline to the extracted hand area, and detect the tip point of the finger. Detection of the end point of the finger produces a virtual button interface at the top of the image being filmed in front, and the button activates when the end point of the detected finger becomes a pointer and is located inside the button.