• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.40.3-41
• /
• 2017

Korea Astronomy and Space Science Institute The observation of particles and waves using a single satellite inherently suffers from space-time ambiguity. Recently, such ambiguity has often been resolved by multi-satellite observations; however, the inter-satellite distances were generally larger than 100 km. Hence, the ambiguity could be resolved only for large-scale (> 100 km) structures while numerous microscale phenomena have been observed at low altitude satellite orbits. In order to resolve those spatial and temporal variations of the microscale plasma structures on the topside ionosphere, SNIPE mission consisted of four (TBD) nanosatellites (~10 kg) will be launched into a polar orbit at an altitude of 700 km (TBD). Two pairs of satellites will be deployed on orbit and the distances between each satellite will be from 10 to 100 km controlled by a formation flying algorithm. The SNIPE mission is equipped with scientific payloads which can measure the following geophysical parameters: density/temperature of cold ionospheric electrons, energetic (~100 keV) electron flux, and magnetic field vectors. All the payloads will have high temporal resolution (~ 16 Hz (TBD)). This mission is planned to launch in 2020. The SNIPE mission aims to elucidate microscale (100 m-10 km) structures in the topside ionosphere (below altitude of 1,000 km), especially the fine-scale morphology of high-energy electron precipitation, cold plasma density/temperature, field-aligned currents, and electromagnetic waves. Hence, the mission will observe microscale structures of the following phenomena in geospace: high-latitude irregularities, such as polar-cap patches; field-aligned currents in the auroral oval; electro-magnetic ion cyclotron (EMIC) waves; hundreds keV electrons' precipitations, such as electron microbursts; subauroral plasma density troughs; and low-latitude plasma irregularities, such as ionospheric blobs and bubbles. We have developed a 6U nanosatellite bus system as the basic platform for the SNIPE mission. Three basic plasma instruments shall be installed on all of each spacecraft, Particle Detector (PD), Langmuir Probe (LP), and Scientific MAGnetometer (SMAG). In addition we now discuss with NASA and JAXA to collaborate with the other payload opportunities into SNIPE mission.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.4
• /
• pp.401-413
• /
• 2013

Slurry shield tunnelling ensures stability by pressurizing the tunnel face with the slurry contained in the chamber. It resists water and earth pressure in order to prevent the failure in the tunnel face during tunnel excavation. If the ground is relatively coarse, slurry can not clog the tunnel face and excessive slurry infiltration will occur. In this case chemical compounds or additives should be added to the slurry in order to improve the clogging phenomena at the tunnel face. In this study, the effect of the carbon dioxide gas as an additive to the slurry instead of chemical compounds on the capability of enhancing the clogging in the tunnel face is investigated. Bubbles arising from the carbonate-added slurry are trapped in the soil voids enhancing the clogging capability. This effect is studied in this paper by performing laboratory model tests simulating in-situ conditions, and by adopting the fine particle clogging theory. Tunnel face stability analysis was also performed and it was found that the effective size ($D_{10}$) of soils which can guarantee tunnel stability utilizing the carbonate-added slurry increased from 1.0 mm up to 2.6 mm. Moreover, Stability analysis showed that the tunnel face is stable if the ${\lambda}$(deposition coefficient) value is greater than $0.007sec^{-1}$.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.177-184
• /
• 2010

When cement grout is used for waterproofing of grounds, important roles are played by fluidity, particle size and bleeding. The most important element which determines their characteristics is the water/cement ratio of grout. Moreover in order to improve the efficiency of soil permeation, micro cement with a smaller average diameter is used in addition to ordinary portland cement. Besides the mixing ratio and cement diameter, the condition of ground is also of fundamental importance in the efficiency of permeation. In order to evaluate grout in terms of permeation ability into ground, we need a field test of grounting, which is cost and time consuming. In this paper we present a laboratory test method in which the suitability and efficiency of grouts are simply and more practically tested. In Korea neither a test standard nor devices are available to simulate grouting in a laboratory. We devised a grout injection equipment in which grouting was reproduced in the same condition with different materials, and suggested a standard for the production of specimens. Our tests revealed that the efficiency of injection increases with the water/cement ratio. We also found that more efficiently injected is the grout with the order of decreasing size; MS8000, micro cement, and ultra fine cements, and colloidal super cement.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.385-391
• /
• 2000

A kinetic study on the preparation of iron powder by hydrogen reduction of ferrous chloride vapor has been carried out both experimentally and theoretically. For the preparation of iron powder, ferrous chloride was vaporized and transported to a reaction zone by Ar gas used as carrier. Ferrous chloride vapor and hydrogen were mixed and subject to a reduction reaction at high temperature to produce iron powder and HCI gas. Iron powder was collected with organic solvent at the end of reaction zone and HCI gas was also absorbed in a caustic soda solution to determine the conversion ratio of ferrous chloride. For the development of rate equations, a 1st-order reaction and equilibration of ferrous chloride vapor with Ar gas were assumed. According to the results, the rate constant, k could be expressed as $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$ and the activation energy was found to be 53.84kJ/mole. From TEM observation, the particle size distribution of iron powder produced was found to be in the range of $0.1~1.0{\mu\textrm{m}}$ which was not significantly influenced by reaction temperature or gas flow rates.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.554-563
• /
• 2006

Numerous epidemiological studies have shown stronger associations between $PM_{2.5}$ and both mortality and morbidity than $PM_{10}$. The association of $PM_{2.5}$ with respiratory mortality was examined in Seoul, during the period of $1996{\sim}2002$. Because $PM_{2.5}$ data were available for only 10% of this time period, a prediction regression model was developed to estimate $PM_{2.5}$ concentration. Death count due to respiratory-related diseases(total respiratory mortality; ICD-10, J00-J98) and death counts(cause-specific mortality) due to pneumonia(ICD-10, J12-J18), COPD(ICD-10, J40-J44) and asthma(ICD-10, J45-J46) were considered in this study. Averaged daily mortality was 5.6 for total respiratory mortality and 1.1 to 1.6 for cause-specific mortality. Generalized additive Poisson models controlling for confounders were used to evaluate the acute effects of particle exposures on total respiratory mortality and cause-specific mortality. An IQR increase in 5-day moving average of $PM_{2.5}(22.6{\mu}g/m^3)$ was associated with an 8.2%(95% CI: 4.5 to 12.1%) increase in total respiratory mortality The association of $PM_{2.5}$ was stronger for the elderly ($\geq$65 years old, 10.1%, 95% CI: 5.8 to 14.5%) and for males(8.9%, 95% CI: 2.1 to 11.3%). A $10{\mu}g/m^3$ increase in 5-day moving average of $PM_{2.5}$ was strongly associated with total respiratory mortality in winter(9.5%, 95% CI: 6.6 to 12.4%), followed by spring(3.1%, 95% CI: -1.2 to 7.5%), which was a different pattern with the finding in North American cities. However, our results are generally consistent with those observed in recent epidemiological studies, and suggest that $PM_{2.5}$ has a stronger effect on respiratory mortality in Seoul.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.49-57
• /
• 2001

In this study, the distribution of lectin receptors in culutured fibroblast was explored using colloidal gold label complexed with lectin WGA purified from wheat germ (Triticum vulgare). The lectin WGA gold complex, shown to recognize GlcNAc (N-acetylgalactosamine) and NeuNAc (N-acetylneuraminic acid) regions, was applied to detect binding sites in Lowicryl HM 20 sections viewed under electron microscope Labeled sections of the culutured fibroblast revealed gold particles specifically distributed on the cytoplasm and cell surface of the fibroblast. Labeling of 24 hours culutured fibroblast was then quantified and compared to that of 72 hours culutured fibroblast. 24 hours culutured fibroblast sections resulted in specific gold particle distribution on the cytoplasmic vesicle of the culutured fibroblast. These results indicate that lectin WGA receptors are located in the cytoplasmic vesicle and cell surface of the 24 hours culutured fibroblast, and on the cell surface of the 72 hours culutured fibroblast. Therefore, the GlcNAc and NeuNAc regions on the cell surface appear to be functionally associated with cell-recognition and protection from other cell of the tissue, and linked with secretion and exocytosis of the fibroblast cytoplasm.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.84-96
• /
• 1992

This study was carried out to examine the $H^+$ transport mechanism by observing the properties of cellular membrane having an ${\alpha}$ type of carbonic anhydrase (CA)-containing cells in turtle urinary bladder. The urinary bladder consists of a heterogenous population of cells. As a result of fine observation with traditional thin-section electron microscopy. the bladder epithelium has three different cell types on mucosal surface. They are a basal cell, a granular cell and a third type of CA-rich cell. The CA-rich cells are divided into two distinct smaller groups within them and called them ${\alpha}$ type and ${\beta}$ type of CA cells. The ${\alpha}$ type of CA cells are responsible for the proton secretion using the proton pumps on the apical plasma membrane, while the ${\beta}$ type of CA cells secrete bicarbonate via an oppositely-directed proton pumps in their basolateral plasma membrane. After performing the freeze-fracture technique, it was shown that there were distributed a large number of intramembranous particles having a special structure on the apical membrane of ${\alpha}$ type of CA-rich cells in the process of their $H^+$ secretion. In turtle bladder ${\alpha}$ type of CA-rich cells, this particle was the only prominent structure in the apical membrane. These intramembrane rod-shaped particles probably represent the integral membrane components of the proton pump. This result may explain that carbonic anhydrase within epithelial cell of urinary bladder takes part in formation of $H^+$ and bicarbonate, that active transport of $H^+$ is done, and that the reabsorption of bicarbonate suggests transport mechanism containing $H^+$ secretion. However, it seems that more studies are required for considering their regular transport pathway.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.313-319
• /
• 2015

This study relates to an investigation into semi-dry manufacturing process of BP sludge based on non-heating production method. In this study, we conducted a research into reduction of water content ratio which arose from mixture of BP by-products of high water content ratio(50% or higher) with industrial by-products to use such BP by-products as construction materials in large quantity. We measured the reduction rate of water content ratio at the feeding ratio of water content reduction agent(1:0.5) in BP by-products. The results showed that water content ratio was the lowest with 18.5% in the mixture of PA+CFA(1:0.5). Moreover, water content ratio ranged between approximately 9.2% and 11.4% at the age of 1 day to 2 days at the aging temperature of $20-30^{\circ}C$, suggesting that the water content ratio was in the range within 10% which was a level suitable for use as construction material in this study. Meanwhile, we compared and evaluated the physical properties of non-heated BP by-products based on post-aging pulverization method. The results showed that there was no significant difference, depending on pulverization method. When production efficiency and economic feasibility were taken into consideration, it was found desirable to use fine particle pulverizer or pin mill enabling continuous production.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.97-105
• /
• 1999

In the binary system of SiC and carbon, porosity and pore size distribution of green body was controlled by varying pH, by the addition of polyelectrolyte dispersants, and by using different particle size of starting powders. The preforms having different green microstructure were fabricated by slip casting from suspensions having different dispersion condition. The reaction bonding process was carried out for these preforms. The condition of reaction bonding was 1600$^{\circ}C$ and 20 min. under vacuum atmosphere. The analyses of optical and SEM were studied to investigate the effect of green microstructure on that of reaction bonded silicon carbide and subsequently the mechanical properties of sintered body was investigated. Different green microstructures were obtained from suspensions having different dispersion condition. It was found that the pore size could be remarkably reduced for a fine SiC(0.5$\mu\textrm{m}$). The bimodal microstructure was not found in the present study, which is frequently observed in the typical reaction bonded silicon carbide. It is considered that the ratio between SiC and C was responsible for the formation of bimodal microstructure. For the preform fabricated from the well dispersed suspension, the 3-point bending strength of reaction-bonded silicon carbide was 310${\pm}$40 MPa compared to the specimen fabricated from relatively agglomerated particles having lower value 260${\pm}$MPa.

• Asian Journal of Turfgrass Science
• /
• v.13 no.4
• /
• pp.181-190
• /
• 1999

This study was carried out to survey green system, area, green slope, green turfgrass variety, green section, and particle size of green construction materials, and to investigate and evaluate the characteristics of Design and Construction in Korean golf course green for improving the quality of Korean golf course into that of the international golf course held international tournament. The results were as follows. 1. The greens of 129 Korean golf courses consisted of 2(two) green system and 1(one) green system. 2(two) green system was 50.8%, 1(one) green system was 40.7%, and 1+2 green system was 8.5% of them. 2. In 48 Korean golf courses, the green area of 2(two) green system was mostly 400~$600\m^2$(56.5%) and the green area of 1(one) green system was mostly 600~$800\m^2$(47.8%). In 48 Korean golf courses, 1.5~3% green slope appeared the highest frequency(50.0%) and the next was 3~5%(29.4%). 3. Penncross variety was the highest frequency(71.2%). The next was mixed variety (Penncross+Crenshaw, Penn A-1, Pennlinks, or Penneagle/SR 1020+SR 1019) and the frequency of mixed variety was 7.6%. 4. In 48 Korean golf courses, 70~80cm total thickness of green appeared the highest frequency(36.1%), 10~20cm thickness of green mixed sandy layer appeared the highest frequency(43.6%), and 10~20cm thickness of green coarse sandy layer appeared the highest frequency(55.6%). 0~10cm thickness of green gravel layer appeared the highest frequency(67.6%), 20~30cm thickness of green drain layer appeared the highest frequency(52.8%), and 20~30cm width of green drain layer appeared the highest frequency(44.4%). Below 1mm sand diameter used in green mixed sandy layer appeared the highest frequency(46.2%), below 2mm or over 2mm sand diameter used in green coarse sandy layer appeared the highest frequency(31.4%). 20~40mm coarse gravel diameter used in green gravel layer appeared the highest frequency(43.2%) and 0~20mm fine gravel diameter used in green gravel layer appeared the highest frequency(65.8%). 20~40mm gravel diameter used in green drain layer appeared the highest frequency(64.1%).