• 제목/요약/키워드: Fine rock particles

검색결과 15건 처리시간 0.026초

세립분 함유율이 조립재료의 전단강도에 미치는 영향에 관한 기초적 검토 (A Review on the Effects of Fine Particle Content on Shear Strength of Coarse Geomaterials)

  • 신동훈;이경필;구방서
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.861-866
    • /
    • 2003
  • While coarse geomaterials with abundant fine particles are common, comparatively little information is available to know their engineering behaviour. In this study, the effects of fine particle content of coarse geomaterials on engineering properties, such as shear strength, deformability and permeability were investigated. It was known through large triaxial compression tests that when they are compared with good rock materials, the rock materials with abundant fine particles have different compaction characteristics, low shear strength, low stiffness, and low permeability.

  • PDF

화강암 파쇄시 풍화정도가 골재 입도분포 및 미석분 발생에 미치는 영향 (Effect of the Degree of Weathering on the Distribution of Aggregate Particle Size and the Generation of Fine Rock Particles during Crushing of Granite)

  • 유병운;이진영;이동길;정영욱
    • 자원환경지질
    • /
    • 제55권5호
    • /
    • pp.429-438
    • /
    • 2022
  • 본 연구는 골재 생산과정에서 화감암 파쇄시 풍화정도가 골재의 입도분포 및 미석분 발생량에 미치는 영향을 평가하였다. 경북 거창의 골재 채석장에서 슈미스 햄머 측정값으로 강도 차가 있는 3개 지역에서 암석 시료를 채취하였다. 실내에서 동일 조건에서 죠크러셔로 파쇄를 한 후 입도분석, 광물 분석, 화학분석과 풍화지수를 산출했다. 슈미트 햄머 측정값은 56, 28, <10로 나타났고 풍화지수인 CIA 및 CIW 값도 차이가 나타나 시료들을 풍화도에 따라서 경암, 연암 및 풍화암으로 구분했다. 경하에서 풍화암으로 갈수록 작은 입도분포를 보이며, 변질광물로 견운모와 같은 점토광물의 비율이 높아졌다. 경암은 장석 및 석영 비율이 높았고 백운모 및 고령석(kaolinite)의 비가 작았다. 죠크러셔 파쇄 결과 경암은 굵은 파쇄물(13.2mm)을 많이 생산한 반면 풍화가 진행된 연암 및 풍화암은 가는 파쇄물(4.75mm)을 생산했다. 전자는 베타분포 곡선 특징을 보였고 후자는 쌍봉 분포 곡선을 보였다. 미석분(0.71mm 체 이하; 중량 %) 발생은 경암, 연암, 풍화암에서 13%<21%<22%로 증가하여 풍화도가 클수록 미석분이 많이 발생했다. 미석분은 습식 골재 생산 공정에서 샌드 유닛(모래탈수장치)의 운전으로 회수된다. 따라서 골재생산 공정에서 슬러지 발생량을 최소화하기 위해 사이클론의 최적 운전에 대한 연구가 필요할 것으로 판단되었다.

품질불량 골재가 고강도 콘크리트의 공학적 특성에 미치는 영향 (Effect of Poor Quality Aggregates on the Properties of High Strength Concrete)

  • 이순재;송원루;이홍규;이명호;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.113-114
    • /
    • 2015
  • This paper is to investigate the effect of poor quality aggregate source used in Korea on the mixture proportion and strength development of the high strength concrete fixed at 450 kg/m3 of cement contents. For aggregate kinds, good quality crushed stone from KS certified manufacturer and low quality crushed stone from non certified construction field are used. For fine aggregates, river sand, land sand, sea sand and mixed sand are also used. It is found that the use of low quality aggregates resulted in an increase of water demand considerably due to poor gradation of aggregate and excessive fine particles. Test results indicate that the use of low quality aggregate also decreases the compressive strength compared with that of good quality aggregate.

  • PDF

Experimental study on Microbially Induced Calcite Precipitation for expansive soil stabilization

  • Zheng Lu;Yu Qiu;Jie Liu;Chengcheng Yu; Hailin Yao
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.85-96
    • /
    • 2023
  • Microbially induced carbonate precipitation (MICP) is extensively discussed as a promising topic for ground stabilization. The practical effect of stabilizing the expansive soil is presented in this paper with a logical process from the bacterial activity to the treatment technology. Temperature, pH, shaking frequency, and inoculation amount are discussed to evaluate the bacterial activity. The physic-mechanic properties are also evaluated to discuss the effect of the MICP process on expansive soil. Results indicate that the MICP method achieves the mitigation of expansion. The treated soil has a low proportion of fine particles (< 5 ㎛), the plasticity index significantly decreases, and strength values improve much. MICP process has a significant cementation effect on the soil matrix. Moreover, the infiltration model test presents the coating effect on the topsoil. According to the relation between the CaCO3 content and the treatment effect, the topsoil has better treatment than the deeper soil.

Treatment of Rolled Steel Coolant Wastewater by Superconducting High Gradient Magnetic Separation

  • Kim, Tea-Hyung;Ha, Dong-Woo;Oh, Sang-Soo;Kim, Ho-Sup;Ko, Rock-Kil;Lee, Nam-Jin;Kwon, Jun-Mo;Kim, Young-Hun;Kung, Chae-Hun;Ha, Tae-Wook
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.354-354
    • /
    • 2009
  • We have developed the prototypes of superconducting magnetic separation system with high temperature superconductor wire. This separation filter system consist of magnetized matrix SUS430 wire and acrylic frame. This study introduced rolled steel process coolant wastewater applied superconductor HGMS(High Gradient Magnetic Separation). HGMS treatment have acted high efficient method for various wastewater. We have surveyed superconducting magnetic separation technology and reviewed the status of related industries using applied superconductivity. In our basic preliminary experiment using HGMS, it was made clear that the fine para-magnetic particles in the wastewater obtained from rolling process of steel can be separated with high efficiency. We investigated the ability of magnetic flock formation, which used inorganic materials and polymer coagulants. We had a purpose to remove SS of coolant at steel factory. Maximum coagulation remove rate of SS 98%. Removing ratio of $Fe_3O_4$ fine particles in wastewater showed over than 99% in the wastewater containing magnetic fines after four times of repetition of separation.

  • PDF

Recent Development of Science and Technology of Hard Materials in Japan

  • Hayashi, Koji
    • 한국분말재료학회지
    • /
    • 제5권4호
    • /
    • pp.303-311
    • /
    • 1998
  • Hard materials such as hardmetal, coated hardmetal, cermet, ceramics and diamond or c-BN sintered compact are a kind of grain-dispersed alloy with high volume of hard particles. These are used for cutting tools, wear-resistant tools, rock bits, high pressure apparatus, etc. The annual production in Japan is about 1.7 billion dollars (200 billion yen). This is greatly owed to the development in science and technology which has been accomplished by applying new concepts such as fine or uniform grain microstructure, orientation of crystal grains, functionally graded material, artificial lattice and coherent bonding in recent years. In this review, the development in recent years in Japan is briefly summarized.

  • PDF

청미천에서의 하천 유사 측정 및 분석(II) - 유사의 광물특성 및 오염도 - (Field Measurement and Analysis of Fluvial Sediment in the Cheongmi-Stream(II) - Mineralogical and Contaminative Characteristics of Sediment Particles -)

  • 우효섭;이진국
    • 물과 미래
    • /
    • 제24권3호
    • /
    • pp.49-60
    • /
    • 1991
  • 본 연구는 청미천에서의 하천유사의 측정 및 분석에 관한 연구의 제2편으로, 청미천의 원부교 및 한평교 지점에서 채취된 하상토의 광물특성 및 오염도를 분석하였다. 하상토의 광물특성 분석결과에 의하면, 청미천의 사질유사의 주 조성 광물은 석영이며 이 밖에 장석과 암편류가 상당량 포함되어 있어, 문헌상에 알려진 유사의 일반적인 광물특성 결과와 대체로 일치하고 있다. 또한, 사질유사의 형상계수(SF)는 약 0.7로서 외곡의 경우의 \ulcorner균 형상계수와 일치하고 있다. 한편, 점토질 유사의 광물구성 성분은 illite, kaolinite, chlorite 등이며 bentonite는 함유되어 있지 않다. 유수 및 하상토의 오염분석 결과에 의하면, 지표수와 하상토내 간극수의 유기물 및 중금속의 함유량은 큰 차이가 없는 것으로 나타났다. 이것은 시료를 채취한 시기가 '90년 9월 대홍수 직후이며 따라서 대부분의 기존 하상토 및 간극수가 하류로 쓰려 내려가고 상류에서 유수에 씻긴 신선한 하상토가 대신 덮혔기 때문으로 추정된다. 한편, 하상토의 대부분을 차지하는 모래의 경우 하상토와 주위 경작지의 중금속 함유량이 비슷하게 나타났으나, 이토 등 미립토사의 경우는 하상토가 주위 경작지보다 특히 수은 및 아연을 훨씬 많이 함유하고 있는 것으로 나타났다. 이러한 미립토사는 wash load의 형태로 하류로 이송되어 홍수터 등에 침전되어 새로운 오염원이 될 수 있다.

  • PDF

불포화 이암풍화토의 동적거동 (Dynamic Behavior of Unsaturated Decomposed Mudstone Soil)

  • 배중선;이주상;김주철;이종규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.541-548
    • /
    • 2001
  • The interest in the dynamic properties of soils has increased strongly because of earthquake, heavy traffic, and foundations undergo high amplitude of vibrations. Most of soils in Korean peninsula are composed of granite soils, especially the decomposed mudstone soils are widely spread in Pohang areas, Kyong-buk province. Therefore, it Is very important to investigate the dynamic properties of these types of soils. The most important soil parameters under dynamic loadings are shear modulus and material dampings. Furthermore, few definitive data exist that can evaluate the behavior of unsaturated decomposed mudstone soils under dynamic loading conditions. The investigations described in this paper is designed to identify the shear modulus and damping ratio due to a surface tension for the unsaturated decomposed mudstone soils ulder low and high strain amplitude, For this purpose, the resonant column test and the cyclic triaxial test were performed. Test results and data have shown that the optimum degree of saturation under low and strain amplitude is 32 ∼ 37% which is higher than that of decomposed granite due to the amount of fine particles as well as the type and proportion of chief rock-forming minerals.

  • PDF

The treatment of coolant wastewater of rolling plate process by High Gradient Magnetic Separation

  • Kim, Tae-Hyung;Ha, Dong-Woo;Kwon, Jun-Mo;Sohn, Myung-Hwan;Baik, Seung-Kyu;Oh, Sang-Soo;Ko, Rock-Kil;Kim, Ho-Sup;Kim, Young-Hun;Park, Seong-Kuk
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권4호
    • /
    • pp.8-11
    • /
    • 2009
  • This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

화강암의 풍화산물에 대한 기계적 풍화지수의 특성에 관한 연구 (A Study on the Indexes and Properties of Mechanical Weathering to Granite Distributed in Korea)

  • 임종호
    • 대한지리학회지
    • /
    • 제28권2호
    • /
    • pp.99-111
    • /
    • 1993
  • 풍화작용은 여러 영역에 의해 지배를 받고 있으며 지형형성작용 중 가장 기본이 된다. 우리나라와 같이 화강암류로 구성된 지역에서는 다른 암석류로 구성된 지역보다 풍화작용이 활발히 진행되어 풍화산물이 많이 존재한다. 본 연구에서는 화강암 풍화산물이 형성된 영역과 기계적 풍화지수 및 특성을 살펴보았다. 그 결과 토화학적 풍화작용은 clayey gruss에서, 지화학적 풍화는 gruss에서, 쪼개짐작용은 풍화암석에서 강하게 작용하고 있었다. 기계적 풍화지수는 일반적으로 clayey gruss 계통은 5내외이고 gruss는 10내외 정도이었다. 그리고 입자붕괴는 풍화작용과 열수작용에 의해 형성되었으며, 세립질로 구성된 식토계통은 주로 열수영역을 많이 받았고 조립질로 구성된 사토계통은 풍화작용을 강하게 받았다.

  • PDF