• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.25-37
• /
• 1997

The synthesis of high purity and ultra-fine $BaTiO_{3}$ by precipitation with gaseous $NH_{3}$ as precipitator was investigated to find an alternative process to solve various problems of present wet methods. This study consisted of two parts ; synthesis of $BaTiO_{3}$ precipitation with gaseous $NH_{3}$ and test of electrical property for the $La_{2}O_{3}$ doped $BaTiO_{3}$. The proper condition for the synthesis of $BaTiO_{3}$ by precipitation with gaseous $NH_{3}$ is as follows. The pH was 9.0. $H_{2}O_{2}$ mole ratio to $TiCl_{4}$ was 10. $NH_{3}$ gas follow rate did not influence the synthesis of $BaTiO_{3}$. The calcination temperature of $BaTiO_{3}$ was $300^{\circ}C$. Also, the synthesis of $La_{2}O_{3}$-doped $BaTiO_{3}$ was tested through the wet process. Under these condition, the shape of prepared $BaTiO_{3}$ powder was spherical type and the size of that was about $0.2{\mu}m$. After the powder was pressed, this green body was sintered at the $1300^{\circ}C$. Under these conditions, the water absorptance and the density of the obtained sintered body were below 0.04 %, 5.2 g/$cm^{3}$, respectively. Also the grain size of that was about $10{\mu}m$ and it was similar to commercial product.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.72-80
• /
• 2016

There are various methods of developing latent fingerprints from evidence found at crime scenes. Crime scene investigators should choose appropriate techniques among them depending on the conditions of the evidences. In this study, we compared the three methods using forensic light sources to develop latent fingerprints on multi-colored surfaces. We selected the various samples according to color, shape and texture of the surfaces and developed the latent fingerprints using fluorescent powder, IR(Infrared) photography and Episcopic Co-axial Illumination. Fluorescent powder was highly effective on all surfaces. IR photography was also effective, but only on the not dark surfaces. Episcopic Co-axial Illumination was effective only on the flat and polished surfaces. Although fluorescent powder was fine regardless of the characteristics of the surfaces, IR photography was better on certain surfaces.

• Journal of Powder Materials
• /
• v.14 no.5
• /
• pp.281-286
• /
• 2007

Ordered $L1_0$ to FePt nanoparticles are strong candidates for high density magnetic data storage media because the $L1_0$ phase FePt has a very high magnetocrystalline anisotropy $(K_u{\sim}6.6-10{\times}10^7erg/cm^3)$, high coercivity and chemical stability. In this study, the ordered $L1_0$ FePt nanoparticles were successfully fabricated by chemical vapor condensation process without a post-annealing process which causes severe particle growth and agglomeration. The $Fe_{50}Pt_{50}$ nanopowder was obtained when the mixing ratio of Fe(acac) and Pt(arac) was 2.5 : 1. And the synthesized FePt nanoparticles were very fine and spherical shape with a narrow size distribution. The average particle size of the powder tended to increase from 5 nm to 10 nm with increasing reaction temperature from $800^{\circ}C$ to $1000^{\circ}C$. Characterisitcs of FePt nanopowder were investigated in terms of process parameters and microstructures.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.115-121
• /
• 2017

In this work, p-type Bi-Sb-Te alloys powders are prepared using gas atomization, a mass production powder preparation method involving rapid solidification. To study the effect of the sintering temperature on the microstructure and thermoelectric properties, gas-atomized powders are consolidated at different temperatures (623, 703, and 743 K) using spark plasma sintering. The crystal structures of the gas-atomized powders and sintered bulks are identified using an X-ray diffraction technique. Texture analysis by electron backscatter diffraction reveals that the grains are randomly oriented in the entire matrix, and no preferred orientation in any unique direction is observed. The hardness values decrease with increasing sintering temperature owing to a decrease in grain size. The conductivity increases gradually with increasing sintering temperature, whereas the Seebeck coefficient decreases owing to increases in the carrier mobility with grain size. The lowest thermal conductivity is obtained for the bulk sintered at a low temperature (603 K), mainly because of its fine-grained microstructure. A peak ZT of 1.06 is achieved for the sample sintered at 703 K owing to its moderate electrical conductivity and sustainable thermal conductivity.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.938-943
• /
• 2000

TiCl$_4$, 물 및 1-propanol의 혼합용액으로부터 미립 TiO$_2$분말 제조시, 1-propanol과 물의 부피비, 반응온도, 반응유지시간 및 TiCl$_4$mole 농도에 따른 분말 특성 및 결정상 생성에 대해 조사하였다. 반응온도가 3$0^{\circ}C$ 이상일 때 Ti 수화물의 초기 침전이 생성되었고 반응온도가 TiCl$_4$mole 농도가 증가함에 따라 입자크기는 증가하였고 $600^{\circ}C$ 하소시 1-propanol과 물의 부피비가 2보다 크고 반응온도가 7$0^{\circ}C$보다 낮을 때 주결정상은 anatase였다. 입자크기가 미세하고 입자크기 분포가 좁은 범위를 갖는 조건은 1-propanol과 물의 부피비가 2, 반응온도가 7$0^{\circ}C$, TiCl$_4$mole 농도가 0.2 mole/ι일 때였으며, 결정상의 생성은 1-propanol과 물의 부피비가 2, 반응온도가 3$0^{\circ}C$ 이상일 때 anatase에서 rutile로 전이하는 온도가 높아졌다. 이와 같은 반응인자에 따른 효과는 용매의 유전상수, 티타니아의 용해도, 입자의 표면전위 등의 효과와 관계가 있었다.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.108-112
• /
• 2018

The present study demonstrates the effect of raw powder on the pore structure of porous W-Ni prepared by freeze drying of camphene-based slurries and sintering process. The reduction behavior of $WO_3$ and $WO_3-NiO$ powders is analyzed by a temperature programmed reduction method in Ar-10% H2 atmosphere. After heat treatment in hydrogen atmosphere, $WO_3-NiO$ powder mixture is completely converted to metallic W without any reaction phases. Camphene slurries with oxide powders are frozen at $-30^{\circ}C$, and pores in the frozen specimens are generated by sublimation of the camphene during drying in air. The green bodies are hydrogen-reduced at $800^{\circ}C$ and sintered at $1000^{\circ}C$ for 1 h. The sintered samples show large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The strut between large pores, prepared from pure $WO_3$ powder, consists of very fine particles with partially necking between the particles. In contrast, the strut densification is clearly observed in the Ni-added W sample due to the enhanced mass transport in activation sintering.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.58-62
• /
• 2017

A319 aluminum alloy containing 6.5% Si and 3.5% Cu as major alloying elements has been widely used in machinery parts because of its excellent castability and crack resistance. However it needs more wear resistance to extend its usage to the severe wear environments. It has been known that hyper-eutectic Al-Si alloy having more than 12.6% Si contains pro-eutectic Si particles, which give better wear resistance and lubrication characteristics than hypo-eutectic Al-Si alloy like A319 alloy. In this study, it was tried to clad hyper-eutectic Al-Si alloy on the surface of A319 alloy. In the experiments, Al-36%Si alloy powder was mixed with organic binder to make a fluidic paste. The paste was screen-printed on the A319 alloy surface, melted by pulsed Nd:YAG laser and alloyed with the A319 base alloy. As experimental parameters, the average laser power was changed to 111 W, 202 W and 280 W. With increasing the average laser power, the melting depth was changed to $142{\mu}m$, $205{\mu}m$ and $245{\mu}m$, and the dilution rate to 67.2 %, 72.4 % and 75.7 %, and the Si content in the cladding layer to 16.2 %, 14.6 % and 13.7 %, respectively. The cross-section of the cladding layer showed very fine eutectic microstructure even though it was hyper-eutectic Al-Si alloy. This seems to be due to the rapid solidification of the melted spot by single laser pulse. The average hardness for the three cladding layers was HV175, which was much higher than HV96 of A319 base alloy. From the block-on-roll wear tests, A319 alloy had a wear loss of 5.8 mg, but the three cladding layers had an average wear loss of 3.5 mg, which meant that an increase of 40 % in wear resistance was obtained by laser cladding.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.215-219
• /
• 2012

An attempt was made to evaluate creep reliability of two commercial Ni-based superalloys by using ultrasonic wave. The materials include fine-grained PM alloy fabricated by mechanical alloying and subsequent hot isostatic pressing, and IN738LC cast alloy with a grain size of a few cm. Microstructural parameters (fraction of creep cavity and size of ${\gamma}^{\prime}$ precipitates) and ultrasonic parameters (velocity, attenuation) were measured to try to find relationships between them. Ultrasonic velocity decreased with creep cavity formation in PM alloy. On the other hand, no distinct changing trend of ultrasonic velocity was observed for IN738LC alloy. Ultrasonic attenuation was found to have a linear correlation with the size of ${\gamma}^{\prime}$ precipitates and was suggested as a potential parameter for monitoring creep reliability of IN738LC alloy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.509-520
• /
• 1996

Ultrafine calcim carbonate powders with the size of $0.05~0.1\;{\mu}m$ and the calcite phase were synthesized by the nozzle spouting method, which could be only obtained when high calcium ion concentration within slurry was maintained at the beginning of the reaction. But, in the regions of low ${Ca(OH)}_2$ concentration (0.5~1.0 wt%) or high ${Ca(OH)}_2$ concentration (<3.0 wt%), synthesized calcium carbonate powder was shown the large particle size with agglomeration. To obtain ultrafine calcium carbonate powder in this region, the methods of slurry circuation and $CO_{2}$ gas supply were changed during reaction. Resultly, it was possible to synthesize ultrafine particles (${\approx}0.05{\mu}\textrm{m}$)in the regions of low ${Ca(OH)}_2$ concentration (${\approx}0.5wt%$) and high ${Ca(OH)}_2$ concentration (${\approx}0.5wt%$), which can not be obtained the fine calcium carbonate powder still now.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.