• 공업화학
• /
• 제9권6호
• /
• pp.817-821
• /
• 1998

$Ba(OH)_2{\cdot}8H_2O$와 $Ti(OC_2H_5)O_4$를 사용하여 고순도 $BaTiO_3$ 분말을 수열 합성법으로 제조하고 열처리 온도에 따른 분말 특성을 조사하였다. 이때 제조된 분말 내에는 미량의 $H_2O$ 및 $OH^-$가 존재함을 확인할 수 있었으며 열처리 온도가 $200^{\circ}C$에서 $1000^{\circ}C$로 증가할수록 $BaTiO_3$의 평균입경은 $0.022{\mu}m$에서 $0.072{\mu}m$로 증가되었고 tetrogonality(c/a)도 1.02에서 1.2로 증가되어 정방정 형태로 상전이가 나타났다. 또한 $400^{\circ}C$로 3시간 동안 열처리한 후 이들 분말들을 $1250^{\circ}C$로 소결할 때 8120의 비유전율값이 얻어졌으며 표면 활성화 에너지값은 9680 kcal/mol이었다.

• 한국세라믹학회지
• /
• 제42권9호
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• 한국광물학회지
• /
• 제21권3호
• /
• pp.297-305
• /
• 2008

의성 옥동광산에 적치되어 있는 광미는 미세분말로 이루어져 있으며, 주 구성광물은 황철석, 섬아연석, 녹니석, 일라이트, 사장석, 스멕타이트, 석고 등이다. 점토광물 중 스멕타이트는 광미 적치장 상부에 집중되어 있고 하부로 갈수록 녹니석이 증가한다. 석고는 광미 적치장 표면에 주로 나타나는데 이는 광미와 반응한 침출수가 증발하면서 침출수에 포함된 Ca와 $SO_4$가 반응하여 침전된 증발잔류물로 추정된다. 전자현미경 관찰 결과 광미에 포함된 섬아연석은 표면뿐만 아니라 내부까지 풍화되어 있는 것으로 보아 오랜 시간동안 지하수와 반응하여 다량의 Zn과 $SO_4$를 침출수에 부가되었을 것으로 추정된다.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.470-475
• /
• 2012

$La_{1-x}Sr_xMnO_3$(LSM,$0{\leq}x{\leq}0.5$) powders as the air electrode for solid oxide fuel cell were synthesized by a glycine-nitrate combustion process. The powders were then examined by X-ray diffraction(XRD) and scanning electron microscopy (SEM). The as-formed powders were composed of very fine ash particles linked together in chains. X-ray maps of the LSM powders milled for 1.5 h showed that the metallic elements are homogeneously distributed inside each grain and in the different grains. The powder XRD patterns of the LSM with x < 0.3 showed a rhombohedral phase; the phase changes to the cubic phase at higher compositions($x{\geq}0.3$) calcined in air at $1200^{\circ}C$ for 4 h. Also, the SEM micrographs showed that the average grain size decreases as Sr content increases. Composite air electrodes made of 50/50 vol% of the resulting LSM powders and yttria stabilized zirconia(YSZ) powders were prepared by colloidal deposition technique. The electrodes were studied by ac impedance spectroscopy in order to improve the performance of a solid oxide fuel cell(SOFC). Reproducible impedance spectra were confirmed using the improved cell, which consisted of LSM-YSZ/YSZ. The composite electrode of LSM and YSZ was found to yield a lower cathodic resistivity than that of the non-composite one. Also, the addition of YSZ to the $La_{1-x}Sr_xMnO_3$ ($0.1{\leq}x{\leq}0.2$) electrode led to a pronounced, large decrease in the cathodic resistivity of the LSM-YSZ composite electrodes.

• 폴리머
• /
• 제31권1호
• /
• pp.74-79
• /
• 2007

[ $PPy^+DBS^-$ ] 복합체는 유화중합에 의해 제조되었고 이때 iron(III) chloride($FeCl_3$)는 개시제로, dodecyl benzene sulfonic acid(DBSA)는 계면활성제 및 도판트로 사용되었다. Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)는 chlorosulfonic acid(CSA)를 사용하여 설폰화되었고 양극은 $PPy^+DBS^-$ 복합체, 도전제 그리고 바인더로 구성되며 이때 바인더로 PPO와 설폰화된 poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO)를 사용하였다. $PPy^+DBS^-/SPPO$ 양극은 $PPy^+DBS^-/PPO$에 비해 약 50% 높은 충 방전 성능을 나타내었는데 이는 SPPO가 바인더뿐만 아니라 도판트로 작용했기 때문이다. 더욱이 바인더로 사용된 고분자의 설폰화는 전도성 고분자와의 coulombic attraction을 유발시켜 두 상간의 혼화성을 증가시켰을 뿐만 아니라 양극과 전해질 사이의 접촉면적을 증가시켜 전기화학적으로 우수한 성능을 나타나게 했다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1171-1171
• /
• 2001

Quantitative analysis is an important requirement in exploration, mining and processing of minerals. There is an increasing need for the use of quantitative mineralogical data to assist with bore hole logging, deposit delineation, grade control, feed to processing plants and monitoring of solid process residues. Quantitative analysis using X-Ray Powder Diffraction (XRD) requires fine grinding and the addition of a reference material, or the application of Rietveld analysis to XRD patterns to provide accurate analysis of the suite of minerals present. Whilst accurate quantitative data can be obtained in this manner, the method is time consuming and limited to the laboratory. Mid infrared when combined with multivariant analysis has also been used for quantitative analysis. However, factors such as the absorption coefficients and refractive index of the minerals requires special sample preparation and dilution in a dispersive medium, such as KBr to minimize distortion of spectral features. In contrast, the lower intensity of the overtones and combinations of the fundamental vibrations in the near infrared allow direct measurement of virtually any solid without special sample preparation or dilution. Thus Near Infrared Spectroscopy (NIR) has found application for quantitative on-line/in line analysis and control in a range of processing applications which include, moisture control in clay and textile processing, fermentation processes, wheat analysis, gasoline analysis and chemicals and polymers. It is developing rapidly in the mineral exploration industry and has been underpinned by the development of portable NIR spectrometers and spectral libraries of a wide range of minerals. For example, iron ores have been identified and characterized in terms of the individual mineral components using field spectrometers. Data acquisition time of NIR field instruments is of the order of seconds and sample preparation is minimal. Consequently these types of spectrometers have great potential for in-line or on-line application in the minerals industry. To demonstrate the applicability of NIR field spectroscopy for quantitative analysis of minerals, a specific example on the quantification of lateritic bauxites will be presented. It has been shown that the application of Partial Least Squares regression analysis (PLS) to the NIR spectra can be used to quantify chemistry and mineralogy in a range of lateritic bauxites. Important, issues such as sampling, precision, repeatability, and replication which influence the results will be discussed.

• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.311-318
• /
• 1998

The reaction bonded alumina ceramics with reinforced particles which have low shrinkage were pro-duced by blending of SiC or TiC or ZrO2 powders to the mixture of Al metal and Al2O3 powder. The powd-ers were attrition milled isostantically pressed and preheated tio 110$0^{\circ}C$ with a heating rate of $1.5^{\circ}C$/min The specimens were then sintered at the temperature range 1500 to 1$600^{\circ}C$ for 5 hours with a heating rate of 5$^{\circ}C$/min. The specimens showed 5-9% weight gain and 2-9% dimensional expansion through the complete oxidation of Al after preheating up to 11--$^{\circ}C$ the overall dimensional change of the specimens after the reaction sintering at 1500-1$600^{\circ}C$ was 6-12% The maximum densities were 92% theoretical. The fine grain-ed(average grain size :0.4 ${\mu}{\textrm}{m}$) microstructure were observed in the specimen with ZrO2 and SiC. But the microstructure of specimen with TiC was relatively coarse.(average grain size : 2.1 ${\mu}{\textrm}{m}$) The mullite phase was formed by the reaction of Al2O3 and SiO2 in a specimen with SiC. In the TiC contained specimen TiC was oxidized into TiO2 and finally reacted with Al2O3 to form Al2TiO5 during sintering.

• 한국식생활문화학회지
• /
• 제13권3호
• /
• pp.183-189
• /
• 1998

Consumption and general views of housewives in Inchon on commercial kochujang(fermented red pepper-soy paste) were surveyed by questionnaires in June through August, 1997. Respondents considered the taste (88.1%) as the most important factors to determine the quality of kochujang and preferred hot(621%) and bright red colored kochujang(70.6%) with fine red pepper powder Eighty seven percent of respondents preferred the traditional kochujang to the commercial one mainly due to the taste and the reliability to the materials kochujang. Especially all housewives at the age of sixty and over preferred traditional kochujang and those at twenties had a higher preferrence for the commercial one compared to other age groups. While 51.4% of the respondents consumed both e traditional and commercial kochujang, 16.2% and 32.5% did only commercial and traditional kochujang, respectively. Consumption of commercial kochujang decreased with age and main food with it was pan fried dishes(33.7%). Convenience(76.6%) was the major reason for purchasing commercial fried and most respondents(44.1%) selected the special brand from the previous experience of their own. Problems to be improved in commercial kochujang were better taste(31.3%) and development of diverse usage(62.4%).

• 한국가스학회지
• /
• 제22권4호
• /
• pp.49-54
• /
• 2018

원료의약품 제조회사에서는 화학반응에 의해 제품이 생산되기 때문에 화학반응 전 단계인 원료 분말을 투입하는 과정에서 화재 폭발사고가 자주 발생하고 있다. 이에 대한 실질적인 화학반응 단계에서 사고원인 분석을 통한 안전대책 연구는 많지 않다. 본 연구에서는 화학반응 단계에서의 위험성을 알아보고자 붕소제거 반응공정에서 발열에 대한 실험을 진행했다. 연구대상 반응공정은 실제 원료의약품 공장에서 합성하고 있는 제품을 대상으로 반응열량계를 이용하여 열적 거동을 조사하였다. 실제 제조현장의 반응공정에서 냉각실패 등의 이유로 발열할 수 있는 합성반응의 최대온도와 기술적 근거에 의한 최대온도를 비교해서 위험도를 예측하였다. 이러한 결과를 가지고 실제 제조현장에 적용하여 발열에 따른 폭주반응 위험성을 제어하는 안전대책을 제시하였다.

• 약학회지
• /
• 제40권4호
• /
• pp.400-410
• /
• 1996

In oder to develop the controlled release of drugs from the suppositories, in vitro drug release and in vivo absorption in rabbits were investigated. Various suppo sitory forms with hollow cavities, into which drugs in the form of fine powder or solid dispersion system(SDS) could be placed, were utilized. The oleaginous Witepsol H-15 (WH-15) as a base, and indomethacin (IDM) of a very slightly soluble drug and propranolol-HCL (PPH) of a very soluble drug were employed as model drugs. The in vitro drug release showed that the cumulative release amount of PPH from PPH-(methylcellulose) MC-SDS and PPH-(ethylcellulose) EC-SDS hollow type suppositories reached 40% and 12% in 6 hrs,respectively. On the other hand, the drug release for a conventional suppository was 80% in 6 hrs. For the IDM suppositories,the cumulative drug release from IDM-(polyvinylpyrrolidone) PVP-SDS hollow type suppositories reached 99% in 24 hrs, whereas that from a conventional suppository reached 85%. An in vivo experiment with rabbits showed that IDM-PVP-SDS hollow type suppository delayed the absorption of IDM, significantly. The $t_{max},\;C_{max}\;and\;AUC_{0{\to}8}$ of IDM-PVP-SDS suppository were 60 min, 12.12${\mu}g$/ml and 2657${\mu}g$/ml/min, respectively. The $t_{max},\;C_{max}\;and\;AUC_{0{\to}8}$ of controlled group were 20 min, 15.49${\mu}g$/ml and 2190${\mu}g$/ml/min, respectively.