• 한국표면공학회지
• /
• 제24권1호
• /
• pp.24-24
• /
• 1991

Cr-N films were deposited on low-carbon steel sheets by the reactive arc-induced ion plating (AIIP). The influence of the deposition conditions (nitrogen pressure and substrate bias voltage) on the crystal orientation, morphology and microhardness of the Cr-N films has been investigated using x-ray diffractometer and scanning electron microscope. The impurities and contaminations on the surface and at the interface, and the layer-by-layer compositions of the film have been analyzed using scanning Auger multiprobe (SAM) and glow discharge spectroscope (GDS). The mixed state of Cr and Cr2N turned out to have a fine fibrous structure. The Cr2N films were deposited at a wide range of nitrogen flow rates. The orientations of Cr2N films were mainly (110) and (111), and the intensity of the (111) peak increased as the substrate bias voltage increased. The micorstructure of the Cr2N film was dense and no columnar structure was observed. The films in the mixed state of Cr2N and CrN were also dense without columnar structure. The maximum microhardness of the Cr-N films was 2400 kg/$\textrm{mm}^2$ at 10gf load.

• 한국의상디자인학회지
• /
• 제4권2호
• /
• pp.127-138
• /
• 2002

The recent fashion trend of knit wear is now changing to the various fibrous color combination which emphasizes the plain texture. It supports the human body curvature which is influenced by the slim style of woven wear. In this research work, the general characteristics and knit wear fashion trend are studied. The metallic fiber and fancy yarn are used widely as fiber materials for knit in nowadays. However, the light and functional materials are preferred. The general characteristics of knit which gives the feeling of light and warm are still prevailing using pure wool, kid mohair, and mixed wool with polyester. In order to provide the soft touch feeling, smoothness of fine fiber, and feeling of sponge, several kinds of finishing techniques such as bulky, felting, bonding, and quilting process are usually adopted. The knit wear fashion trend is mainly consisted of the basic design items, and it gives the feeling of luxurious and elegance. The more youthful feeling is adapted for the general style of knit wear of the certain target age. The woven wear trend such as season color, line and pattern are applied in knit wear trend in recent days.

• 한국표면공학회지
• /
• 제25권1호
• /
• pp.24-33
• /
• 1992

Cr-N films were deposited on low-carbon steel sheets by the reactive arc-induced ion plating (AIIP). The influence of the deposition conditions (nitrogen pressure and substrate bias voltage) on the crystal orientation, morphology and microhardness of the Cr-N films has been investigated using x-ray diffractometer and scanning electron microscope. The impurities and contaminations on the surface and at the interface, and the layer-by-layer compositions of the film have been analyzed using scanning Auger multiprobe (SAM) and glow discharge spectroscope (GDS). The mixed state of Cr and Cr₂N turned out to have a fine fibrous structure. The Cr₂N films were deposited at a wide range of nitrogen flow rates. The orientations of Cr₂N films were mainly (110) and (111), and the intensity of the (111) peak increased as the substrate bias voltage increased. The microstructure of the Cr₂N film was dense and no columnar structure was observed. The films in the mixed state of Cr₂N and CrN were also dense without columnar structure. The maximum microhardness of the Cr-N films was 2400 kg/㎟ at 10 gf load.

• 한국광물학회지
• /
• 제20권4호
• /
• pp.255-260
• /
• 2007

중국 서부에 분포하는 황토대지의 뢰스(loess)는 아시아 내륙에서 발생하는 광물먼지의 퇴적물일 뿐만 아니라, 우리나라 봄철 황사의 기원물질이기도 하다. 간빙기의 뢰스는 퇴적 후에 고토양으로 풍화되는 과정에서 풍성 일차 탄산염 광물 입자들이 용해되어 이차 탄산염광물로 재침전된다. 뢰스 및 고토양의 광물학적 분석에 의하면 풍성 탄산염 입자는 대부분 실트 크기이나, 재침전된 이차 탄산염광물은 너비가 $30{\sim}50nm$ 정도로 일정하고 다양한 길이를 갖는 나노 크기의 방해석들이었다. 나노방해석은 황토대지에서 점토광물과 함께 실트질 뢰스와 고토양의 세립 기질을 구성하는 주요 자생 광물로서, 우리나라에서 채집된 황사 입자에서 확인된 나노 방해석들의 기원물질로 해석된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.95-98
• /
• 2006

Filtration by fibrous filter is one of the Principle methods used for removing pollutant particles in the liquid. Because of the increasing need to protect both human health and valuable devices from exposure to fine particles, filtration has become more important. Filters have been developed with modified surface charge characteristics to capture and adsorb particles by electrokinetic interaction between the filter surface and particles contained in water. The main purposes of this study are to develop and evaluate the performance evaluation of the apparatus for making a positively charged porous filter media and to analyze the surface characteristics of the filter media for capturing negavitely charged contaminants mainly bacteria and virus from water. The experimental apparatus consists of a mixing tank, a vacuum pumping system, a injection nozzle, a roller press and a controller. The filter media is composed of glass fiber(50-750 nm), cellulose($10-20{\mu}m$) and colloidal charge modifier. The characteristics of filter media is analyzed by SEM(Scanning Electron Microscopy), AFM(Atomic Force Microscopy) and quantified by measuring the zeta potential values.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.562-572
• /
• 2005

Statement of problem : Titanium is widely used as an implant material lot artificial teeth. Also, studies on surface treatment to form a fine passive film on the surface of commercial titanium or its alloys and improving bioactivity with bone have been carried out. However, there is insufficient data about the biocompatibility of the implant materials in the body. Purpose: The purpose of this study was to examine whether the precipitation of apatite on titanium metal is affected by surface modification. Materials and methods: Specimens chemically washed for 2 minute in a 1:1:1.5 (in vol%) mixture of 48% HF 60% $HNO_3$ and distilled water. Specimens were then chemically treated with a solution containing 97% $H_2SO_4$ and 30% $H_2O_2$ at $40^{\circ}C$S for 1 hour, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface were examined with TF-XRD, SEM, EDX and XPS. Also, commercial purity Ti specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. Conventional aluminium and stainless steel 316L were also implanted for comparison. Results and conclusions : The results obtained were summarized as follows. 1. An amorphous titania gel layer was formed on the titanium surface after the titanium specimen was treated with a $H_2SO_4$ and $H_2O_2$ solution. The average roughness was $2.175{\mu}m$ after chemical surface treatment. 2. The amorphous titania was subsequently transformed into anatase by heat treatment at $400^{\circ}C$ for 1 hour. 3. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $46.98{\mu}m$ in chemically-treated Ti, and 52.20, 168.65 and $100.95{\mu}m$ respectively in commercial pure Ti, aluminum and stainless steel 316L without any treatment.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.53-68
• /
• 2015

The purpose of this study is to analyze check pattern of nail art from 2011 to 2013. The results of this study are as follows; 1) Check pattern of nail art is total 257 patterns, and there are 84 argyle, 29 tartan, 24 harlequin, 24 over, 23 window-pane, 15 stitcheds, 13 hound tooth, 10 block, 10 madras, 8 gingham, 8 gradation, 7 shepherd, and 2 tattersall check patterns. Through this result, in nail art, the relatively simple patterns such as a vertical pattern, a horizontal pattern, and cross or overlap diagonal line are used more than elaborate and complex check patterns of a fibrous tissue from a weaving process. 2) In check pattern of nail art, N-affiliated color and R-affiliated color are remarkably well-used, because of the effects of argyle, tartan, window-pane, harlequin, stitched, over, and hound tooth check patterns used the most during the past three years. Especially, most tartan, harlequin, over, and hound tooth check patterns use their own special colors such as R-affiliated colors and N-affiliated colors as it is, and argyle, window-pane, stitched, and over check patterns use well by arranging N-affiliated colors and R-affiliated colors. 3) The most used expressive technique is hand painting to express check pattern in nail art, because new products related to UV gel are well launched. These materials can draw fine line that is hard to express by existing polish easily and simply, and not only have set quickly hard, so procedure time is very short, so it is compatible to draw check pattern personally, but also it is well covered, so check pattern is more clearly expressed.

• Applied Microscopy
• /
• 제19권1호
• /
• pp.27-33
• /
• 1989

Six cases of ovarian fibrous stromal neoplasm were studied clinically, light microscopically and ultrastructurally for the clinico-pathological evidences of hormone production. Of the six cases, two cases were fibroma, three cases were fibrothecoma, and one case was thecoma. Two cases of fibroma and one fibrothecoma were associated with clinical history of menstrual abnormality, however fat staining of the tumor was negative or weakly positive. Two cases of fibrothecoma and one thecoma were negative for the clinical history of hormone imbalance. Fat stain of those cases revealed positive in varying intensity. Ultrastructural examination of fibroma-thecoma group revealed dark and pale cells by their nuclear characteristics. The dark cells had indented nucleus and abundant cytoplasmic organelles of rough ER, Golgi apparatus and mitochondria. Intracytoplasmic cisternal spaces were seen in the dark cell cytoplasm and some lipid droplets were seen around the cisternae. Pale cells had pale swollen nucleus and fine chromatins. Their cytoplasm showed scanty amount of organelles. Fibroma-thecoma spectrum showed varying degree of population of dark cells, light cells and intervening collagenous stroma. Lipid droplet was structurally associated with intracytoplasmic cisterna and they were frequently seen in thecoma and two of the fibrothecoma. But clinical history of hormone imbalance was poorly related to the light microscopic morphology and ultrastructural organization.

• 한국응용곤충학회지
• /
• 제32권1호
• /
• pp.90-100
• /
• 1993

본 연구는 꼬리명주나비(Sericinus montela Grey)의 유충을 재료로 하여 투과전자현미쟁과 주사전자현미경을 이용하여 혈구의 미세구조를 관찰하였다. 꼬리명주나비 종령유충의 혈구는 구조와 특징에 따라 5종류로 구분되었다. 원시혈구(Prohemocyte)는 세포내에 하나의 큰 핵과 미분화된 세포내 소기관을 가지고 있었다. 부정형혈구(Plasmatocyte)는 섬유다발을 가진 방추행 또는 난형의 비교적 큰 세포로, 특히 방추형의 세포는 길게 발달한 핵을 갖고 있었다. 과립혈구(Granular cell)는 세포질내에 다양한 과립과 잘 발달한 소기관을 함유하고 있었으며 원형질 돌기를 많이 가지고 있었다. 소구형혈구(Spherule cell)는 세포질내에 미세한 물질을 함유한 소구(spherule)를 가자고 있으며 성숙한 세포는 소구내의 물질을 혈림프내로 방출시켰다. 편도혈구(Oenocytoid)는 세포질내 전자밀도가 높은 물결로 채워져 있으며 소기관은 잘 발달되어 있지 않았다.