• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.22-29
• /
• 2011

In this study, the glass fiber drawing from a silica preform in the furnace for the optical fiber manufacturing process is numerically simulated by considering the radiative heating of cylindrically shaped preform. The one-dimensional governing equations of the mass, momentum, and energy conservation for the heated and softened preform are solved as a set of the boundary value problems along with the radiative transfer approximation between the muffle tube and the deformed preform shape, while the furnace heating is modeled by prescribing the temperature distribution of muffle tube. The temperature-dependent viscosity of silica plays an important role in formation of preform neck-down profile when the glass fiber is drawn at high speed. The calculated neck-down profile of preform and the draw tension are found to be reasonable and comparable to the actual results observed in the optical fiber industry. This paper also presents the effects of key operating parameters such as the muffle tube temperature distribution and the fiber drawing speed on the preform neck-down profile and the draw tension. Draw tension varies drastically even with the small change of furnace heating conditions such as maximum heating temperature and heating width, and the fine adjustment of furnace heating is required in order to maintain the appropriate draw tension of 100~200 g.

• Steel and Composite Structures
• /
• v.30 no.4
• /
• pp.337-350
• /
• 2019

The objective of this paper is to investigate the confinement coefficient of concrete-filled square stainless steel tubular (CFSSST) stub columns under axial loading. A fine finite 3D solid element model was established, which utilized a constitutive model of stainless steel considering the strain-hardening characteristics and a triaxial plastic-damage constitutive model of concrete with features of the parameter certainty under axial compression. The finite element analysis results revealed that the increased ultimate bearing capacity of CFSSST stub columns compared with their carbon steel counterparts was mainly due to that the composite action of CFSSST stub columns is stronger than that of carbon steel counterparts. A further parametric study was carried out based on the verified model, and it was found that the stress contribution of the stainless steel tube is higher than the carbon steel tube. The stress nephogram was simplified reasonably in accordance with the limit state of core concrete and a theoretical formula was proposed to estimate the ultimate bearing capacity of square CFSSST stub columns using superposition method. The predicted results showed satisfactory agreement with both the experimental and FE results. Finally, the comparisons of the experimental and predicted results using the proposed formula and the existing codes were illustrated.

• Journal of Chest Surgery
• /
• v.4 no.1
• /
• pp.51-54
• /
• 1971

37 years old female was admitted with chief complaints of dyspnea on exertion and hemoptysis. Past history and family history were non-contributory. Physical examination showed Grade III systolic murmur at the apex, which transmitted to the back. E. K. G. and X-ray findings were compatible with the mitral insufficiency. With small size of Beall mitral valve, mitral valve replacement was done under the cardia-pulmonary bypass using hemodilution technic. Patient was tracheotomized after operation and assisted respiration was done for four weeks. Postoperatively, all signs were fine and patient walked around the ward without any difficulty, but she was in psychotic state. On postoperative 60th day, she complained of sudden dyspnea and on chest film, tracheal stenosis was found and recannulation of the tracheal tube was made. Thereafter, she was quite fine until postoperative 110th day when she, by berself, removed the tracheal cannula and died of asphyxia. Autopsy findings of the valve showed no thrombosis, no variance of the valve, and good endothelization of the valve cuffs. Asphyxia, due to removal of the tracheal connula by herself under psychotic state, was considered to be the cause of death in this patient who had tracheal stenosis after tracheostomy.

• ETRI Journal
• /
• v.46 no.1
• /
• pp.71-81
• /
• 2024

Recent advances in deep learning for speech and visual recognition have accelerated the development of multimodal speech recognition, yielding many innovative results. We introduce a Korean audiovisual speech recognition corpus. This dataset comprises approximately 150 h of manually transcribed and annotated audiovisual data supplemented with additional 2000 h of untranscribed videos collected from YouTube under the Creative Commons License. The dataset is intended to be freely accessible for unrestricted research purposes. Along with the corpus, we propose an open-source framework for automatic speech recognition (ASR) and audiovisual speech recognition (AVSR). We validate the effectiveness of the corpus with evaluations using state-of-the-art ASR and AVSR techniques, capitalizing on both pretrained models and fine-tuning processes. After fine-tuning, ASR and AVSR achieve character error rates of 11.1% and 18.9%, respectively. This error difference highlights the need for improvement in AVSR techniques. We expect that our corpus will be an instrumental resource to support improvements in AVSR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.172-180
• /
• 2019

In this study, the microstructure and gamma-ray shielding efficiency of CRT glass mortar specimen were evaluated with replacement ratio and material properties. The results show that as the replacement ratio of CRT waste glass increases, the volume of pores with diameters below 50 nm and above 400 nm is increased. Also, the half-value layer of CRT glass mortar decreased with the increasing of linear attenuation coefficient. In addition, compressive and flexural strength were reduced when CRT waste glass was replaced as the fine aggregate, but the mechanical performance of CRT mortar specimen could be obtained by substitution of the mineral admixture.

• Carbon letters
• /
• v.9 no.4
• /
• pp.294-297
• /
• 2008

A CNT-$TiO_2$ nano composite was prepared from titanium chloride ($TiCl_4$) via sol-gel process using multi walled carbon nano tube (MWCNT) followed by calcination at $450^{\circ}C$. Spectral analysis revealed that the formed $TiO_2$ resided on the carbon in anatase form. The effect of adsorption was investigated using aqueous solution of methylene blue and procion blue dye. The photochemical reaction of CNT-$TiO_2$ composite in aqueous suspensions was studied under UV illumination in batch process. The reaction was investigated by monitoring the discoloration of the dyes employing UV-Visible spectro-photometeric technique as a function of irradiation time. The catalyst composites were found to be efficient for the photodegradation of the dye.

• Korean Journal of Veterinary Research
• /
• v.62 no.1
• /
• pp.8.1-8.6
• /
• 2022

The aim of this prospective study was to investigate the effects of focal spot size of X-ray tube on sharpness of clinical radiographic images of dogs and cats. Radiographic images of 24 stifle joints, 15 carpi, 18 lumbar spines, 61 thoraxes, and 47 abdomens of 102 dogs and 4 cats were obtained in the present study, using 2 X-ray tubes with nominal focal spots of 2.0 mm and 0.6 mm, respectively. The sharpness of specific anatomical structures in all the images of 5 projections was assessed. The radiographic sharpness of various anatomical structures of lumbar spine and cortex of stifle with fine focal spot was increased significantly compared with broad focal spot images. In addition, the blurred motion was significantly higher in the fine focal spot images of thorax. In conclusion, our study suggests that a selective use of fine foci for imaging of lumbar spine or cortex of stifle enhanced radiographic sharpness.

• Magazine of RCR
• /
• v.14 no.1
• /
• pp.29-35
• /
• 2019

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.418-421
• /
• 2002

Fundamental study on quasi-monochromatic parallel radiography using a polycapillary plate and a plane-focus x-ray tube is described. The x-ray generator consists of a negative high-voltage power supply, a filament (hot cathode) power supply, and an x-ray tube. The negative high-voltage is applied to the cathode electrode, and the transmission type target (anode) is connected to the ground potential. The maximum voltage and current of the power supply were -100 kV (peak value) and 3.0 mA, respectively. In this experiment, the tube voltage was regulated from 20 to 25 kV, and the tube current was regulated by the filament temperature and ranged from 1.0 to 3.0 mA. The exposure time is controlled in order to obtain optimum film density, and the focal spot diameter was about 10 mm. The polycapillary plate is J5022-21 made by Hamamatsu Photonics Inc., and the outside and effective diameters are 87 and 77 mm, respectively. The thickness and the hole diameter of the polycapillary are 1.0 mm and 25 ${\mu}$m, respectively. The x-rays from the tube are formed into parallel beam by the polycapillary, and the radiogram is taken using an industrial x-ray film of Fuji IX 100 without using a screen. In the measurement of image resolution, we employed three brass spacers of 2, 30, and 60 mm in height. By the test chart, the resolution fell according to increases in the spacer height without using a polycapillary. In contrast, the resolution slightly fell with corresponding increases in the height by the polycapillary. In angiography, fine blood vessels of about 100 ${\mu}$m are clearly visible.

• The Korean Journal of Zoology
• /
• v.33 no.3
• /
• pp.354-364
• /
• 1990

The ultrastructure and silk formational process of the flagelliform glands, one of the capture thread producing organs in the orb web spider (Nephila clavata L. Koch), have been studied with electron microscope. A pair of flagelliform glands consist of three distinct regions: excretory duct, storage sac and convoluted tail. This gland is connected to the large spinning tube (spigot) of the posterior spinnerets with two pairs of aggregate glands, and showed a characteristic spigot structure called "triad". The excretory duct consists of three long segments surrounded by the same sheath of connective tissue. The distal duct near the spinning tube bears the electron lucent subcuticles which have the functions of water removal and orientation of the silk fiber, whereas the proximal duct near the sac contains the cuticule precursor transported through the intercellular space. Cytoplasms of the sac and tail regions have well developed rough endoplasmic reticulum and contain the round secretory granules commonly, but the electron densities and internal textures of the granules do not coincided. Adjacent epithelial cells are connected with the specialized septate junctions, and secretory granules accumulated at the apical pole are released to the lumen by the apocrine secretion.secretion.