• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.66-83
• /
• 1996

We report petrography, mineral chemistry, and major and trace element chemistry for rare tholeiites in Cheju island where alkalic rocks predominate. Available age data indicate that the tholeiitic magmatism was younger than 0.49Ma, possibly younger than 0.17 Ma. The tholeiites are generally fine-grained, porphyritic rock and show intergranular texture with lath-shaped plagioclase ($An_{61-46}$), orthopyroxene (bronzite) and olivine ($Fo_{78-67}$). Characteristically, two kinds of clinopyroxene (pigeonite and augite) occur only in groundmass. The tholeiites have normative quartz and show limited compositional variations ($SiO_2$=51.0-52.5 wt%; Mg＃=54-60). Major and transitional metal element variations of tholeiites are distinct from those of alkaline rocks in MgO diagram, suggestingthat the two rock types cannot be simply related to differentiation process from the same magma. The ratios among $K_2O$, Rb, Ba, Nb and La are similar for both tholeiites and alkali basalts, however the ratios between the elements (P, Y and Yb) having an affinity with garnet and the above elements are higher for tholeiites than for alkali basalts. These trace element ratios suggest that the tholeiites and alkali basalts were produced by different degrees of partial melting from a similar sources material (garnet lherzolite mantle).

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.1-7
• /
• 2006

This paper attempts to locate and define a quartzite deposit in Geochang, Kyongsangnam Province in order to establish its commercial viability. The quartzite deposit (Poongwon Mine) occurs as lens or boudinage at the contact between mica schist of the Deogyusan formation and granite gneiss. During Precambrian, regional metamorphism and granitization may have caused the formation ot quartzite layers through recrystallization and rearrangement of silica components derived from older sedimentary rocks, probably chert and/or sandstone. The deposit is composed of fine-grained milky, or light yellowish quartz showing weak laminations with fairly dense and rough appearance in outcrop. It reaches about $60\;m(height)\times140\;m(length)\times35m(width)$ with attitude of $N57^{\circ}E-N8^{\circ}4E\;and\;51^{\circ}-60^{\circ}NW$. The average grade of the quartzite samples is $SiO_2=94.4\;wt\%,\;A1_2O_3=3.3\;wt\%,\; Fe_2O_3=0.8\;wt\%,\;K_2O=0.7\;wt\%$, which can be used for foundry, constructional materials, or concrete making. The proved reserve was estimated as 200,811 tonnage.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.146-156
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A physical, morphological, and chemical characteristic of fly ash has been analyzed. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, ash recycling and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution and gravimeter. Morphological characteristic of fly ash is performed using a scanning electron micrograph and an optical microscope. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry (ICP). The distribution of fly ash size was ranged from 15 to 25 $\mu$m in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, relative opacity, coloration, cenosphere and plerosphere. The spherical fly ash might be generated at the condition of complete combustion. The size of fly ash was found to be increased the with particle-particle interaction of agglomeration and coagulation. Fly ash consisted of $SiO_2\;Al_2O_3\;and\;Fe_2O_3$ with 85% and carbon with 3~10% of total mass.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.338-356
• /
• 1994

Sediment samples from the continental shelf of the South Sea of Korea are analysed to determine the concentration of Al, Fe, Mn, cu, Ni, Zn, Co, Cr and Pb. among these samples, fine-grained sediments were also analysed by a sequential extraction technique to know geochemical forms of the metals in this environments. The total concentration of Al, Fe, Cr, Ni, Cu and Zn in bulk sediments decreased gradually with the increase of distance from the coastal zone. This distribution patterns are well coincide with grain size distribution. However, the patterns of Mn, co and Pb do not follow such and overall distribution. The concentration of Pb, particularly, did not show any features in areal distribution, which may be result from different pathways to the sediments, compared to the other metals. the speculation data show that a considerable amount of Cd, Mn and Co are bounded in the carbonate fraction, accounting for 42.8%, 40.3% and 30.6%, respectively. Cu, Zn, Mn and Fe are largely associated to oxide fraction with proportions of 34.4%, 23.1%, 15.5% and 13.7%, respectively. However, the metals in residual fraction account for more than 50% of the total metal concentration, except for Mn. These observations emphasize that residual fraction in the dominant component controlling the elemental concentration.quartz and glauconite grains.Accordingly,these sediments are interpreted as an extension part of transgressive sand deposit that are widely distributed on the continental shalf floor of southern Yellow Sea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.169-179
• /
• 2011

To investigate the controlling factor and accumulation of trace metal concentrations in Chun-su Bay sediments, grain-size, specific surface area, organic carbon content, calcium carbonate content, and concentration of Al, Fe, Na, K, Mg, Ca, Ti, Mn, P, S, Ba, Sr, Li, Co, Cr, Ni, Cu, Zn, As, Cd, Cs, Sc, V, Sn were analyzed. Controlling factors of metals were quartz-dilution, calcium carbonate and coarse sand or K-feldspar. Although the distribution of V, Co, Cr, Ni, Cu, Zn, Sn, and Cd concentration was explained by grain-size effiect, Mn and As showed the similar importance of grain-size effect and coarse sand or K-feldspar factors. By virtue of enrichment factor and 1 M HCl experiment, there were little enrichment in all the trace metals in bay sediments, which were explained well by geochemical properties of sediments. Since the concentration levels of As in coarse sand were high as much as those in fine-grained sediments and it was combined with Mn oxide (1 M HCl leached) and K-feldspar (residual), it was suggested that when the enrichment of As in sediments would be assessed, it is necessary to separate the coarse sand from bulk sediments or to use only sediments with higher than 10% in < $16{\mu}m$ fraction.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.5-13
• /
• 2016

This research is focused on the seepage behavior of embankment which had the weak zone with big permeability. The distributed TDR (Time Domain Reflectometer) and point sensors such as settlement gauge, pore water pressuremeter, vertical total stressmeter, and FDR (Frequency Domain Reflectometer) sensor were used to measure the seepage characteristics and embankment behavior. Also, the measured data were compared to the data of 2-D and 3-D numerical analysis. The dimension of model embankment was 7 m length, 5 m width and 1.5 m height, which is composed of fine-grained sands and the water level of embankment was 1.3 m height. The seepage behavior of measuring and numerical analysis were very similar, it means that the proper sensing system can monitor the real-time safety of embankment. The result by 2-D and 3-D numerical analysis showed similar saturation processing, however in case of weak zone, the phreatic lines of 2-D showed faster movement than that of 3-D analysis, and finally they converged.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.5-14
• /
• 2007

The quantity of noxious wastes generated by the growth in industrialization and population in all over the world and its potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. Incorporated technique with PVDs have been used for dewatering from fine-grained soils for the purpose of ground improvement by means of soil flushing and soil vapor extraction systems. This paper is to evaluate several key parameters that affected to the performance of the PVDs specifically with regard to: well resistance of PVD, zone of influence, and smear effects. In the feasibility of contaminant remediation was evaluated in pilot-scale laboratory experiments. Well resistance is affected on the vertical discharge capacity of the PVDs under the various vacuum pressures. The discharge capacity increases consistently in areal extents with higher applied vacuum up to a limiting vacuum pressure. The head values for each piezometer at different vacuum pressures show that the largest head loss occurs within 14 cm of the PVD. Air flow rates and head losses were measured for the PVD placed in the model test box and the gas permeability of the silty soils was calculated. Increasing the equivalent diameter results in a decrease in the calculated gas permeability. It is concluded that the gas permeability determined over the 1,500 to 2,000 $cm^3/s$ flow rates are the most accurate values which yields gas permeability of about 3.152 Darcy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.246-258
• /
• 1988

Semi-quantitative analysis of $less-than-2{\mu}m$ clay minerals in thirty-nine superficial sediments from the Chinju Bay, southern coast of Korea, was made to reveal the distribution, provenance and dispersal pattern of fine-grained sediments. Additional nine samples were also taken from the Choryang Cheon (a river draining the kaolin-rich Hadong area) to investigate the influence of river a discharge. Grain size analysis for the Chinju Bay sediment samples was performed simultaneously as an aid to understand the sediment types and depositional environments. Except for the northeastern part, clayey mud predominates the entire bay. Average relative abundance of the four major clay minerals, I. I., illite, kaolinite, chlorite and smectite, is $55.1\%,\;23\%,\;21.5\%\;and\;0.4\%$, respectively. Although illite dominant clay mineral, the average content is about $10\~20\%$ tourer than that of the nearby continental shelf area. On the contrary, kaolinite content in the bay is about $10\%$ higher than that of the shelf area. Recent clay minerals of the Chinju Bay are mainly derived from the nearby inland area through numerous rivers and streams. Transport from shelf area, however. also seems to be important.

• Ocean and Polar Research
• /
• v.39 no.2
• /
• pp.85-106
• /
• 2017

The Lago Sofia conglomerate in southern Chile is a deep-marine gravelly deposit, which is hundreds of meters thick and kilometers wide and extends laterally for more than 100 km, filling the foredeep trough of the Cretaceous Magallanes Basin. For understanding the depositional processes and environments of this gigantic deep-sea conglomerate, detailed analyses on sedimentary facies, architecture and paleoflow patterns were carried out, highlighting the differences between the northern (Lago Pehoe and Lago Goic areas) and southern (Lago Sofia area) parts of the study area. The conglomerate bodies in the northern part occur as relatively thin (< 100 m thick), multiple units intervened by thick mudstone-dominated sequences. They show paleoflows toward ENE and S to SW, displaying a converging drainage pattern. In the southern part, the conglomerate bodies are vertically interconnected and form a thick (> 400 m thick) conglomerate sequence with rare intervening fine-grained deposits. Paleoflows are toward SW. The north-to-south variations are also distinct in sedimentary facies. The conglomerate bodies in the southern part are mainly composed of clast-supported conglomerate with sandy matrix, which is interpreted to be deposited from highly concentrated bedload layers under turbidity currents. Those in the northern part are dominated by matrix- to clast-supported conglomerate with muddy matrix, which is interpreted as the products of composite mass flows comprising a turbidity current, a gravelly hyperconcentrated flow and a mud-rich debris flow. All these characteristics suggest that the Lago Sofia conglomerate was formed in centripetally converging submarine channels, not in centrifugally diverging channels of submarine fans. The tributaries in the north were dominated by mass flows, probably affected by channel-bank failures or basin-marginal slope instability processes. In contrast, the trunk channel in the south was mostly filled by tractive processes, which resulted in the vertical and lateral accretion of gravel bars, deposition of gravel dunes and filling of scours and channels, similar to deposits of terrestrial gravel-bed rivers. The trunk channel developed along the axis of foredeep trough and its confinement within the trough is probably responsible for the thick, interconnected channel fills. The large-scale architecture of the trunk-channel fills shows an eastward offset stacking pattern, suggesting that the channel migrated eastwards most likely due to the uplift of the Andean Cordillera.

• The Korean Journal of Quaternary Research
• /
• v.7 no.1
• /
• pp.69-91
• /
• 1993

A total of 76 surface sediment samples, collected from the Korean west coast and the eastern Yellow Sea areas, were analyzed for their elemental composition in order to understand the geochemical characteristics of these deposits. The analyzed elements included 9 major elements (Al, Fe, Na, K, Mg, Ca, Ti, P, Mn), 8 minor elements (Sr, Ba, V, Cr, Co, Ni, Cu, Zn), organic carbon and calcium carbonate. Contents of most analyzed elements, excluding K and Ba, were generally low compared to those of average crust. Contents of most elements, except K and Ca, also correlated with sediment grain size, though the degree of relationship varied widely from one element to another. For fine-grained sediments, a distinction could be made between those in the central Yellow Sea and those in the Keum Estuary based on their characteristic elemental composition: the former were rich in Fe, Na, K, Mg, Ca and V, and the latter in Mn, Co and Ni. The element/aluminium ratios, on the other hand, showed that the central Yellow Sea muds were enriched in Fe, Mg, V, Ni, Cu and Zn and depleted in K, Mn, Ba and Sr relative to the mud located near the Korean Peninsula. Based on the analysis of these results, as well as of the influences of particular mineral phases or pollution effects, we could suggest geochemical criteria which can be used in distinguishing muds from the two different sources, the Keum River and the Yellow River: the former by the higher Mn content and the latter by the higher Mg and V contents, relative to each other.