• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.38-55
• /
• 2013

This study has been performed to select several indicators of long-range transport process that can be applied to the Northeast Asia. We first classified high air pollution days into long-range transport (LRT) dominant cases and the local emission dominant (LED) cases based on the synoptic meteorological variables including vorticity and geostrophic wind speed/direction at a geopotential level of 850 hPa. LRT cases were further categorized into two types: LRT-I type with air mass pathways from northern China and/or Mongolia, and LRT-II type from central and southern China. In each categorized case, we examined the difference of both measured aerosol optical properties of AERONET at two sites in western Korea, and the simulated characteristics of LRT process by MM5-CMAQ model. We contrasted LRT case with LED case, and then generated the LRT indicators applicable to Northeast Asia. The results showed that fine and coarse modes of LRT-II were relatively smaller than LED and LRT-I cases, respectively. Aerosol size distribution showed significantly higher concentration of fine-mode particle (mainly smoke or urban aerosols) in LED case in comparison with that of LRT groups (LRT-I, II), suggesting the amplitudes fine modes of LRT relative to LED as a possible LRT indicator. From the results of MM5-CMAQ modeling, we concluded that the conversion ratios for sulfur ($F_s$) were the most effective indicators of LRT cases, and the ratio of VOC to NOx and NOx to CO were found to be the second most effective indicators of LED case.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.269-273
• /
• 2015

The effect of adding Ca on the microstructural and mechanical properties of as-cast Mg-11Li-3Zn-1Sn(wt%) alloys were investigated. Mg-11Li-3Zn-1Sn-0.4Mn with different Ca additions (0.4, 0.8, 1.2 wt%) were cast under an $SF_6$ and $Co_2$ atmosphere at $720^{\circ}C$. The cast billets were homogenized at $400^{\circ}C$ for 12h and extruded at $200^{\circ}C$. The microstructural and mechanical properties were analyzed by OM, XRD, SEM, and tensile tests. The addition of Ca to the Mg-11Li-3Zn-1Sn-0.4Mn alloy resulted in the formation of $Ca_2Mg_6Zn_3$, MgSnCa intermetallic compound. By increasing Ca addition, the volume fraction and size of $Ca_2Mg_6Zn_3$ with needle shape were increased. This $Ca_2Mg_6Zn_3$ intermetallic compound was elongated to the extrusion direction and refined to fine particles due to severe deformation during hot extrusion. The elongation of the 0.8 wt% Ca containing alloy improved remarkably without reduction strength due to the formation of fine grain and $Ca_2Mg_6Zn_3$ intermetallic compounds by Ca addition. It is probable that fine and homogeneous $Ca_2Mg_6Zn_3$ intermetallic compounds played a significant role in the increase of mechanical properties.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.73-85
• /
• 2002

The purpose of this study was to develop prediction models for plant species abundance by stream restoration. Generally the stream plant is affected by stream gemophology. So in this study, the relationship between the vegetation abundance and stream gemophology was developed by multiple regression analysis. The stream characteristics utilized in this study were longitudinal slope, transectional slope, micro-landforms through the longitudinal direction, riparian width and geometric mean diameter and biggest diameter of bed material, and cumulated coarse and fine sand weight portion. The Pyungchang River with mountainous watershed and the Kyungan stream and the Bokha stream in the agricultural region were selected and vegetation species abundance and stream characteristics were documented from the site at 2~3km intervals from the upper stream to the lower. The Models for predicting the vegetation abundance were developed by multiple regression analysis using SPSS statistics package. The linear relationship between the dependant(species abundance) and independant(stream characteristics) variables was tested by a graphical method. Longitudinal and transectional slope had a nonlinear relationship with species abundance. In the next step, the independance between the independant variables was tested and the correlation between independant and dependant variables was tested by the Pearson bivariate correlation test. The selected independant variables were transectional slope, riparian width, and cumulated fine sand weight portion. From the multiple regression analysis, the $R^2$for the Pyungchang river, Kyungan stream, Bokga stream were 0.651, 0.512 and 0.240 respectively. The natural stream configuration in the Pyungchang river had the best result and the lower $R^2$for Kyunan and Bokha stream were due to human impact which disturbed the natural ecosystem. The lowest $R^2$for the Bokha stream was due to the shifting sandy bed. If the stream bed is fugitive, the prediction model may not be valid. Using the multiple regression models, the vegetation abundance could be predicted with stream characteristics such as, transection slope, riaparian width, cumulated fine sand weigth portion, after stream restoration.

• Applied Microscopy
• /
• 제26권1호
• /
• pp.79-93
• /
• 1996

The differentiation of nail matrix and fine structure of matrix cells were studied with light and electron microscope using specimens from nails of thumb finger in Korean fetuses 14 to 24 weeks old. Fetal nail matrix consisted of two horizontal layers, thicker ventral and thinner dorsal matrices, originating from invagination of epidermis in proximal nail field. Matrix being generally thicker in its distal region than the apex became gradually thickened with increase of the fetal age. Each matrix consisted of single layer of basal cells and multiple layers of squamous cells which are arranged close to and parallel to the central axis of the nail mairix. The process of keratinization of fetal nail matrix was noted to be occured concurrently in the ventral and dorsal matrices along the central axis of matrix toward distal and dorsal direction. Squamous cells became matured with accumulation of tonofilaments, increase of keratohyalin granules, discharge of membrane coating granules, and narrowing of intercellular spaces, thickening of plasma membrane and finally being transformed into horny cells of nail plate. Horny cells of nail plate filled with fibrous elements in the electron dense amorphous substance. These findings of keratinization process of fetal nail matrix appeared to be similar to those of keratinization in epidermis and inner root sheath of the hair. In the nail matrix, however, corresponding region to the keratogenous zone of growing hair follicle was not observed. Vacuolated squamous cells of nail matrix seen on light microscopy was considered to be artefactual product, but squamous cells with condensed small nuclei rarely found adjacent nail plate was considered to be one of the squamous cells with unknown function. Proximal end of nail plate was observed on dorsal surface of nail field distal to the proximal nail fold at 14 and 16 weeks old human embryos. Proximal prolongation of the proximal end of nail plate was occured with advancing fetal age and afterward 21 weeks nail plate invaded into nail matrix. Melanin granule containing cells and Merkel cells were present only on the basal layer of dorsal nail matirx.

• 한국콘텐츠학회논문지
• /
• 제22권6호
• /
• pp.1-14
• /
• 2022

본 연구는 미세먼지 관련 기사의 토픽을 추출하고 토픽별 특징 및 시계열 추이를 검토한다. 1990~2021년 중앙지의 기사를 빅카인즈에서 추출하였고, 잠재디리슐레할당 모델링을 이용하여 총 18개의 토픽을 발견하였다. 추가적으로 군집분석을 통해 유사한 토픽들을 병합하여 11개의 클러스터를 도출하였다. 최근 상승하는 토픽들로는 미세먼지 관련 제품/거주지, 국외 요인(중국), 국내 요인 중 발전소 관련 이슈, 전국의 비상조감조치, 국제협력, 관련 정치적 이슈, 세계 각국의 현황 및 대응, 관련 제품의 소비경향 논의로 나타났다. 반면 최근 하락하는 토픽들은 오염농도 기준, 실내 공기질 개선과 관련된 토픽으로 나타났다. 사회적으로 큰 관심사인 미세먼지의 언론보도 양상을 검토함으로써, 미세먼지와 관련한 정책방향과 대응전략을 추론하거나 파악하는 데 유용할 것이다. 미세먼지 관련 제품들의 시장규모가 확대됨에 따라 향후 실효적인 소비자보호정책을 확대하고, 근본적인 문제 해결을 위해 정치적 논쟁보다 국민의 건강과 안전을 목적으로 하는 정책 수립이 요구된다. 또한 국민 공감대와 국제사회 협력을 확대할 수 있는 정책수립이 필요한 것으로 판단된다.

• 대한금속재료학회지
• /
• 제47권3호
• /
• pp.147-154
• /
• 2009

The effect of carbon addition on the microstructures and mechanical properties of $Ni_3Al$ and TiAl intermetallic alloys have been characterized. It is shown that carbon is not only an efficient solid solution strengthener in $Ni_3Al$ and TiAl, it is also an efficient precipitation strengthener by fine dispersion of carbide. Transmission electron microscope investigation has been performed on the particle-dislocation interactions in $Ni_3Al$ and TiAl intermetallics containing various types of fine precipitates. In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide, which has the cube-cube orientation relationship with the matrix, appear during aging. Typical Orowan loops are formed in $Ni_3Al$ containing fine dispersions of $M_{23}C_6$ particles. In the L10-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction (SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ is and $[1120]_{Ti2AlC}//[101]_{L10\;matrix}$. High temperature strength of TiAl increases appreciably by the precipitation of fine carbide. Dislocations bypass the carbide needles at further higher temperatures.

• 한국염색가공학회지
• /
• 제8권6호
• /
• pp.1-8
• /
• 1996

The crystal structures of Nylon 6 films with the changes of pressure, temperature, and the processing time were examined. The accompanying physical property changes such as the weight fraction, the crystallinity, the crystal size, the initial modulus, and the thermal properties, gives the following results. When the sample is processed at 16$0^{\circ}C$, the weight fraction is not changed significantly with varying pressure. However, at 18$0^{\circ}C$ a significant change of the weight fraction was found with increasing pressure above 5 ton/in$^{2}$ so as to increase the crysallinity. As long as the ct transition is concerned we found that it begins from 14$0^{\circ}C$ and is completed at 18$0^{\circ}C$ and 9 ton/$in^{2}$ of pressure with the processing time of 120 min. The increase of the initial modulus is believed to be due to the increase of the number of the tie chains and the tension resulting from the change of the crystal size in the direction perpendicular to the direction of the applied pressure. The meltiong point change is due to the pressurized crystallization was not observed.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.52-58
• /
• 2007

A cutting device capable of generating various shapes of the cyclic elliptical trajectory of a cutting tool was proposed and micro v-grooving experiments were performed to investigate the characteristics of elliptical vibration cutting (EVC). The proposed cutting device is comprised of a pair of parallel piezoelectric actuators with which harmonic voltages of varying phase difference and magnitude are supplied, creating various shapes of the elliptical tool path. The attributes of the elliptical locus involving the direction of the axis of an ellipse, the rotational direction and amplitudes of a trajectory were fine-tuned for stable operation of the EVC. The EVC characteristics performed with brass and copper revealed reduction in the cutting resistance and suppression of burr formation, resulting in the enhancement of form accuracy of machined micro-features. While the effect of the EVC increases with the increase of excitation frequency and the amplitude, it is found that a change in the cutting force decreases as the amplitude of an elliptical locus increases.

• 자원환경지질
• /
• 제31권4호
• /
• pp.339-347
• /
• 1998

The purpose of this study is to find P-wave crustal velocity structure and the Moho characteristics beneath Seoul (SEO) and Inchon (INCN) stations using broadband teleseismic records. The use of broadband receiver function analysis is increasing to estimate the fine-scale velocity structure of the lithosphere. The broadband receiver functions are developed from teleseismic events of P waveforms recorded at Seoul (SEO) and Inchon (INCN) stations, and are analyzed to examine the crustal structure beneath the stations. The teleseismic receiver functions are inverted in the time domain of the vertical P wave velocity structures beneath the stations. The crustal velocity structures beneath the stations are estimated using the receiver function inversion method (Ammon et al., 1990). The general features of inversion results are as follows: (1) For the Seoul station, the Conrad and Moho discontinuities exist at 22 km and 30 km depth in the south ($BAZ=180^{\circ}$) direction. (2) For the Inchon station, the Conrad discontinuity exists at 22 km depth in the direction of SE ($BAZ=145^{\circ}$) and the Moho discontinuity exists at 30~34 km depth with a 4 km thick, which consists of a laminated velocity transition layers with thickness, whereas a crust-mantle boundary beneath the Seoul station consists of a more sharp boundary compared with the Moho shape of INCN station.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.133-143
• /
• 2010

Although past design developments that emphasized only the outer appearances of products were mostly concentrated on the areas of forms and colors in an attempt to satisfy humans' visual needs, it is expected that future designs to come will go in the direction to stimulate more diversified human senses. This means expansions to the five senses including the auditory sense, the sense of smell, the tactile sense and the taste and even to the area of synesthesia where two or more senses are stimulated or coexist. Although the dictionary definition of synesthesia is a concept of arousing another sense through a sense, studies of synesthesia in design go one step further from here to mean compound senses, that is, the synesthesia in an expanded meaning to feel an object (thing) through many sensory organs simultaneously. The synesthesia in the expanded meaning is applying multiple senses simultaneously in recognizing one thing to comprehensively judge and feel the thing. Recent design trends are going in a direction to basically satisfy humans' visual needs through controlled forms and colors while inducing another new feeling through expressions of diverse feels of materials within existing forms. In this change of the times, studies on furniture designs are conducted through factors of in synesthesia linked with other senses and have an important meaning that can enhance the value of designs.