• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.21-24
• /
• 2000

Ultra-fine grains were produced in pure Al using an Accumulative Rolling-Bonding (ARB) process. After several cycles of the ARB process, pure Al sheets were filled with the ultra-fine grains whose diameters were several hundred nano-meters. With ARB cycles, the nature of grain boundaries of the ultra-fine grains changed from diffusive sub-boundaries to well-defined high angle boundaries. After 7 cycles, ultra-fine polycrystals with large misorientations between neighboring grains were obtained. Sliding wear tests using a pin-on-disk type wear tester were co ducted on the ultra-fine grained pure Al. Wear rates of pure Al increased with the increase of ARB cycle numbers in spite of the increase in hardness. Worn surfaces and cross-sections were examined with optical microscopy (OM) and scanning electron microscopy (SEM) In investigate the wear mechanism of the ultra-fine grained pure Al.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.376-381
• /
• 2003

Microstructural evolution and dry sliding wear behavior of ultra-fine grained 5052 Al alloy obtained by an accumulative roll-bonding process have been investigated. After 7 ARB cycles, ultra-fine grains with a large misorientation between neighboring grains were obtained. The grain size was about 0.2 $\mu$m. The hardness, tensile and yield strengths of the ultra-fine grained alloy increased as the amount of accumulated strain increased with the ARB cycles. Sliding wear tests of the ultra-fine grained 5052 Al alloy were conducted at room temperature. Wear rate of the ultra-fine grained alloy increased in spite of the increase of hardness. Surface of the worn specimens were examined with SEM to investigate wear mechanism of the ultra-fine grained alloy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.40-41
• /
• 2019

Fine dust, which is emerging as a global problem, attracted much attention recently in Korea. One of the reasons is that recent factory relocation and expansion in China affected the increase of domestic fine dust concentration due to the influence of the Yangtze river battalion and westerlies. Fine dust is a big problem not only in outdoor but also indoors. The room requires periodic ventilation and is also essential for improving indoor air quality. The fine dusts are designated as Group 1 carcinogens in WHO and the risk of fine dusts on the human body due to respiratory diseases is also increasing. In this study, the characteristics of the fine dust adsorption matrix are examined and the actual application direction is derived.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.881-886
• /
• 2009

This paper presents a manipulation system consisting of a coarse/fine XY positioning system and an out-of-plane manipulator. The object of the system is to conduct tine positioning and manipulation of micro parts. The fine stage and the out-of-plane manipulator have compliant mechanisms with flexure hinges, which are driven by stack-type piezoelectric elements. In the fine stage, the compliant mechanism plays the roles of motion guide and displacement amplification. The out-of-plane manipulator contains three piezo-driven compliant mechanisms for large working range and fine resolution. For large displacement, the compliant mechanism is implemented by a two-step displacement amplification mechanism. The compliant mechanisms are manufactured by wire electro-discharge machining for flexure hinges. Experiments demonstrate that the developed system is applicable to a fine positioning and fine manipulation of micro parts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.77-78
• /
• 2011

This study is analysis of effect of binder types and replacement ratio on the properties of blast furnace slag mortar using the recycled fine aggregates. The results of the study were was follows. Compressive strength was increased according to an increase in replacement ratio of fine particle cement and gypsum. Absorption was reduced according to an increase in replacement ratio of fine particle cement and recycled aggregate fine powder.

• Computers and Concrete
• /
• v.16 no.2
• /
• pp.275-285
• /
• 2015

This paper reports the results of an experimental study on the compressive strength and the stress-strain curve (SSC) of recycled fine glass aggregate concrete with different replacement percentages of recycled fine glass aggregate. The results show that the recycled fine glass aggregate contents have significant impact on the workability, compressive strength, the elastic modulus, the peak and the ultimate strains of recycled fine glass aggregate concrete. Analytical expressions for the stress-strain relationship of recycled fine glass aggregate concrete are given, which can satisfactorily describe the effect of the recycled fine glass aggregate on the SSC.

• Journal of the Korean Society of Food Culture
• /
• v.33 no.6
• /
• pp.550-557
• /
• 2018

This study examined the effects of the service quality of fine dining restaurants on the service value and customer satisfaction by targeting 310 customers with experience in using fine dining restaurants in Seoul. The results of this study are as follows. First, the quality of the physical environment and interactions and the result of fine dining restaurants had positive (+) effects on the service value. Second, the quality of the physical environment and interactions and the result of fine dining restaurants had positive (+) effects on customer satisfaction. Third, the service value had positive (+) effects on customer satisfaction. According to the result of this study, when customers visit fine dining restaurants, evaluations of the service quality, such as interior design, kindness, accessibility, pleasant environment, and good quality of food, are very important elements. The service quality has been verified to be a very important factor when evaluating fine dining restaurants. Overall, the result of this study can be used to develop measures for improving the service quality.

• Journal of Platform Technology
• /
• v.8 no.4
• /
• pp.59-69
• /
• 2020

Recently, the seriousness of ultrafine dust and fine dust has emerged as a national disaster, but small and medium-sized cities in provincial areas lack fine dust monitoring stations compared to their area, making it difficult to manage fine dust. Although the computing resources for collecting and processing fine dust data are not large, it is necessary to utilize cloud and private and public data to share data. In this paper, we proposed a small edge computing system that can measure fine dust, ultrafine dust and temperature and humidity and process it to provide real-time control of fine dust and service to the public. Collecting fine dust data and using public and private data to service fine dust ratings is efficient to handle with edge computing using raspberry pie because the amount of data is not large and the processing load is not large. For the experiment, the experiment system was constructed using three sensors, raspberry pie and Thinkspeak, and the fine dust measurement was conducted in northern part of kyongbuk region. The results of the experiment confirmed the measured fine dust measurement results over time based on the GIS data of the private sector.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.92-111
• /
• 2021

As fine dust negatively affects disease, industry and economy, the people are sensitive to fine dust. Therefore, if the occurrence of fine dust can be predicted, countermeasures can be prepared in advance, which can be helpful for life and economy. Fine dust is affected by the weather and the degree of concentration of fine dust emission sources. The industrial sector has the largest amount of fine dust emissions, and in industrial complexes, factories emit a lot of fine dust as fine dust emission sources. This study targets regions with old industrial complexes in local cities. The purpose of this study is to explore the factors that cause fine dust and develop a predictive model that can predict the occurrence of fine dust. weather data and fine dust data were used, and variables that influence the generation of fine dust were extracted through multiple regression analysis. Based on the results of multiple regression analysis, a model with high predictive power was extracted by learning with a machine learning regression learner model. The performance of the model was confirmed using test data. As a result, the models with high predictive power were linear regression model, Gaussian process regression model, and support vector machine. The proportion of training data and predictive power were not proportional. In addition, the average value of the difference between the predicted value and the measured value was not large, but when the measured value was high, the predictive power was decreased. The results of this study can be developed as a more systematic and precise fine dust prediction service by combining meteorological data and urban big data through local government data hubs. Lastly, it will be an opportunity to promote the development of smart industrial complexes.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.3 s.21
• /
• pp.107-114
• /
• 2006

In this study, the experiment was carried out to investigate and analyze the engineering properties of concrete using fine aggregate of PS bal slagl. The main experimental variables were water/cement ratio 30, 40, 50(%), water content $170kg/m^3$, replacement ratio of slag fine aggregate 0, 25, 50, 75(%) in experiment I and water/cement ratio 30, 40, 50(%), water content 165, 170, 175($kg/m^3$), replacement ratio of fine aggregate of PS ball 0, 50 in experiment II. According to the test results, the principle conclusions are summarized as follows (1) The workability of slag fine aggregate-mixed concrete tends to improve, as the replacement rate increases. (2) The air content of slag fine aggregate-mixed concrete tends to decrease, as the replacement rate increases. (3) The unit volume weight of slag fine aggregate-mixed concrete tends to significantly increase, as the replacement rate increases. (4) The compressive strength of slag fine aggregate-mixed concrete tends to show more increasing propensity, in case the curing period is relatively long, as the replacement rate increases.