• 한국조경학회지
• /
• 제26권2호
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• 청정기술
• /
• 제15권3호
• /
• pp.194-201
• /
• 2009

최근 주요 수질오염 물질로 대두되고 있는 질산성 질소의 제거를 목적으로 영가 철 나노입자에 의한 질산성 질소의 환원반응성을 평가하였다. 영가 철 나노입자의 제조방법에 따른 반응성 차이를 규명하기 위해 유기용매 상에 계면활성제를 첨가하여 나노미터 크기 수준의 수용액 분산상에서 입자를 합성하는 마이크로에멀젼 방법과, 수용액 상의 철 이온을 환원시켜 입자를 합성하는 두 가지 방법으로 영가 철 나노입자를 합성하였다. 또한 전기영동법으로 알루미늄에 침적시킨 영가 철 나노입자에 의한 질산성 질소 제거속도를 측정하고, 고정화되지 않은 나노 철 입자에 의한 반응속도와 비교하였다. 환원반응을 질산성 질소에 대한 1차 반응으로 가정하여 수용액 방법 및 마이크로에멀전 방법으로 제조된 영가 철 나노입자의 반응성을 평가한 결과, 반응속도상수는 각각 $1.40{\times}10^{-2}min^{-1}$ 와 $3.49{\times}10^{-2}min^{-1}$ 로서 비표면적에 비례하여 증가하였다. 알루미늄에 침적된 나노입자는 현탁된 나노입자의 반응과 비교하여 약 30% 감소된 반응속도를 보였으나, 과량의 질산성 질소가 존재하는 경우 나노 철의 단위 질량당 질산성 질소의 제거효율 면에서 더 우수한 특성을 보였다. 나노철 입자의 현탁액은 반응시간 30분 이내에 반응속도가 감소하는 경향을 보였으나, 알루미늄에 침적된 나노철 입자는 3시간 이상 활성을 유지하였으며, 최종 생성물로 기체 질소를 발생시키는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.4019-4023
• /
• 2014

이 연구에서는 하수 처리 시 발생하는 잉여슬러지의 탈수성을 증대시켜 탈수 후 최종슬러지 케이크를 감소시키기 위해 초음파 적용 가능성을 검토하였다. 이번 연구에서 사용된 슬러지는 하수처리장에서 직접 채취한 탈수 전 잉여슬러지이며 여기에 초음파 조사시간과 조사강도를 달리 가하여 탈수성 변형특성을 고찰하였다. 실내외 실험을 동시에 수행하였으며 각각 용량이 다른 세 개(7리터, 1톤, 7톤)의 처리조를 제작 활용하였다. 초음파 처리 시간과 처리강도에 따라 탈수성 및 감량화 판단 인자로 사용되는 CST와 점도의 변화를 측정하였다. 연구결과 초음파 조사시간이 길어질수록 원 시료의 CST가 증가하는 경향을 보였으나 조사한 슬러지에 응집제를 첨가할 경우 도리어 초음파 강도와 조사시간에 따른 CST가 아주 낮게 최고점의 20%까지 측정되었다. 초음파에 의한 점도 변화는 최고점의 40%까지 감소하였다. 또한 원심력에 따른 슬러지의 침하를 분석하였는데 초음파를 가하고 응집제를 첨가한 슬러지의 초기 침하속도가 더 빠르며, 최종침하량에도 더 빨리 도달한 것으로 나타났다. 연구결과 초음파 조사시간과 초음파 강도가 탈수성에 큰 영향을 주는 것으로 나타났으며 연구결과를 현장에 도입할 경우 잉여슬러지의 탈수능 향상과 최종 탈수케이크 감량화에 유용하게 사용될 수 있을 것으로 기대된다. 가능성 평가를 위하여 대형 처리조를 처리장에 설치 운영하여 탈수케이크의 CST 및 함수율 변화를 고찰하였으며 실험실과 유사한 결과(최고 50% 감소)를 도출하였다.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.720-725
• /
• 1998

환원.확산법에 의해 $Sm_{2}Fe_{17}N_{x}$ 계 희토류 영구자석을 제조하기 위한 기초연구로서, 우선 $Sm_{2}Fe_{17}$ 금속간화합물의 제조를 위하여, 금속 Ca에 의한 $Sm_2O_3$의 환원반응과 Fe분말중에 Sm의 확산반응을 검토하였다. 그 결과 전자는 $1000^{\circ}C$이상의 고온의 경우에 매우 빠르게 완료되지만, 후자의 Fe분말의 중심까지 Sm의 확산반응의 완료(완전한 균질화조건)는 $1100^{\circ}C$에서 3h 정도의 R-D 반응이 필요하며, 이 확산반응이 전체반응에 있어서 율속단계임을 알았다. Sm-Fe 계의 금속간화합물들의 성장은$ 1000^{\circ}C$이하에서는 $SmFe_2$, $SmFe_3$,$Sm_{2}Fe_{17}$금속간화합물의 3개의 상이 관찰되었으나, $1100^{\circ}C$에서는 $Sm_{2}Fe_{17}$ 금속간화합물의 상만이 관찰되었다. 본 연구에서 얻어진 최종시료의 산소 및 Ca량은 각각 0.72wt% 및 0.11wt%이었다.

• Journal of Microbiology and Biotechnology
• /
• 제16권11호
• /
• pp.1690-1698
• /
• 2006

In order to investigate the effect of dissolved oxygen (DO) level on AVM $B_{1a}$ production by a high yielding mutant of Streptomyces avermitilis, five sets of bioreactor cultures were performed under variously controlled DO levels. Using an online computer control system, the agitation speed and aeration rate were automatically controlled in an adaptive manner, responding timely to the oxygen requirement of the producer microorganism. In the two cultures of DO limitation, the onset of AVM $B_{1a}$ biosynthesis was observed to casually coincide with the fermentation time when oxygen-limited conditions were overcome by the producing microorganism. In contrast, this phenomenon did not occur in the parallel fermentations with DO levels controlled at around 30% and 40% throughout the entire fermentation period, showing an almost growth-associated mode of AVM $B_{1a}$ production: AVM $B_{1a}$ biosynthesis under the environments of high DO levels started much earlier than the corresponding oxygen-limited cultures, leading to a significant enhancement of AVM $B_{1a}$ production during the exponential stage. Consequently, approximately 6-fold and 9-fold increases in the final AVM $B_{1a}$ production were obtained in 30% and 40% DO-controlled fermentations, respectively, especially when compared with the culture of severe DO limitation (the culture with 0% DO level during the exponential phase). The production yield ($Y_{p/x}$), volumetric production rate (Qp), and specific production rate (${\bar{q}}_p$) of the 40% DO-controlled culture were observed to be 14%, 15%, and 15% higher, respectively, than those of the parallel cultures that were performed under an excessive agitation speed (350 rpm) and aeration rate (1 vvm) to maintain sufficiently high DO levels throughout the entire fermentation period. These results suggest that high shear damage of the high-yielding strain due to an excessive agitation speed is the primary reason for the reduction of the AVM $B_{1a}$ biosynthetic capability of the producer. As for the cell growth, exponential growth patterns during the initial 3 days were observed in the fermentations of sufficient DO levels, whereas almost linear patterns of cell growth were observed in the other two cultures of DO limitation during the identical period, resulting in apparently lower amounts of DCW. These results led us to conclude that maintenance of optimum DO levels, but not too high to cause potential shear damage on the producer, was crucial not only for the cell growth, but also for the enhanced production of AVM $B_{1a}$ by the filamentous mycelial cells of Streptomyces avermitilis.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.347-354
• /
• 2014

본 연구에서는 연소 배가스 중에 포함된 이산화탄소의 탄산화 반응을 통한 고부가화합물 제조기술의 경제성평가를 수행하고 화합물 생산 계획에 따른 이익 및 내부수익률(Internal Rate of Return, IRR)을 분석하였다. 본 연구에서 고려된 기술을 이용하면 발전소에서 발생되는 연소배가스 중의 이산화탄소와 전기분해를 통해 발생되는 가성소다와의 탄산화 반응을 통해 고부가화합물(중탄산나트륨, $NaHCO_3$)의 생산 및 이산화탄소의 저감이 동시에 가능하다. 또한 전기분해에서 생산되는 염소 및 수소 가스는 다시 차아염소산나트륨(NaOCl) 및 고순도 염산의 제조에 적용된다. 기술의 경제성 평가를 위한 방법으로는 순현재가치법(Net Present Value method, NPV) 및 내부수익률(Internal Rate of Return, IRR)을 활용하여 일일 100톤의 이산화탄소를 처리할 수 있는 공정을 대상으로 20년간 상업운전을 가정하였다. 상기 가정하에서 20년간의 내부수익률은 약 67.2%, 20년간의 운전기간을 통한 총 이익은 순현가 기준으로 약 346,922 백만원으로 산출되었다. 그리고 2015년부터 시행예정인 탄소배출권 거래가 활성됨에 따른 ETS 수익을 고려할 경우 총이익은 약 60억원 향상되는 것으로 분석이 되었다. 상기 분석을 살펴보면 이산화탄소의 탄산화 반응을 통한 고부가화합물 제조기술은 온실가스 저감효과를 가져올 뿐만 아니라 경제성이 뛰어난 것으로 생각된다.

• Journal of Korean Neurosurgical Society
• /
• 제62권5호
• /
• pp.594-602
• /
• 2019

Objective : Although surgical intervention, such as percutaneous vertebroplasty (PVP), is the standard treatment for osteoporotic vertebral compression fractures (OVCFs), its effectiveness and safety are unclear. Therefore, this study compared the safety and efficacy of conservative treatment with that of PVP for acute OVCFs. Methods : Patients with single-level OVCFs who were treated conservatively with a transdermal fentanyl patch (TFP) or with PVP between March 2013 and December 2017 and followed-up for more than 1 year were retrospectively evaluated. Patients with pathologic fractures, fractures of more than two columns, or a history of PVP were excluded. Clinical outcomes (visual analog scale [VAS] scores) and radiographic factors were evaluated, including changes in the compression rate of the corresponding vertebral body at onset and after 12 months, sagittal Cobb angle at onset and after 6 and 12 months, and the incidence of adjacent compression fractures. Results : Of the 131 patients evaluated, 75 were treated conservatively using TFPs and 56 underwent PVP. We divided the patients into TFP and PVP groups. Their baseline characteristics (including sex, level of fracture, and bone mineral density T-scores) were similar, but the TFP group was significantly younger. The overall VAS score for pain showed a greater decrease during the first month (1 week after PVP) in the PVP group but remained similar in the two groups thereafter. The compression rate after 12 months increased in the TFP group but decreased in the PVP group. Five patients in the PVP group, but none in the TFP group, experienced adjacent compression fractures within 12 months. Conclusion : We compared clinical and radiological outcomes between the TFP and PVP groups. The immediate pain reduction effect was superior in the PVP group, but the final clinical outcome was similar. Although the PVP group had a better-preserved compression rate than the TFP group for 1 year, the development of adjacent fractures was significantly higher. Although TFPs seemed to be beneficial in reducing the failure rate of conservative treatment, the possibility of side effects (22.6%, 17 out of 75 patients, in this study) should be carefully monitored.

• 한국가구학회지
• /
• 제23권2호
• /
• pp.110-121
• /
• 2012

With people's recent increasing interest in good design products, wood and metal products have gained great popularity. However, it was believed that it would be necessary to have a transformation to the manufacturing method based on digital data and equipments from existing analog-based manufacturing method, in order to meet consumers' demand. This study was aimed to seek for the possibility of mass-producing wood and metal products through the research on the type, usage and development conditions of digital data and the methods of utilizing digital equipments. As for research methods, the study analyzed the concepts and types of digital data through various internet and literature reviews and suggested perpetual calendar products as the final outcome of design development using computer data. Through this, the study summarized and organized actual design development processes by stage to provide basic data that could become the foundation of research on the design of wood and metal products using digital data. Through the outcome of this project, the following effects could be expected by developing wood and metal products through digital data. First, its accurate and precise process would help mass-produce complex forms of products and reduce their defective rate. Second, the compatible production of various types of digital equipments would lead to a cost reduction. Third, the diversity of design could be pursued by overcoming technical limitations. In order to satisfy the above expectation effects, such as realization of developing and producing various wood and metal products, there should be designers' creative experimental spirits, their active information exchange and cooperation with the companies concerned.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.106-107
• /
• 2003

The effect of biological control agent Bacillus sp. (BAC03-3-1, BAC03-3-2, BAC02-4) on pre- and postemergence Sclerotinia rot of perilla (Perilla frutescens var. japonica) caused by Sclerotinia sclerotiorum was determined from greenhouse field trials. The ability of this antagonist to reduce germination of sclerotia of S. sclerotiorum was also evaluated. In the greenhouse, suspension of BAC03-3-1 application as root drench of perilla, which provided as little as 10$\^$7/ cells/ $m\ell$ per gram of soil, significantly increased plant stand in pathogen-infested soil over that in the untreated control. All three isolates reduced the germination of sclerotia of S. sclerotiorum in loamy sand soils in the greenhouse. In loamy sand amended with rice bran the sclerotial germination was inversely correlated (r = -0.79) with perilla stand in the greenhouse. However, a higher rate of bacterial suspension with rice bran(Ig dwt./100g soil) than that applied with bacterial suspensions only was necessary to achieve a comparable reduction in sclerotial germination. In field study, all three isolates added to soil to provide 10$\^$7/ cells/$m\ell$ per gram significantly prevented Sclerotinia rot (73-85％) after 35 days of growth. The isolate BAC02-4, BAC03-3-1 and BAC03-3-2 gave final stands of 65 to 75, 60 to 70, and 55 to 60％, respectively. The addition of rice bran(1 ％) to loamy sand in the field resulted in a 10-fold increase in propagule numbers of the three isolates within 10 days of application.

• 공업화학
• /
• 제2권1호
• /
• pp.38-46
• /
• 1991

탄소 침적과 황피독된 수소 첨가용 Ni 촉매의 재생에 관하여 연구하였다. 탄소 침적된 촉매를 수소로 재생할 경우, 재생율은 높았으나 재생 시간이 길었으며 침적된 탄소가 완전히 제거되지 않았다. 산소로 재생할 경우에는 재생시간이 단축되었고 대부분의 침적된 탄소를 제거시킬 수 있었으나 반드시 환원과정이 뒤따라야 한다는 문제점이 있었다. 황에 완전히 피독된 촉매를 수소와 수증기만으로 재생 처리할 경우 활성의 회복을 기대할 수 없었으나, 산소가 포함된 재생처리에는 $650^{\circ}C$에서 활성이 60 %까지 회복되었으며, HCl이 첨가된 경우에는 특히 저온에서 활성이 45 %정도까지 회복되었다. 수증기는 촉매의 소결현상을 촉진시키나, 산소 또는 염소는 소결억제 효과가 있는 것으로 나타났다.