• Multiscale and Multiphysics Mechanics
• /
• v.1 no.3
• /
• pp.261-270
• /
• 2016

The longitudinal velocity (forward speed) having significant importance in proper running of railway wheelset on track, depends greatly upon the adhesion ratio and creep analysis by implementation of suitable dynamic system on contamination. The wet track condition causes slip and slide of vehicle on railway tracking, whereas high speed may also increase slip and skidding to severe wear and deterioration of mechanical parts. The basic aim of this research is to design appropriate model aimed estimator that can be used to control railway vehicle forward velocity to avoid slip. For the filtration of disturbance procured during running of vehicle, the kalman filter is applied to estimate the actual signal on preferered samples of creep co-efficient for observing the applied attitude of noise. Thus error level is detected on higher and lower co-efficient of creep to analyze adhesion to avoid slip and sliding. The skidding is usually occurred due to higher forward speed owing to procured disturbance. This paper guides to minimize the noise and error based upon creep coefficient.

• Microbiology and Biotechnology Letters
• /
• v.28 no.4
• /
• pp.233-238
• /
• 2000

To develop biodegradable and safe flocculant, Achromobacter sp. HY-66 were isolated from soil. The purified flocculant was composed of fructose and glucose in an approximate molar ratio of 1:24. Molecular weight was approximately 9$\times$105 dalton by Sepharose CL-4B gel filtration chromatography. Elemental analysis revealed that the contents of carbon, hydrogen and oxygen were 37.72%, 5.37% and 56.89%, respectively. The presence of O-H stretching, C-H streching, carboxy ester and C-H bending were confirmed by IR absorption spectrum analysis. We suggest that a bioflocculant produced from Achromobacter sp. YJ-66 is new and different from other bioflocculants.

• Steel and Composite Structures
• /
• v.32 no.5
• /
• pp.643-655
• /
• 2019

Perforation and cutouts of structures are compulsory in some modern applications such as in heat exchangers, nuclear power plants, filtration and microeletromicanical system (MEMS). This perforation complicates dynamic analyses of these structures. Thus, this work tends to introduce semi-analytical model capable of investigating the dynamic performance of perforated beam structure under free and forced conditions, for the first time. Closed forms for the equivalent geometrical and material characteristics of the regular square perforated beam regular square, are presented. The governing dynamical equation of motion is derived based on Euler-Bernoulli kinematic displacement. Closed forms for resonant frequencies, corresponding Eigen-mode functions and forced vibration time responses are derived. The proposed analytical procedure is proved and compared with both analytical and numerical analyses and good agreement is noticed. Parametric studies are conducted to illustrate effects of filling ratio and the number of holes on the free vibration characteristic, and forced vibration response of perforated beams. The obtained results are supportive in mechanical design of large devices and small systems (MEMS) based on perforated structure.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.146.1-146.1
• /
• 2003

A major protein was isolated from ginseng root (Panax ginseng C.A. Meyer) using a combination of ammonium sulfate fractionation, gel filtration chromatography, ion-exchange FPLC. Electrophoretic and gel permeation chromatographic studies revealed that the major protein, GMP, is composed of two subunits of approximately 28 kDa. In this, investigated the ability of GMP to inhibit the oxidation of low-density lipoprotein (LDL). GMP inhibited $Cu^{2+}$ (5$\mu$M)-promoted oxidation of LDL (125$\mu$g protein/mL) in a dose-dependent mamer (0~5 $\mu$M), with a maximal inhibitor at GMP/copper ratio of 1:10 and an $IC_{50}$ value of 0.2 $\mu$M, as determined by measurement TBARS. (omitted)

• Archives of Metallurgy and Materials
• /
• v.66 no.4
• /
• pp.1023-1027
• /
• 2021

This study investigated the effect of flux type and amounts on recovery behavior of aluminum alloy during the melting process of Al can scrap. The heat treatment was conducted to remove the coating layer on the surface of can scrap at 500℃ for 30 min. The molten metal treatment of the scrap was performed at 750℃ in a high-frequency induction furnace with different flux types and amounts. It was observed that the optimum condition for recovery of Al alloy was to add about 3 wt.% flux with a salt and MgCl₂ mixing ratio of 70:30 during melting process. The mechanical properties of recovered Al alloy were about 254.8 MPa, which is similar to that of the virgin Al5083 alloy.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.83-105
• /
• 2003

Geochemical studies on the alluvial aquifer system near the Nakdong River were carried out for the basic investigation of the estimation of artificial recharge for the river bank filtration. In-situ data do not show any distinct difference between the pumping well and river. Most of waters belong to $_3$ and Ca-$SO_4$ types and show high Mn concentration. In the borehole installed with Multi-Ca-HCOPacker (MP) system, Na, Ca, Mg, $HCO_3$ contents of the groundwater are increased with depth increasing. Cl and $SO_4$ contents of the groundwater show the lowest values at the bottom level (18m depth) and Mn content is very high at the middle level (13.5 m depth) of MP system. There is no distinct difference in the ${\delta}^{18}O$ and D values and tritium content between MP, borehole and surface water samples. The sulfur isotope data indicate that the possible sulfur source is dissolution of sulfate mineral from sedimentary rock. Strontium isotope ratio shows a little differences between the pumping well and observation borehole samples. Nitrogen isotope data indicate that the nitrogen of water samples is originated from fertilizer or organic materials.

• Clean Technology
• /
• v.5 no.2
• /
• pp.25-35
• /
• 1999

Behavior of permeate flux decline was examined through the hollow fiber membrane in ultrafiltration system for Si colloidal solution. Flux decline with time was due to the growth of Si cake deposited on the membrane surface and the pore blocking by Si particles for the hollow fiber membrane. At the pseudo steady state of operation, the permeate flux of dead-end flow was 60 % to that of the cross flow. The ratio of permeate flux to the pure water flux, $J/J_w$, decreased with increasing the trans-membrane pressure, from 64.2 % for $0.5kg_f/cm^2$ to 45.7 % for $2.0kg_f/cm^2$. When the feed flow rate was 3 L/min, the pore blocking model was dominant at the initial period of filtration and was followed by the cake filtration model. And with increasing the feed flow rate from 1 L/min to 3 L/min, $R_c$ was $1.79{\times}10^{12}{\sim}2.34{\times}10^{12}m^{-1}$ which was the about 40 % decreased value to that of the 1 L/min while $R_p$ was not changed and was $1.71{\times}10^{12}m^{-1}$ approximately.

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.423-429
• /
• 2008

Microfiltration (MF) and ultrafiltration (UF) processes for removal of particulate materials (i.e., turbidity, microorganisms and viruses) have been used to produce drinking water with higher quality. As membrane filtration technique has become widely applied for drinking water treatment, the importance of membrane integrity test (MIT) has also been increasingly emphasized. The results of pressure decay test (PDT) were presented in the paper to monitor membrane integrity. In this paper the PDT was carried out with deliberately-defected membrane fibers to evaluate the sensitivity of PDT on membrane fiber damage. Variation of pressure decay rate and removal rate were investigated to evaluate the impact of defection (defection ratio) and pore size of membrane. The membrane integrity could be successfully monitored by the PDT. The pressure decay rate varied from $0.002{\sim}0.189kg_f/cm^2hr$ with the initial pressure ranged from 0.2 to $1.0kg_f/cm^2hr$. Higher initial pressure which provided with higher pressure decay rate was preferred to evaluate the defection of membrane fiber. As for the particle removal rate, the Log Removal Rate (LRV) of kaolin solution decreased significantly from 3.78 to 2.31 when one fiber out of 3,200 fibers was cut. The membranes with different pore size were tested to evaluate virus removal efficiency. The virus removal rate of the MF membrane ($0.1{\mu}m$) was about 30% although the poliovirus was smaller than the pore size of the MF membrane, indicating that the removal rate was much lower than Korea Water Works Association (KWWA) certificate LRV of 1.5.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.639-643
• /
• 2002

Water quality, bacterial phase and fish growth rate were analyzed in the process of artificial seed production of flounder (Paralichtys oliraceus) larvae to investigate the water quality in rearing tank using Ultra Filtration System (UES). Sand Filtration System (SFS) and Ultra Filtration System (Ins) were set up in the experimental group. For the analysis of water quality, pH, salinity, DO, SS, COD, $NH_{4}^{+},\;NO_{2}^{-},\;NO^-,\;DIN$ (dissolved inorganic nitrogen) and DU (dissolved inorganic phosphate) were measured. There was no data difference between SFS group and UES group in most analysis items, but the UEs group showed low salinity and low 55 values, such that salinity was $33.5\%_{\circ}$ in SES group and $30.2\%_{\circ}$ in WS group and 55 was 15.5 mL/L in SES group and 7.0 mL/L for UPS group. For changes in bacterial phase and TBC (Total Bacterial Counts), in SES group, 6$\times$10^{5}CFU/mL in seawater decreased to the ratio of about 116, and TBC, Genus Vibrio and bacteria in the Genus Acinetobacter and Genus Micrococcus sharply increased after nine days, while stable bacterial phase was maintained low in UES group during the experiment except for Genus Ajteromonas. In the growth of the larvae, fish length was 17.0 mm (SGR 14.0) in the SES group and 18.8 mm (SGR 14.3) in the UFS group. It is concluded that when water is supplied for artificial seed production with WS, stabilization of water quality condition and inhibition of bacterial multiplication are possible. When production environment becomes stable, stable growth of fish becomes possible by reduction of environmental stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.9-17
• /
• 2016

A purification method was established for high-purity chondroitin sulfate from skate cartilage. Hydrolytic extraction of skate backbone cartilage was investigated with the proteases alcalase and protamex, and the extraction contents of chondroitin sulfate were measured with several physicochemical processes. The yield of extract from skate cartilage with $40^{\circ}Brix$ concentration was 23.3% with 2% alcalase hydrolysis, which was decreased to 8.47% and 3.37% with the first and second additional ethanol purifications, respectively. The yield was 16.62% with one ethanol purification after hydrolysis with a mixture of 1% alcalase and 1% protamex. The content of chondroitin sulfate was measured as 39.88-45.08% with different ratios of ethanol solvent. The content was 42.92% at a solvent ratio of 1:1 with alcalase protease and 45.08% with a ratio of 1:2 using a protease mixture of alcalase and protamex. The molecular weight range of chondroitin sulfate was about 110-310 thousand Da, and the purity of chondroitin sulfate was 24.87-49.92% with a mixture of alcalase and protamex in GPC analysis. The maximum purity of chondroitin sulfate was 53.93% after ultrafiltration. The odor strength of chondroitin sulfate was decreased by 33% and 38% after ethanol purification and additional filtration with activated carbon, respectively. The odor concentration of ammonia and TMA from chondroitin sulfate was decreased by 52.1% and 37.89% with activated carbon filtration and two ethanol purifications, respectively, but it was necessary to eliminate the odor components efficiently using additional physicochemical processes.