• 전기학회논문지P
• /
• 제58권3호
• /
• pp.316-322
• /
• 2009

This paper presents an analytical design method of a passive harmonic filter for a three-phase diode rectifier and uses a new transfer function approach in the analysis and design. The transfer function approach derives an analytical formulation of an utility system including passive filters with a basis of Laplace transform and provides a graphical formulation so that a visualized insight into an interaction between individual filter and system response can be attainted. Harmonic impedance, voltage division and current division transfer function are used as a design tool, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. A simple five-step design procedure is introduced in the filter design, which consists of system analysis, selection of PCC(Point of Common Coupling), filter specification calculation, appropriate filter design for system and filter implementation. Philosophy governing the design procedure is based on a numerical/graphical iterative solution, trial and error with visualization feed-back based on "algebra on the graph". Finally, performance of the designed passive harmonic filter is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th harmonics are decreased within IEEE-519 distortion limits, respectively.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.623-630
• /
• 2009

This paper proposes a filter design guideline for grid-connected single-phase inverters. By analyzing the instantaneous voltage applied to the filter inductor, the switching ripple current through the filter inductor can be precisely calculated. Therefore, filter inductance can be designed accurately, which guaranties that the switching ripple current will be under the target value. The proposed filter design method is verified by experiment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.115-121
• /
• 2002

This paper presents an evolutionary design of digital IIR filters using the genetic algorithm (GA) with modified genetic operators and real-valued encoding. Conventional digital IIR filter design methods involve algebraic transformations of the transfer function of an analog low-pass filter (LPF) that satisfies prescribed filter specifications. Other types of frequency-selective digital fillers as high-pass (HPF), band-pass (BPF), and band-stop (BSF) filters are obtained by appropriate transformations of a prototype low-pass filter. In the GA-based digital IIR filter design scheme, filter coefficients are represented as a set of real-valued genes in a chromosome. Each chromosome represents the structure and weights of an individual filter. GA directly finds the coefficients of the desired filter transfer function through genetic search fur given filter specifications of minimum filter order. Crossover and mutation operators are selected to ensure the stability of resulting IIR filters. Other types of filters can be found independently from the filter specifications, not from algebraic transformations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.315-318
• /
• 1999

The purpose of this study is to establish the design theory of a DR ceramic bandpass filter used for WLL basestations and to research on the design theory of bandpass filter. The design procedure is circuit parameters and structural parameters will be derived. It was observed that the filter characteristics at the simulations

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.371-375
• /
• 2003

In this paper, a new design method for coupled-line filters with tapped input/output has been developed. The design equations for this tapped filter have been obtained using a new equivalent circuit model of tapped lines. From an edge coupled-line filter, tapped lines replaces the input/output coupled lines which tend to have very narrow gaps (few mils). Therefore, tapped coupled-line filters tend to be less sensitive to filter fabrication tolerances and to be easily fabricated using milling tools. The new filter design algorithm allows very accurate filter design for frequencies less than 20 GHz and bandwidth less than 20%. Above 20 GHz, the filter performance can be optimized starting from the filter design algorithm in this paper. Simulation problems with 2-D EM tools to characterize filter performance at high frequencies have shown to be solved by providing a channel for the filter to eliminate higher order modes.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.117-123
• /
• 2005

LC출력필터는 동적전압보상기(DVR)의 인버터 스위칭에 따른 전압리플을 억제하는 반면에, 전압제어 밴드폭에 제한을 가져온다. 이러한 두 조건을 만족시키기 위한 LC출력펄터의 컷오프 주파수 설계에 대하여는 지금까지 많은 연구가 이루어져 왔다. 그러나 적절히 설계 되어진 필터의 컷오프 주파수에 대하여 무한히 많은 수의 L-C 조합이 가능하며 그에 따라 서로 다른 특성이 나타나지만, 지금까지 분명한 해석적인 기초가 없이 현장의 경험에 의존한 설계를 하여 왔다. 본 논문은 DVR의 크기를 최소화 하면서 우수한 제어성능을 유지할 수 있는 LC출력필터의 설계 방법을 제안한다. 제안된 LC출력필터의 설계에 기초한 DVR 시스템을 구성하여 실험에 의하여 이론을 증명한다.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.538-541
• /
• 2016

This paper proposes an LCL-filter design for space vector pulse width modulation (SVM) in grid-connected three-phase inverter systems. Although there are a several studies in progress, the existing methods are erroneous because they do not focus on the other switching methods. This paper presents the design methodology for an LCL-filter that is optimized for SVM switching operations. The design procedure for the LCL-filter is presented step-by-step. The inverter-side inductor was determined by an analysis of the ripple components, mathematically. Based on the reactive power absorption ratio, the filter capacitor was determined. The grid-side inductor was determined by the ripple attenuation factor of the output current. Experimental results verify the validity of the design method for the LCL-filter.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.727-732
• /
• 2008

In this paper, the state-space representation of generalized complimentary filter is proposed. Complementary filter has the suitable structure to merge information from sensors whose frequency regions are complementary. First, the basic concept and structure of complementary filter is introduced. And then the structure of the generalized filter and its state-space representation are proposed. The state-space representation of complementary filter is able to design the complementary filter by applying modern filtering techniques like Kalman filter and $H_{\infty}$ filter. To show the usability of the proposed state-space representation, the design of Inertial Navigation System(INS) vertical channel damping loop using Global Positioning System(GPS) is described. The proposed GPS/INS damping loop lends the structure of Baro/INS(Barometer/INS) vertical channel damping loop that is an application of complementary filter. GPS altitude error has the non-stationary statistics although GPS offers navigation information which is insensitive to time and place. Therefore, $H_{\infty}$ filtering technique is selected for adding robustness to the loop. First, the state-space representation of GPS/INS damping loop is acquired. And next the weighted $H_{\infty}$ norm proposed in order to suitably consider characteristics of sensor errors is used for getting filter gains. Simulation results show that the proposed filter provides better performance than the conventional vertical channel loop design schemes even when error statistics are unknown.

• 정보처리학회논문지B
• /
• 제12B권4호
• /
• pp.379-386
• /
• 2005

본 논문은 다차원 서브밴드 필터 뱅크에서 양자화 효과에 대한 분석과 그에 따른 최적의 필터 설계 방법에 대한 이론을 제안한다. 기존의 서브밴드 필터뱅크에 대한 연구에서 양자화 과정에 대한 고려는 매우 미미하였다. 본 연구에서는 확률 밀도에 최적화된 양자화기가 이득에 무상관성 잡음이 더하여진 비선형 형태로 모델링 되어 서브밴드 구조에 결합된다. 분석/합성 필터 뱅크에 다위상 분리 방법을 적용하여 양자화 과정에 의한 출력에서의 MSE가 유도되며 이 에러의 최소화 과정을 통하여 최적의 필터 설계 방법이 개발된다. 또한 5점형 구조의 표본화 격자를 이용한 최적의 비분리 파라유니터리와 이중직교 필터의 설계와 이를 이용한 영상 데이터의 압축 및 복원 과정을 통하여 성능 분석을 한다. 시뮬레이션 결과 제안한 설계방법에 따른 필터가 기존의 단순한 PR 서브밴드 필터보다 영상의 압축 및 복원에서 10에서 20퍼센트 정도의 MSE 감소를 보여주었고 낮은 비트율에서 특히 우수한 성능을 나타내었다.

• 한국융합학회논문지
• /
• 제4권4호
• /
• pp.41-48
• /
• 2013

Observer design for system with unknown input was carried out. First, Kalman filter was considered to estimate system state with White noise. With the results of Kalman filter design, state observer, controller properties, including controllability and observability, and the Kalman filter structure and algorithm were also studied. Kalman filter algorithm was applied to Position and velocity measurement based on Kalman filter with white noise, and it was constructed and achieved by programming based on Matlab programming. Finally, observer for system with unknown input was constructed with the help of Gershgorin's disc theorem. With the designed observer, system states was constructed and applied to system with unknown input. By simulation results, estimation performance was verified. In this project, state feedback control theory, observer theory and relevant design procedure, as well as Kalman filter design were understood and used in practical application.