• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.975-980
• /
• 2003

The electrochemical properties and the mechanism of formation of anodic oxide films on Mg alloys containing 0-15 mass% Al, when anodized in NaOH solution, were investigated by focusing on the effects of anodizing potential, Al content, and anodizing time. The intensity ratio of Mg(OH)₂ in the XRD analysis decreased with increasing applied potential, while that of MgO increased. Mg(OH)₂ was barely detected at 80 V, while MgO was readily detected. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. The intensity ratio of the β phase increased with aluminum content in Mg-Al alloys. During anodizing, the active dissolution reaction occurred preferentially in β phase until about 4 min, and then the current density increased gradually until 7 min. The dissolution reaction progressed in α phase, which had a lower Al content. In the anodic polarization test in 0.017 mol·$dm^{-3}$ NaCl and 0.1 mol·$dm^{-3}$ Na₂SO₄ at 298 K, the current density of Mg-15 mass% Al alloy anodized for 10 min increased, since the anodic film that forms on the α phase is a non-compacted film. The anodic film on the α phase at 30 min was a compact film as compared with that at 10 min.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.571-574
• /
• 2003

The thin films fabricated by using the layer-by-layer sputtering was compared with the thin film fabricated by using the evaporation method. Re-evaporation in the form of Bi atoms or $Bi_2O_3$ molecules easily bring out the deficiency of Bi atoms in thin film due to the long sputtering time of the layer-by-layer deposition. On the other hand, the respective atom numbers corresponding to BiSrCaCuO phase is concurrently supplied on the film surface in the evaporation deposition process and leads to BiSrCaCuO phase formation. Also, it is cofirmed that by optimizing the deposition condition, each single phase of the Bi2201 phase and the Bi2212 phase can be fabricated, the sticking coefficient of Bi element is clearly related to the changing of substrate temperature and the formation of the Bi2212 phase.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.381-386
• /
• 2018

In this study, plasma electrolytic oxidation (PEO) method was used to from anodic oxide films on Al alloy and their resistance and morphological characteristics were investigated as a function of film formation voltage and treatment time. Cross-sectional morphology and composition of the PEO films were analyzed by SEM (Scanning Electron Microscopy) and EDS (Energy Dispersive Spectroscopy). The PEO films showed increased surface roughness and thickness with of film formation voltage and treatment time. The wear resistance was found to be the best for the PEO film formed for 5 min at 500V which is attributed to be denser structure relatively and lower surface roughness.

• 한국표면공학회지
• /
• 제57권2호
• /
• pp.86-91
• /
• 2024

In this study, we investigated the effect of Na₂SiO₃ concentration on the Plasma Electrolytic Oxidation(PEO) film formation of Al6061 alloy. The morphology of the PEO films were examined by Optical Microscope(OM) and Scanning Electron Microscope(SEM). PEO film thickness increases as the Na₂SiO₃ concentration increases. The elemental analysis of PEO films was conducted using Dispersive X-ray Spectrometer(EDS). The cross-sectional elemental analysis result shows that the Si concentration tends to increase as the concentration of Na₂SiO₃ increases. X-Ray Diffraction(XRD) analysis was performed to confirm the degree of phase change according to Na₂SiO₃ concentration. In addition, Vickers hardness was measured to confirm the mechanical strength of the PEO film. As the concentration of Na₂SiO₃ increases, the hardness value also tends to increase.

• 공업화학
• /
• 제9권7호
• /
• pp.998-1003
• /
• 1998

$85^{\circ}C$, 0.4 M $Ba(OH)_2$용액내에서 펄스전류파형을 이용하여 Ti전극위에 $BaTiO_3$박막을 전해 합성하였다. 환원전류 밀도 및 환원시간이 증가함에 따라 $BaTiO_3$의 결정성 및 페러데이 효율이 증가하였으며, 이는 표면 및 전기화학적특성 분석에 의하면 환원 전류 인가시에 $H_2O$의 환원에 의하여 전극표면의 pH가 증가함으로서 산화전류에 의하여 형성된 산화막의 구조변화가 빠르게 진행되기 때문으로 추측된다. 그리고 0.1M $H_2SO_4$용액하에서 산화막을 형성시킨 후 $BaTiO_3$형성에 미치는 영향을 분석한 결과, 산화막 두께가 증가함에 따라서 산화막을 통한 $Ti^{+4}$이온의 이동이 어려워지면서 $BaTiO_3$형성이 억제되며, 일정두께이상에서는 산화막 결함부위에서 결정이 형성됨을 알 수 있었다.

• 공업화학
• /
• 제25권6호
• /
• pp.598-601
• /
• 2014

Polypropylene의 농도와 코팅 막의 건조 온도 및 나노실리카의 첨가량의 변화 등 polypropylene 박막 제조를 위한 공정 변수들이 박막의 표면 형상 및 특성에 미치는 영향을 연구하였다. Polypropylene의 농도가 30 mg/mL인 경우에 $30^{\circ}C$의 건조 온도로 90 min 동안 93 mTorr의 진공 조건으로 최대 접촉각 $154^{\circ}$를 갖는 초소수성 polypropylene 박막을 얻을 수 있었다. 용매 휘발을 위한 진공 오븐에서의 건조 온도가 증가함에 따라 박막의 거칠기가 감소하여 접촉각이 낮아지는 효과를 가져왔다. Polypropylene-실리카 복합막은 박막 내에 나노실리카의 함유량의 증가에 따라 박막 표면이 미세 다공성 구조에서 미세 구형 구조물로 변환되면서 접촉각의 증가로 초소수성 표면 특성을 보였다.

• 한국미생물·생명공학회지
• /
• 제24권5호
• /
• pp.546-552
• /
• 1996

The applicability of chitosan, a biodegradable natural polymer, as the coating material to prevent the dispersal of the spores of the apple white rot agent Botryosphaeria dothidea, was investigated. The physical properties of mixed chitosan/polyvinyl alcohol(PVA) film showed the increased physical properties for film formation, such as tensil strength, elongation, and viscosity, compared to either chitosan or PVA film. The FT-IR spectra of chitosan/PVA film indicated that the film was formed by simple blending not by any new synthetic bond. The chitosan and chitosan/PVA film showed effective antifungal activity on B. dothidea. The formed films were well decomposed by ASTM strains used for biodegradability test, on the other hand, the PVA film could not be decomposed by above standard strains. The field test at apple orchard showed that the dispersal of B. dothidea spores could be effectively reduced by coated film, especially by chitosan/PVA film. The spore dispersal was reduced upto 97.0% by 1.0% chitosan/5.0% PVA film during 4 months.

• 동굴
• /
• 제75호
• /
• pp.49-54
• /
• 2006

Electrophoretic Deposition (EPD) is the most convenient technology to deposit natural or oxide powders of nonconductive materials in alcoholic suspension solution with adding electrolyte of iodine to form ceramic thick film on metal substrate under applied electric field with double electric layer between electrode and metal substrate. In this research work, the important parameters and technical ways were studied to form EPD thick films of typical oxide ceramics of Al2O3, YBCO and tourmaline powders.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.293-293
• /
• 2006

Self-assembled nanostructures of block copolymer thin films have gathered significant attention due to their potential applications as templates for nanofabrication. However the lack of a robust strategy to control the structure formation in thin film geometries has been considered a major obstacle for the practical application. In this presentation 'epitaxial self-assembly' will be introduced as a successful strategy to control the self-assembled nanostructure of block copolymer. Chemically patterned surfaces prepared by advanced lithographic techniques successfully registered nanodomains in block copolymer thin film without any single defect over an arbitrarily large area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.826-828
• /
• 2003

With a new PDP transparent dielectric layer formation technique, we were able to make dielectric layer with high transmittance by using dry film type dielectric material. We optimized dielectric pastes for dry film and they showed good process properties in lamination , drying and firing.