• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.175-179
• /
• 1979

One of the major problems in tile activated sludge system has been difficulty in separating the microbial solids from the treated effluent and in returning them to the aeration tank. Another problem has been the digestion of the excess activated sludge. In constrast, it has not been difficult to separate the microbial solids from the treated effluent from the biological fixed-film systems(RBC process, Trickling Filter, FAST process). These systems have also featured less sludge production. Recently, it was proposed to experiment with the RESMAS process in order to eliminate the settling tank and sludge concentration facilities and to reduce the quantity of excess sludge for final disposal. The effluent quality could be predicted by .the concept of the maximum accumulation capacity. However, the hydraulic characteristics of the screen media in the RESMAS reactor were not dynamic. The object of the present study is to evalute the sludge accumulation rate and effluent quality prediction in the REMSMAS process designed in the dynamic hydraulic structure. This process can eliminate the final sedimentation tank and sludge concentration tank needed in the RBC, CMAS, Trickling Filter and FAST processes. Also, the effluent quality is desirable to compare with other processes. It appeared that the value of the sludge holding capacity was higher than those of the RESMAS and FAST processes, and the periods of the critical operating time were proportional to the substrate hydraulic loadings.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.616-625
• /
• 2017

Measurements using five real-time particle samplers were compared to measurements using three NRM (National Reference Method system) filter-based samplers(Gravimetric method) at Incheon, Korea, between May and August, 2014. The purpose of this study was to suggest the quality assurance/quality control (QA/QC) method of each instrument for use in a real-time continuous particle sampler to measure the mass of airborne particles with an aerodynamic diameter less than $2.5{\mu}m$ ($PM_{2.5}$). Five real-time particle samplers of BAM1020, FH62C_14, TEOM, PM-711 and SPM-613 were evaluated by comparing its measured 23 hr average $PM_{2.5}$ concentrations with those measured with NRM filter-based samplers simultaneously. The parameters(e.g. Inlet heating condition, Slope factor, Film response, Intercept, Background, Span value) of the real-time samplers were optimized respectively by conducting test performance evaluation during 7 days in field sampling. For example, inlet heating temperature of TEOM sampler controls $35{\sim}40^{\circ}C$ to minimize the fluctuation of the real-time measurement data and background value of BAM1020 is the key factor affecting the accuracy of $PM_{2.5}$ mass concentration. We classified the $PM_{2.5}$ concentration according to relative humidity (80%) to identify water absorbed in aerosols by measuring the ${\beta}$-ray samplers(BAM1020, FH62C_14) and TEOM. ${\beta}$-ray samplers were not strongly affected by relative humidity that the difference of the average $PM_{2.5}$ concentration was about 5%. On the other hand, The TEOM sampler overestimated $PM_{2.5}$ mass concentration about 15% at low relative humidity (<80%).

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.692-702
• /
• 2009

Real-time virtual studios which could run only on expensive workstations are now available for personal computers thanks to the recent development of graphics hardware. Nevertheless, graphics are rendered off-line in the post production stage in film or TV drama productions, because the graphics' quality is still restricted by the real-time hardware. Software-based camera tracking methods taking only the source video into account take much computation time, and often shows unstable results. To overcome this restriction, we propose a system that stores camera motion data from sensors at shooting time as common virtual studios and uses them in the post production stage, named as POVIS(post virtual imaging system). For seamless registration of graphics onto the camera video, precise zoom lens calibration must precede the post production. A practical method using only two planar patterns is used in this work. We present a method to reduce the camera sensor's error due to the mechanical mismatch, using the Kalman filter. POVIS was successfully used to track the camera in a documentary production and saved much of the processing time, while conventional methods failed due to lack of features to track.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.8
• /
• pp.754-760
• /
• 2010

Geosmin removal by biodegradation was investigated in lab-scale slow sand filtration column with different empty bed contact times (EBCTs) and water temperature. Schmutzdecke layer was built up after 30 days operation and biomass and activity were $4.5{\times}10^6\;CFU/g$ and $3.42\;mg{\cdot}C/m^3{\cdot}hr$, respectively. The attached bio-film microorganisms in schmutzdecke layer were isolated and identified. The dominant species was Pseudomonas sp. that had occupied 56%. Removal efficiencies of dissolved organic carbon (DOC) and geosmin were 27% and 95% after 30 days operation. In lab-scale slow sand filtration column, geosmin and DOC removal efficiencies were 62% and 10% at $5^{\circ}C$, respectively. And increasing water temperature ($15^{\circ}C$ and $25^{\circ}C$) increased the geosmin and DOC removal efficiencies (88~100% and 25~42%) in lab-scale slow sand filtration column. Geosmin and DOC biodegradation rates (k) in the schmutzdecke layer (in the upper 5 cm filter bed) were $1.842{\sim}15.965\;hr^{-1}$1 and $0.253{\sim}1.123\;hr^{-1}$, respectively. It were about 18~32 times and 20~51 times of the rates in the deeper filter bed (5~60 cm).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.27-33
• /
• 2023

Countries around the world are calling for stronger law enforcement to combat the production and distribution of child sexual exploitation images, such as child grooming. Given the scale and importance of this social problem, it requires extensive cooperation between law enforcement, government, industry, and government organizations. In the wake of the Nth Room Case, there have been some amendments to the Enforcement Decree of the Telecommunications Business Act regarding additional telecommunications services provided by precautionary operators in Korea. While Naver and others in Korea use Electronics and Telecommunications Research Institute's own technology to filter illegal images, Microsoft uses its own PhotoDNA technology. Microsoft's PhotoDNA is so good at comparing and identifying illegal images that major global operators such as Twitter are using it to detect and filter images. In order to meet the Korean government's testing standards, Microsoft has conducted more than 16 performance tests on "PhotoDNA for Video 2.0A," which is being applied to the Bing service, in cooperation with the Korea Communications Commission and Telecommunications Technology Association. In this paper, we analyze the cases that did not pass the standards and derive improvement measures related to adding logos. In addition, we propose to use three video datasets for the performance test of filtering against illegal videos.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.151-156
• /
• 2003

This study was performed to develop a useful nerve conduit which provides favorable environment for Schwann cell viability and proliferation. Milipore membrane of $0.45{\mu}m$ pore size was selected because it permits nutritional inflow from the outside of the conduit and prevents from invading the fibrotic tissue into the conduit. The membrane was rolled and sealed to form a conduit of 2mm diameter and 20mm length. To improve the axonal regeneration and to render better environment for endogenous and exogenous Schwann cell behaviour, the microgeometry and surface of conduit was modified by coating with thin film of calcium phosphate. Cellular viability within the conduit and attachment to its wall were assessed with MTT assay and SEM study. Milipore filter conduit showed significantly higher rate of Schwann cell attachment and viability than the culture dish. However, the reverse was true in case of fibroblast. Coating with thin film of low crystalline calcium phosphate made more favorable environment for both cells with minimal change of pore size. These findings means the porous calcium phosphate coated milipore nerve conduit can provide much favorable environment for endogenous Schwann cell proliferation and exogenous ones, which are filled within the conduit for the more advanced strategy of peripheral nerve regeneration, with potential of reducing fibrotic tissue production.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.93-101
• /
• 2014

Movie stories can be retrieved efficiently by analyzing a script, which is a blueprint of the movie. Although the movie script is described in the formatted structure of Final Draft, it is hard to restore the type without analyzing the story of the sentences since the scripts open on the website are mostly broken. For this purpose, it is necessary to develop and provide the web-based script analysis software so that users collaboratively and freely check and correct the errors in the results after automatically parsing the script. Hence, in this paper we suggest the structure of the web-based collaborative script analysis platform that enables users to modify and filter the type error of the script for high level of film data accumulation and performance evaluation for the implementation results is conducted. Through the experiment, accuracy of automatically parsing appears to be 64.95% and performance of modification by collaboration showed 99.58% of accuracy of parsing with errors mostly corrected after passing through 5 steps of modification.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.204-214
• /
• 2012

This paper proposes an image segmentation for a vision-based automated defect inspection system on surface image of TFT-LCD(Thin Film Transistor Liquid Crystal Display) panels. TFT-LCD images have non-uniform brightness, which is hard to finding defective regions. Although there are several methods or proposed algorithms, it is difficult to divide the defect with high reliability because of non-uniform properties in the image. Kamel and Zhao disclosed a method which based on logical stage algorithm for segmentation of graphics and character. This method is a one of the local segmentation method that has a advantage. It is that characters and graphics are well segmented in an image which has non-uniform property. As TFT-LCD panel image has a same property, so this paper proposes new algorithm to segment regions of defects based on Kamel and Zhao's algorithm. Our algorithm has an advantage that there are a few ghost objects around the defects. We had experiments to prove performance in real TFT-LCD panel images, and comparing with the FFT(Fast Fourier Transform) method which is used a bandpass filter.

• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.87-94
• /
• 1995

Since March 1992, total 200 patients who visited our hospital as functional or organic lesions of central nervous system were treated by gamma knife stereotactic radiosurgery for 27 months. Thirty-nine patients of total cases was diagnosed as cerebral arteriovenous malformation. The rate of magnification on X-ray film was reduced by cutting fixation adaptor from 1.0 to below 1.45 times. In order to treat the deep- and lateral-seated cerebral arteriovenous malformation, we slightly modified the angiographic indicator, the commercial Leksell system, by cutting each inner sides about 5mm, We performed the more distinction of the scales by adapting 0.5mm or 1mm copper filter to angiographic indicator. The center point of indicator(X=100mm, Y=100mm, Z=100mm) is corrected by adjusting scales of X-, Y-, Z-axis to each inner 100 and outer 100 point within 1-2mm by repeated exposure of X-ray on films in trial-and-errors. We have developed the 'GKANGIO' programed as the Fortran-77 in Microvax - 3100, which can save treatment planning time and perform accurate pretreatment planning using the theoretical target metrix center. The theoretical description of the simplified method is presented for the reduction of experimental and numerical errors in treatment planning of radiosurgery.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.149-156
• /
• 2007

The purpose of this study was to compare the world class women's hurdlers with kinematic variables Lee Yeon-Kyoung's in the 100m hurdle. Among korea elite female hurdler, Lee Yeon-Kyoung was participated as a subject. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The real-life three-dimensional coordinate data of digitized body landmarks were smoothed using a fourth order Butterworth low pass recursive digital filter with an estimated optimum cutoff frequency of 7.4Hz. After analyzing and comparing Lee Yeon Kyung's kinematic variables with the world top class hurdlers in the woman's 100m hurdle run, the following conclusions were obtained. 1. Lee should be able to increase the speed with over 5.4m/s from start to first hurdle and then maintain the speed range from 8.33m/s to 8.67m/s until 10th hurdle. Lee should have to maintain the speed with 8.51m/s from 10th hurdle to finish line. 2. Lee has to reach her maximum running speed at 5th hurdle and then has to shorten running time with 0.5sec between hurdles. 3. Lee should be able to run around 2.5sec from start to frist hurdle and then maintain under 1.00sec following phases. Lee should be able to maintain under 1.10sec from 10th hurdle to finish line. 4. Lee needs to control a consistent takeoff and landing distance pattern, Lee needs to lower the height of the center of gravity of the body with 0.33m when she clears the hurdles.