• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.185-190
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.97-103
• /
• 2010

In this study, a new, relatively simple fabrication method for forming a mesoporous $Al(OH)_3$ film on Al substrates was demonstrated. This method, i.e., alkali surface modification, was simply comprised of dipping the substrate in a $5\times10^{-3}$ M NaOH solution at $80^{\circ}C$ for one minute and then immersing it in boiling water for 30 minutes. After alkali surface modification, a mesoporous $Al(OH)_3$ film was formed on the Al substrate, and its chemical state and crystal structure were confirmed by XPS and TEM. According to the results of the XPS analysis, the flake-like morphology after the alkali surface modification was mainly composed of $Al(OH)_3$, with a small amount of $Al_2O_3$. The mesoporous $Al(OH)_3$ layer was composed of three regions: an amorphousrich region, a region of mixed amorphous and crystal domains, and a crystalline-rich region near the $Al(OH)_3$ layer surface. It was confirmed that the stabilization process in the alkali surface modification strongly influenced the crystallization of the mesoporous $Al(OH)_3$ layer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.411-416
• /
• 2015

Olive flounder Paralichthys olivaceus production has increased gradually in recent years, but prices have fallen. Thus, the development of a variety of processed foods incorporating olive flounder would help to increase the income of fishermen. This study was conducted to investigate the best method for olive flounder ball processing. Clean olive flounder were divided into five portions. Olive flounder meat (100 g with added egg white 39 g) was chopped and then mixed with 10 mL fresh cream and ingredients. The dough was molded into the shape of a ball. The olive flounder balls were then processed by two different methods. In the first method, the flounder ball was boiled in water for 3 min then vacuum-packed in polyethylene film and stored at $-20^{\circ}C$ for 7 days. After 7 days, the ball was thawed and heated in a microwave for 2 min (Sample-1). In the second method, the ball was vacuum-packed in polyethylene film without boiling and then stored at $-20^{\circ}C$ for 7 days before thawing and boiling in water for 3 min (Sample-2). After heating, both types of olive flounder balls were evaluated. Various factors (including the viable bacterial count, chemical composition, pH, hardness, thiobarbituric acid level, salinity, and free amino acid content) were measured, and a sensory evaluation was conducted. Based on the results of the sensory and hardness evaluations, Sample-1 was deemed to be superior to Sample-2.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.61-68
• /
• 1975

This study was conducted (1) to isolate the film-forming yeast from the commercially available soy sauce, (2) to identify the state of soy sauce fermentation by the use of yeasts, (3) to confirm characteristics of yeasts. The result were as follows. 1. These yeast strains in the soy sauce fermentation test showed full fermentation of whole sugar content, reduction of the pure extract and relative reduction in total nitrogen. Soy sauce color was somehow faded to lower the stability of soy sauce. 2. In anti-fungal activity test butylparaben at a higher level 60 ppm., sodium propionate 2,400 ppm, sodium benzoate 800 ppm., menadion 165 ppm, showed their anti-fungal effect, while alcohol did not show the effect in the 3% additive group. 3. The optimum sodium chloride concentration for these strains in the 2% G.Y.P. medium was 5% and optimum temperature was $30^{\circ}C$. The extinction temperature was $62^{\circ}C$ for strain No-1 and No-3, and was $65^{\circ}C$ for No-2 and No-4. 4. The film-forming soy sauce turned out in the gas chromatogram to possess much flavor of low boiling point as compared with the standard. These flavors were considered due to flavor spoilage of the soy sauce. 5. These isolated yeasts were identified Saccharomyces rouxii (film-forming yeast) in the Lodder's taxanomic study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.99-99
• /
• 2009

Two different micro-flows during the evaporation of ink droplets were achieved by engineering both surface tension gradient and compositional gradient across the ink droplet: (1) Coffee-ring generating flow resulting from the outward flow inside the ink droplet & (2) Marangoni flow leading to the circulation flow inside the ink droplet. The surface tension gradient and the compositional gradient in the ink droplets were tailored by mixing two different solvents with difference surface tension and boiling point. In order to create the coffee-ring generating flow (outward flow), a single-solvent system using N,N-dimethylformamide with nano-sized spherical alumina particles was formulated, Marangoni flow (circulation flow) was created in the ink droplets by combining N,N-dimethylformamide and fotmamide with the spherical alumina powders as a co-solvent ink system. We have investigated the effect of these two different flows on the formation of ceramic films by inkjet printing method, The packing density of the ceramic films printed with two different ink systems (single- and co-solvent systems) and their surface roughness were characterized. The dielectric properties of these inkjet-printed ceramic films such as dielectric constant and dissipation factor were also studied in order to evaluate the feasibility of their application to the electronic ceramic package substrate.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.205-210
• /
• 2022

We demonstrated roll-to-roll microcontact printed (mCP) microlens array (MLA) to enhance the light extraction of organic light emitting diodes (OLEDs). The commercially provided microlens array is used as a template for polydimethylsiloxane (PDMS) roll stamp. The fluorinated film is formed on the PDMS roll stamp from fluorinated ink with low boiling point and printed onto the bottom side of the organic light emitting diode without high pressure and high thermal treatment. With optimized concentration of ink, the pattern which is almost identical to that of the template MLA was successfully printed. Due to the structure and low optical absorbance of microcontact printed MLA, the external quantum efficiency of OLED was improved by about 18%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.187-192
• /
• 2004

We try to use isopropanol which has low boiling point to prepare ZnO thin films at low temperature. ZnO thin films were prepared by sol-gel spin-coating method using zinc acetate dehydrate-isopropanol-monoethanolamine (MEA) solution. The c-axis preferred orientation and optical properties of ZnO films with preheating temperature have been investigated. ZnO thin films were preheated at 200 to $300^{\circ}C$ with an interval of $25^{\circ}C$ and post-heated at $650^{\circ}C$. The ZnO film preheated at $275^{\circ}C$ and post-heated at $650^{\circ}C$ was highly oriented along c-axis (002) plane, and the surface with homogeneous and dense microstructures was formed having nano-sized grains. The optical transmittance was above 90 % in the visible range and exhibited absorption edges at 368 nm wavelength.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2113_2114
• /
• 2009

Chalcopyrite based sollar cells have received much attention because of their tunable electronic and optical properties. As a typical ternary chalcopyrite material, $CuInS_2$ has been considered as one of the most popular and promising candidates as absorber materials for photovoltaic applications because of its high absorption coefficient and environmental consideration. In this study, $CuInS_2$ powders have been synthesized using polyol process of a mixture of copper nitrate, indium nitrate, and thiourea with various stoichiometric molar ratios in ethylene glycol at $196^{\circ}C$. As boiling time goes by, the color of metal ion mixed solutions were changed transparent green to dark green and finally turned to black by reduction of OH- radicals. The prepared powders were fully characterized using SEM, XRD. The particle shape of black colored powders showed sphere with about 50 nm in particle size compared to those with dark green colored powders showed irregular shape with about $1{\mu}m$ in particle size. The XRD results showed highly crystallized $CuInS_2$.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.425-431
• /
• 1999

$Pb(Zr_{0.52}, Ti_{0.48})O_3$ (PZT) thick films as an actuating material with conducting oxides, $(La_{0.5}Sr_{0.5}) CoO_3$ (LSCO), have been fabricated by sol-gel method for Optical Micro-Electro-Mechanical System (MEMS) devices, in which PZT/LSCO/SiO2 structures were used. In order to improve the adhesion to LSCO solution in order to enhance the wetting behavior of a water-based LSCO precursor solution and further to improve the adhesion between LSCO and $SiO_2$ layers. PZT films were made using 1-3 propanediol based precursor solution which has a high viscosity and a boiling point appropriate for thick film fabrication. In the precursor solution, Ti-propoxied and Zr-propoxied are partially substituted with acetylacetone to achieve the solution stability while maintaining reactivity. Crack free PZT films (0.8~1$\mu\textrm{m}$) have been successfully fabricated at crystallization temperatures above $700^{\circ}C$. Dielectric constants and dielectric losses of the PZT films were 900~1200and 2~5%, respectively. Piezoelectric constant $d_{33}$ of the PZT films constrained by a substrate were 200pm/V at 100kV/cm.