• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.176-180
• /
• 2000

The higher sugar and lower starch in super sweet corn may be due to modified endosperm genes sh, bt series, but its seeds have major limiting factors causing low germination and low seedling vigor, This study was conducted to determine what measurable kernel characteristics during the grain tiling period might be more useful as a guide to optimize harvest date for good seed quality in hybrid super sweet corn production. Artificial crossing in super sweet corn hybrid (Chodangok 1) was made on the same day, and ears were harvested from 18 days to 53 days after pollination at weekly intervals. Kernel weight, moisture content, hardness, endosperm rate, seedling height and storage nutrients such as sugars, protein, starch, and germination rate were measured for the kernels at each harvest. Super sweet corn hybrid, Chodangok 1 presented satisfactory germination rate above 70% when harvested on 39 to 46 days after pollination. Its storage nutrients at that time were 23.7-24.2% in starch content 5.5-5.9% in total sugars, 38.9-46.6% in kernel moisture, and 62.7-64.2% in endosperm rate. Germination rate was extremely high when harvested on 39 days after pollination. The black layer of Chodangok 1 could not be used as an indicator for seed harvest. These results suggested that optimum harvest date seems to be 39 days, and kernel moisture and starch content could be used as indications of kernel maturity in deciding when to harvest fer good seed quality in super sweet corn.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.2
• /
• pp.223-228
• /
• 1991

In the 7th century, Prince Shoudoku built the Horyu temple at Nara, when Buddhist culture in Japan had highly prospered after Buddhism were transmitted to Japan from Korea. At the same time, the three ancient country of Silla, Koguryo, and Baekjae had generally effected on Japanese culture and life as well as Buddhist events, religious services and sacrificial offerings in form. And even now there are kept above one thousand of tablewares which was used at the age and was made of wood and alloy manufactures from Han peninsular in Seisoin at Nara. Through these historical backgrounds, it could be presumed that the religious services and the sacrificial offerings for Prince Shodoku for above 1300 years help us to study and estimate the ancient dietary culture of Korean and Japanese. There are several points of similarities which are remained and maintained in Han Peninsular. 1. They used high filling method of the secrificial offerings and high receptacles in the religious service. 2. The cakes were mainly made of nonglutinous rice tharr glutinous rice 3. They decorated the pheonix instead of flowers and the other kinds of birds in Korea. 4. Kakiage of fried confectionary was founded in many kinds of them at present.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.575-588
• /
• 2005

Family and parents which serve as a primary group for the children's development also play important role in their cerebral palsy children's treatment. This study wants to know how the parents' participation in their children's physical therapy and satisfaction degree have an impact on their children's improvement of the motor function. For that purpose, a home made self filling survey was conducted of 156 cerebral palsy children's parents whose children were treated in 4 university general hospitals and 3 welfare centers from the 1st of April 2004 to the 31th of march 2005. The gross motor function was employed to evaluate the cerebral palsy children's motor function improvement. In this study, those questioned were divided into two groups according to the time of treatment. 'Group A' is consist of the patients whose parents attended to the treatment more than one hour at home. The patients who belonged to 'Group B' were treated less than one hour at home. The general features of the cerebral palsy children and their parents and the characteristics of their physical disability, the parents' participation and their satisfaction degree were examined by survey. Evaluating the difference between two groups' motor function according to their parents participation degree in the physical therapy leads to the following results. First, 'Group A' was better than 'Group B' in their satisfaction degree with the physical therapy and participation degree. Statistically 'Group A' was superior to 'Group B' in the requirements of the information and education for the children with cerebral palsy. Second, after two months of treatment, 'Group A' showed more statistically significant improvement than 'Group B' in every items as like lying in item 1, sitting in item2, crawling and kneeling in item 3, standing in item 4, walking,running, jumping in item 5. Third, parents' participation in physical therapy and satisfaction degree have some relevance to their children' motor function improvement. The satisfaction degree is related to motor function like crawling and kneeling in item 3, walking,running, jumping in item 5. It is showed that the parents' participation degree and information about handicapped children.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.777-782
• /
• 2011

Micro features on the surface are well-known to have significant effects on optical or mechanical properties such as the optical interference, reflectance at the surface, contact angle, interfacial friction, etc. These surface micro features are increasingly employed to enhance the functionality of the applications in various application areas such as optical components for LCD or solar panel. Diverse surface features have been proposed and some of them are showing excellent efficiency or functionality, especially in optical applications. Most applications employing the micro features need manufacturing process for mass production and the injection molding and roll-to-roll forming, which are typical processes for mass production adopting polymeric materials, may be also preferred for micro patterned plastic product. Since the functionality or efficiency of the surface structures generally depends on the shape and the size of the structure itself or the array of the structures on the surface, it would be very important to replicate the features very precisely as being designed during the molding the micro pattern applications. In this paper, a series of research activities is introduced for roll-to-roll forming of micro patterned film including filling of patterns with UV curable resin, demolding of surface structures from the roll tool, control of surface energy and cure shrinkage of resin and dispose time and intensity of the UV light for curing of UV curable resin.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.6
• /
• pp.526-530
• /
• 1994

This study was conducted to investigate photosynthetic response to four sequential air influx rate with rice(Oryza sativa L.)plants moved from a natural condition to constant condition with automatic regulation selected environmental variables on 13th~15th days after anthesis. In time course of photosynthetic response to increasing air influx rate(200-280-360-440 ml / min.), stomatal conductance decreased rapidly at the beginning after treatment and then oscillated with a free-running period of a approximately 1 hour to 1 hour 30 minutes until reached up to steady-state condition. Similar change was also observed $CO_2$ assimilation rate. Stomatal conductance decreased throughout the air influx rate sequence, but the rate of decrease was similar to the decrease in $CO_2$ assimilation rate observed under continuous air influx rate conditions. In starch granules during grain filling period under air influx rate(440 ml / min.) , compound starch granules were loosing and a number of hollows were observed in surface of single starch granules. Evidences from several approaches indicate that synchronization of stomatal conductance and$CO_2$ assimilation rate was closely inter-related tinder increase of air influx rate and increase of air influx rate influenced the$CO_2$ uptake in photosynthetic processes and compound starch granule, as 'end products' of photosynthesis.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.115-129
• /
• 2015

The cut-slope of a large-sectional tunnel portal is recognized as a potential area of weakness due to unstable stress distribution and possible permanent displacement. This paper presents a case study of a slope failure and remediation for a large-scale cut-slope at a tunnel portal. Extensive rock-slope brittle failure occurred along discontinuities in the rock mass after 46 mm of rainfall, which caused instability of the upper part of the cut-slope. Based on a geological survey and face mapping, the reason for failure is believed to be the presence of thin clay fill in discontinuities in the weathered rock mass and consequent saturationinduced joint weakening. The granite-gneiss rock mass has a high content of alkali-feldspar, indicating a vulnerability to weathering. Immediately before the slope failure, a sharp increase in displacement rate was indicated by settlement-time histories, and this observation can contribute to the safety management criteria for slope stability. In this case study, emergency remediation was performed to prevent further hazard and to facilitate reconstruction, and counterweight fill and concrete filling of voids were successfully applied. For ultimate remediation, the grid anchor-blocks were used for slope stabilization, and additional rock bolts and grouting were applied inside the tunnel. Limit-equilibrium slope stability analysis and analyses of strereographic projections confirmed the instability of the original slope and the effectiveness of reinforcing methods. After the application of reinforcing measures, instrumental monitoring indicated that the slope and the tunnel remained stable. This case study is expected to serve as a valuable reference for similar engineering cases of large-sectional slope stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.66-73
• /
• 2020

In the hydrogen compression cycle, which is currently being developed, hydrogen is compressed to a very high pressure using a compressor, and then stored and used in a high-pressure vessel. This shows that an increase in the temperature of hydrogen in the vessel due to a pressure rise during the filling process and the pressure fatigue due to the repeated cycle may cause problems in the reliability of the vessel. In this paper, for the entire processes in a 50 MPa hydrogen compression system, theoretical and numerical methods were conducted to analyze the following: the temperature increase of hydrogen in the vessel and the time required to reach thermal equilibrium with the surroundings, the change in temperature of hydrogen passing through the pressure reducing valve, and the required capacity of the heat exchanger for cooling the vessel. The results will be useful for the design and construction of hydrogen compression systems, such as hydrogen charging stations.

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.3-20
• /
• 1987

With regard to the Quaternary formations in the Korean Peninsula, very few studies have been done specially from a stratigraphic viewpoint. The alluvial sediments filling in the valleys have often been considered as the only formation of Quaternary age (more precisely of the Holocone) and so the Pleistocene was regarded as an erosional or nondepositional episode. This is apparently evident from a quick look at the general geological maps of the Peninsula, which show a lithological sequence of Mesozoic or Paleozoic substrata immediately overlain by Holocene alluvium. Likewise, the Pleistocene period was described in terms of unconformity in most local or regional stratigraphical successions of the Peninsula. Recently several different types of Quaternary formation, besides the so-called Holocene alluvium in the valley plain have been found around the Peninsula. They consist of coastal deposits, marine or fluviatile terrace deposits, ancient valley fill deposits or slope deposits. Some parts of the volcanic sediments in Jeju Is. are also known as the Quaternary sequence. Thus the Quaternary deposits in the Peninsula are far more developed than previously known to gelolgists. Moreover the importance of Quaternary research became recently apparent in Korea due to the shortage of raw materials and to the policy of an optimum land-use. Advanced constructions and land reclamation have required more precise engineering parameters of loose materials and an estimation of land stability. This does not imply only the engineering, or the structural properties of the loose material, but at the same time the basic study of the sediments from the stratigraphical and environmental viewpoints has been necessary. In this connection, Quaternary outcrops specially along the coastal fringe of the Peninsula have been mapped, profiled and sampled for sedimentological, clay-mineralogical and palaeomagnetic studies. All these results are compiled for the core of the Quaternary stratigraphy of the Peninsula.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.186-193
• /
• 2009

In this paper, we adopted E-MOLD patent technology in order to fabricate Prismless LGP(Light Guide Panel) fur cellular phone and estimate the transcription of injection-molded parts. Then, we manufactured the Ni stamper fur Prismless LGP using MEMS process. And the stamper was installed in the movable heated core which is the key part of a patented mold. Using this mold, we manufactured injection-molded plastic LGP parts with different mold temperatures so that we investigate effect of the temperature on the transcription of the parts. The CAE analysis was also conducted in order to compare with the experimental results. The transcription of LGP parts with various mold temperature displayed $100^{\circ}C$(25.0nm), $140^{\circ}C$(48.4nm), $180^{\circ}C$(52.1nm) and when compared with stamper(521Inm), transcription was superior at $180^{\circ}C$. According to the CAE results, moldability was improved as mold temperature ($50^{\circ}C{\sim}180^{\circ}C$) increased, but when filling time($1{\sim}2sec$) increases, it decreased at $160^{\circ}C$. And transcription and moldability were improved markedly at glass transition temperature($140^{\circ}C$).

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.931-937
• /
• 1999

Styrene dimers and trimers from polystyrene cup noodle containers were analyzed by GC and GC/MS extracted with various simulants. For the quantitation of styrene dimers and trimers, 1,3-diphenylpropane (DP) and benzyln-butyl phthalate (BBP) were chosen as the standards. The results showed that the average of the styrene dimers in the containers was 603 ppm, and that of trimers was 5731 ppm. Four styrene dimers, including 1,2-diphenyl-cyclobutane, were identified as well as seven trimers such as 2,4,6-triphenyl-l-hexene. The migration of the styrene dimers and trimers, from the cup noodle containers of polystyrene into foods, was conducted using simulants including boiling water as well as soybean oil and n-heptane. In addition to, the analysis of each migrated styrene was also performed filled with boiling water into noodle and soup after certain time (5, 10, 20, 30 min). The results showed that the migration of styrene dimers and trimers from cup noodle containers was not detected in the case of using boiled water or soybean oil as a simulant, while styrene dimers and trimers were detected 1.18 ppm and 14.21 ppm, respectively, when heptane was adopted as a simulant. In the case of filling with boiled water into noodle and soup, both styrenes were not detected at 5 min and 10 min, however, some samples standing for 20 min released styrene dimers and trimers as much as 0.009 ppm, and 0.019 ppm for 30 min.