• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.4
• /
• pp.352-364
• /
• 2002

There has been a great interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However the high melting temperature and chemical reactivity of titanium necessitates casting systems different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new developments in Ti casting systems, inadequate mold filling and internal porosity are frequently observed casting defects. Therefore, the study on the fabrication technique including sprue design to solve these casting defects is still necessary. In this study to evaluate the effect of sprue design on the castability of simulated cast titanium crowns, 10 cylindrical cast crowns for each group with four different sprue design(Single group. Double group, Runner bar group. Reservoir group) were fabricated. An impression of the entire casting margin was made and cut at $90^{\circ}$ intervals, and the sections were photographed in a microscope at $100{\times}$ magnification to record marginal discrepancy. The internal porosities of the cast crowns were disclosed by radiographs. Within the limits of this study. the following conclusions were drawn. 1. The overall mean marginal discrepancies for each group were as follows: Double group, $43.65{\mu}m$; Reservoir group, $50.27{\mu}m$; Single group, $54.17{\mu}m$; Runner bar group, $58.90{\mu}m$ (p<0.05). 2. The mean of marginal discrepancies for wax patterns was $10.65{\mu}m$. 3 The numbers of internal porosity showed the most in Runner bar group followed by Single group, Reservoir group, and Double group.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.705-715
• /
• 2003

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically compomer and Ketac Silver as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiostcal flap was elevated. Following decortication with 1/2 high speed round bur, furcation defect was made on maxillary premolar. 2 month later one premolar was filled with compomer and the other premolar was filled with Ketac Silver. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. Results were as follows. 1. Compomer & Ketac Silver restoration were encapsulated fine connective tissue. 2. In 4 weeks, compomer & Ketac Silver restoration slightly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, compomer & Ketac Silver restoration were less infiltrated iflammatory cell and encapsulated fine connective tissue. 4. Therefore, compomer & Ketac Silver filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances is possible clinical method and this technique is useful method for maxillary furcation involvement but it is thought that periodic maintenance should be needed

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.433-440
• /
• 2004

Since the numerical analysis was adopted in the mold design, lots of computational methods have been proposed for the simulations of casting processes for the various shaped molds. Today, it is possible to simulate the filling and solidification processes of most casts using the VOF technique. Though the three-dimensional numerical model based on the Cartesian coordinate system can be applied to any shape of cast, it becomes very inefficient when the three-dimensional model is applied to the cast of axi-symmetrical shape since the control volume includes at least 11 of the physical model. In addition, the more meshes should be distributed along the circumferential boundaries of curved shape in the Cartesian coordinate system fur the better results, while such curved circumferential boundary does not need to be considered in the two-dimensional cylindrical coordinate system. This motivates the present study i.e. developing a two-dimensional numerical model for the axi-symmetrically shaped casts. The SIMPLER algorithm, the VOF method, and the equivalent specific heat method have been adopted in the combined algorithm for the flow calculation, the free surface tracking, and the phase change heat transfer, respectively. The numerical model has been applied to the casting process of a pulley, and it was proven that the mesh and time effective calculation was accomplished comparing to the calculation using three-dimensional model.

• Conservation Science in Museum
• /
• v.21
• /
• pp.17-28
• /
• 2019

The term jinjuseon(眞珠扇), meaning literally a pearl fan, refers to a fan decorated with precious stones for use in royal wedding ceremonies. This study examined a jinjuseon housed in the National Palace Museum of Korea (NPMK) which currently lacks jeweled ornaments. In order to determine whether pearls or other gemstone settings originally ornamented the fan,the surface and composition of the gray materials remaining on the washers were investigated and the fan was compared with other artifacts decorated using similar techniques. The analysis revealed that the gray materials visible around the round rims of the washers contain tin-lead alloys. The traces of folded nails suggest that soldering was not applied. The remains of the infill observed in other artifacts with bezel settings indicate that this jinjuseon in the NPMK collection was produced using abezel setting technique wherein pearls or other gemstones were affixed by filling cylindrical bezels with tin-lead alloys.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.75-84
• /
• 2016

Purpose: In-situ water quality monitoring based on ion-selective electrodes (ISEs) is a promising technique because ISEs can be used directly in the medium to be tested, have a compact size, and are inexpensive. However, signal drift can be a major concern with on-line management systems because continuous immersion of the ISEs in water causes electrode degradation, affecting the stability, repeatability, and selectivity over time. In this study, a computer-based nitrate monitoring system including automatic electrode rinsing and calibration was developed to measure the nitrate concentration in water samples in real-time. Methods: The capabilities of two different types of poly(vinyl chloride) membrane-based ISEs, an electrode with a liquid filling and a carbon paste-based solid state electrode, were used in the monitoring system and evaluated on their sensitivities, selectivities, and durabilities. A feasibility test for the continuous detection of nitrate ions in water using the developed system was conducted using water samples obtained from various water sources. Results: Both prepared ISEs were capable of detecting low concentrations of nitrate in solution, i.e., 0.7 mg/L $NO_3-N$. Furthermore, the electrodes have the same order of selectivity for nitrate: $NO_3{^-}{\gg}HCO_3{^-}$ > $Cl^-$ > $H_2PO_4{^-}$ > $SO{_4}^{2-}$, and maintain their sensitivity by > 40 mV/decade over a period of 90 days. Conclusions: The use of an automated ISE-based nitrate measurement system that includes automatic electrode rinsing and two-point normalization proved to be feasible in measuring $NO_3-N$ in water samples obtained from different water sources. A one-to-one relationship between the levels of $NO_3-N$ measured with the ISEs and standard analytical instruments was obtained.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.883-891
• /
• 2008

Multiple antenna orthogonal frequency division multiplexing (OFDM) is a promising technique for the high downlink-capacity in the next generation wireless systems, in which adaptive resource allocation is an important research issue that can significantly improve the performance with guaranteed QoS for users. However, most of the current resource allocation algorithms are limited to unicast system. In this paper, dynamic resource allocation is studied for multiple antenna OFDM based systems with multicast service. In the simulation, the performance of multicast system was compared with that of the unicast system. Numerical results also show that by using the proposed algorithms the system capacity is significantly improved compared with the conventional scheme.

• Journal of the Korean Society of Costume
• /
• v.56 no.3 s.102
• /
• pp.116-128
• /
• 2006

The purpose of this study is to investigate Seon expressed in the costume of Chinese Song. For the purpose, this researcher classified types of Seon, found in the Chinese costume, in terms of composition method, decorative technique and used materials. In addition, the researcher attempted to analyze formative characteristics of Sean in accordance with the range and post of use, pattern and color combination. Seon expressed in the costume of Chinese Song can be classified into standard, decoration, application and Buseon in type. When the typical distribution of Seon expressed in the costume of Chinese Song, standard type was highest in percentage, especially different color type. Looking at the range of use, Seon was mainly used for outfits, especially Jikcheol(直?) and Hakchangeui for men and Baeja(背子) for women. Looking at the post of use, Seon was mainly used to edges of costume and sometimes also to seams. In regard to materials of Seon, they were selectively used depending on the existence or non-existence, size and brilliance or non-brilliance of pattern employed in the texture of Seon. The most commonly used pattern of Seon was single-type pattern, especially the pattern of plant. Pattern arrangement was most often filling in type. Concerning the color combination of Seon, men's dress most often used black-white combination, followed by different color combination while, women's dress most often employed complementary color combination, followed by different color combination.

• Composites Research
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2017

Resin transfer molding (RTM) is a mass production process that allows the fabrication of composites ranging in size from small to large. Recently, fast curing resins with a curing time of less than about 10 minutes have been used in the automotive and aerospace industries. The viscosity of resin is bound up with the degree of cure, and it can be changed rapidly in the fast-cure resin system during the mold filling process. Therefore, it is advantageous to experimentally measure and evaluate the degree of cure because it requires much effort to predict the flow characteristics and cure of the fast curing resin. DMA and dielectric technique are the typical methods to measure the degree of cure of composite materials. In this paper, the resin flow and degree of cure were measured through the multi-channel dielectric system. A total of 8 channels of dielectric sensors were used and resin flow and degree of cure were measured and compared with each other under various pressure conditions.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.304-310
• /
• 2005

Bulging of the lower eyelid & tear trough groove is regarded as a sign of aging. In the past, the surgical excision of the fat pad has been the mainstray of the management of lower palpebral bag in cosmetic blepharoplasty, Recently, fat pad sliding method has been introduced to make more attractive lower eyelids. We used the fat pad for covering the hollowness of the lower eye lid. And we use redundant fat pad for filling & augmentation of the lower eye lid by reflexion. Redraping of the orbicularis arc, with its accompanying midfacial fat repositioning, anatomically restores the cheek and lower lid to make more youthful contour. By redraping and fixing the orbicularis arc on the medial surface of the orbital rim, it becomes a more attractive midface and may prevent of ectropion. From August, 2002 to July, 2004 in correction of lower palpebral bulge & tear trough groove, these two technique were performed in 42 consecutive individuals (84 lower eyelid) for two-year period. Follow up ranged from 3 to 15 months. (an average of 9 months) Palpebral bulge & tear trough groove were corrected and obtained a youthful midface. Complication was rare. The advantages of these techniques are that: prevent in of secondary palpebral bulge and irregularity of lower eyelid by using of reflexed fat fad; prevent in of ectropion. Thus an attractive midface is obtained by redraping of orbicularis arc.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.84-84
• /
• 2002

The advantages of the OPS techniques(Vajta G et al, Mol Reprod Dev 51: 53-58,1998) give 1) high survival rates of various types of eggs, 2) quick and simple process, 3) inexpensive equipment and reduced chilling injury. The efficiency of IVM/IVF technique in the porcine species is relatively lower than that obtained in other species such as ruminants. Two experiments were designed to investigate the effects of in-vitro fertilization of porcine oocytes matures using different OPS protocol for chilling and warming of vitrification. Porcine oocytes from ovaries collected at abattoir were matured for 44 hours in TCM199 Earle's salt supplemental with pyruvate, pff, L-cysteine, hormones and gentamycin. Oocytes were denuded and fertilized with frozen boar semen by common method. Porcine embryos produced routinely by in-vitro culture system of NCSU23 medium. The vitrification and the warming were conducted by OPS method with the glass micropipette instead of straw vessels and modified the protocol of G.Vajta(1999). In Exp 1, Chilling/Warming:Holding Medium(HM)+EG+DMSO/HM +sucrose Medium(SM) at 39$^{\circ}C$ warm stage. In Exp 2, : PBS+CS+EG+Ficoll+ Trehalose/PBS+Trehalose at 25$^{\circ}C$ stage. Filling, freezing, packing, thawing out and further culturing were performed to follow the basic protocol of G Vajta. During IVM-lVC and post-warming, fertilization parameter and developmental potential were compared to and statistically analysed. It was not significantly different from Exp 1 and Exp 2 but 25$^{\circ}C$ of stage was slightly higher on the morula/blastocyst forming rate and better atmosphere for worker than that at 39$^{\circ}C$ stage.