• 인터넷정보학회논문지
• /
• 제16권3호
• /
• pp.33-41
• /
• 2015

본 논문에서는 디지털논리회로의 설계에 있어 필수적인 카르노 맵 간략화 과정을 교육용 자바 애플릿의 형태로 구현하였다. 학습자는 구현된 자바 애플릿으로부터 흥미로운 학습을 경험할 수 있으며, 자바 애플릿 설계과정에서 교육공학적인 요소를 단계별로 고려하였기 때문에 학습 효율의 극대화가 가능하다. 학습자는 구현된 자바 애플릿으로부터 디지털 논리회로의 간략화 과정을 마우스로 버튼을 클릭하거나 텍스트를 채워가면서 웹상에서 가상실험을 진행한다. 또한, 간략화 과정에서 발생되는 논리식과 논리회로도는 학습자가 효율적으로 학습할 수 있도록 서로 다른 프레임으로 구성하였으며, 학습자가 구성한 논리회로도가 올바르게 구성되었는지 확인할 수 있도록 하였다. 마지막으로 본 논문에서는 수정된 Quine-McCluskey 간략화 기법에 기초하여 자바 애플릿을 구현하였기 때문에 오프라인 교육의 보조도구로서 사용된다면 학습효율의 향상에 기여할 수 있다는 것을 입증하였다.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.352-364
• /
• 2002

There has been a great interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However the high melting temperature and chemical reactivity of titanium necessitates casting systems different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new developments in Ti casting systems, inadequate mold filling and internal porosity are frequently observed casting defects. Therefore, the study on the fabrication technique including sprue design to solve these casting defects is still necessary. In this study to evaluate the effect of sprue design on the castability of simulated cast titanium crowns, 10 cylindrical cast crowns for each group with four different sprue design(Single group. Double group, Runner bar group. Reservoir group) were fabricated. An impression of the entire casting margin was made and cut at $90^{\circ}$ intervals, and the sections were photographed in a microscope at $100{\times}$ magnification to record marginal discrepancy. The internal porosities of the cast crowns were disclosed by radiographs. Within the limits of this study. the following conclusions were drawn. 1. The overall mean marginal discrepancies for each group were as follows: Double group, $43.65{\mu}m$; Reservoir group, $50.27{\mu}m$; Single group, $54.17{\mu}m$; Runner bar group, $58.90{\mu}m$ (p<0.05). 2. The mean of marginal discrepancies for wax patterns was $10.65{\mu}m$. 3 The numbers of internal porosity showed the most in Runner bar group followed by Single group, Reservoir group, and Double group.

• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.705-715
• /
• 2003

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically compomer and Ketac Silver as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiostcal flap was elevated. Following decortication with 1/2 high speed round bur, furcation defect was made on maxillary premolar. 2 month later one premolar was filled with compomer and the other premolar was filled with Ketac Silver. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. Results were as follows. 1. Compomer & Ketac Silver restoration were encapsulated fine connective tissue. 2. In 4 weeks, compomer & Ketac Silver restoration slightly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, compomer & Ketac Silver restoration were less infiltrated iflammatory cell and encapsulated fine connective tissue. 4. Therefore, compomer & Ketac Silver filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances is possible clinical method and this technique is useful method for maxillary furcation involvement but it is thought that periodic maintenance should be needed

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.433-440
• /
• 2004

Since the numerical analysis was adopted in the mold design, lots of computational methods have been proposed for the simulations of casting processes for the various shaped molds. Today, it is possible to simulate the filling and solidification processes of most casts using the VOF technique. Though the three-dimensional numerical model based on the Cartesian coordinate system can be applied to any shape of cast, it becomes very inefficient when the three-dimensional model is applied to the cast of axi-symmetrical shape since the control volume includes at least 11 of the physical model. In addition, the more meshes should be distributed along the circumferential boundaries of curved shape in the Cartesian coordinate system fur the better results, while such curved circumferential boundary does not need to be considered in the two-dimensional cylindrical coordinate system. This motivates the present study i.e. developing a two-dimensional numerical model for the axi-symmetrically shaped casts. The SIMPLER algorithm, the VOF method, and the equivalent specific heat method have been adopted in the combined algorithm for the flow calculation, the free surface tracking, and the phase change heat transfer, respectively. The numerical model has been applied to the casting process of a pulley, and it was proven that the mesh and time effective calculation was accomplished comparing to the calculation using three-dimensional model.

• 박물관보존과학
• /
• 제21권
• /
• pp.17-28
• /
• 2019

국립고궁박물관 소장 진주선은 궁중혼례에 사용된 화려한 보석장식 부채로, 현재는 보석 장식이 사라진 상태이다. 유물의 명칭처럼 진주선이 처음 제작 당시에는 진주 등의 보석이 감장되었는지를 유추하기 위해 현재 남아 있는 받침못의 표면관찰과 성분분석 결과를 바탕으로 유사한 기법의 유물들과 비교하였다. 연구 결과 받침못을 따라 둥글게 돌면서 표면을 덮고 있는 회색의 이물질은 주석(Sn)-납(Pb) 합금이며, 못의 꺾인 흔적이 찍혀 있는 점을 보아 납땜은 아닌 것으로 보인다. 난집이 적용된 유물들에서 보이는 충진재의 흔적을 통해 국립고궁박물관 소장 진주선은 처음 제작 당시에는 원통형의 난집에 주석-납 합금을 채워서 진주나 보석이 고정될 수 있도록 하는 감장기법이 사용되었을 것으로 여겨진다.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.75-84
• /
• 2016

Purpose: In-situ water quality monitoring based on ion-selective electrodes (ISEs) is a promising technique because ISEs can be used directly in the medium to be tested, have a compact size, and are inexpensive. However, signal drift can be a major concern with on-line management systems because continuous immersion of the ISEs in water causes electrode degradation, affecting the stability, repeatability, and selectivity over time. In this study, a computer-based nitrate monitoring system including automatic electrode rinsing and calibration was developed to measure the nitrate concentration in water samples in real-time. Methods: The capabilities of two different types of poly(vinyl chloride) membrane-based ISEs, an electrode with a liquid filling and a carbon paste-based solid state electrode, were used in the monitoring system and evaluated on their sensitivities, selectivities, and durabilities. A feasibility test for the continuous detection of nitrate ions in water using the developed system was conducted using water samples obtained from various water sources. Results: Both prepared ISEs were capable of detecting low concentrations of nitrate in solution, i.e., 0.7 mg/L $NO_3-N$. Furthermore, the electrodes have the same order of selectivity for nitrate: $NO_3{^-}{\gg}HCO_3{^-}$ > $Cl^-$ > $H_2PO_4{^-}$ > $SO{_4}^{2-}$, and maintain their sensitivity by > 40 mV/decade over a period of 90 days. Conclusions: The use of an automated ISE-based nitrate measurement system that includes automatic electrode rinsing and two-point normalization proved to be feasible in measuring $NO_3-N$ in water samples obtained from different water sources. A one-to-one relationship between the levels of $NO_3-N$ measured with the ISEs and standard analytical instruments was obtained.

• 방송공학회논문지
• /
• 제13권6호
• /
• pp.883-891
• /
• 2008

최근 차세대 무선 통신 시스템으로 다중 안테나 직교 주파수 다중접속 방식(OFDM)에서 적응적 자원 할당 기술은 사용자들의 QoS를 보장하며 성능을 개선 할 수 있는 중요한 연구 분야로 각광을 받고 있다. 그러나, 현재까지, 대부분의 자원 할당 알고리즘은 유니캐스트 시스템에 국한되어 연구가 진행되고 있다. 따라서, 본 논문에서는 다중 안테나 직교 주파수 다중접속 방식 시스템에서 멀티캐스트 서비스를 위한 동적 자원 할당 기술을 제안하고 이에 대한 전산모의 실험 결과를 통하여 성능 개선 효과를 분석하였다. 실험 분석 결과, 제안하는 동적 자원 할당 기술이 기존의 방식에 비해 우월함을 증명하였다.

• 복식
• /
• 제56권3호
• /
• pp.116-128
• /
• 2006

The purpose of this study is to investigate Seon expressed in the costume of Chinese Song. For the purpose, this researcher classified types of Seon, found in the Chinese costume, in terms of composition method, decorative technique and used materials. In addition, the researcher attempted to analyze formative characteristics of Sean in accordance with the range and post of use, pattern and color combination. Seon expressed in the costume of Chinese Song can be classified into standard, decoration, application and Buseon in type. When the typical distribution of Seon expressed in the costume of Chinese Song, standard type was highest in percentage, especially different color type. Looking at the range of use, Seon was mainly used for outfits, especially Jikcheol(直?) and Hakchangeui for men and Baeja(背子) for women. Looking at the post of use, Seon was mainly used to edges of costume and sometimes also to seams. In regard to materials of Seon, they were selectively used depending on the existence or non-existence, size and brilliance or non-brilliance of pattern employed in the texture of Seon. The most commonly used pattern of Seon was single-type pattern, especially the pattern of plant. Pattern arrangement was most often filling in type. Concerning the color combination of Seon, men's dress most often used black-white combination, followed by different color combination while, women's dress most often employed complementary color combination, followed by different color combination.

• Composites Research
• /
• 제30권3호
• /
• pp.202-208
• /
• 2017

RTM은 작은 크기에서 큰 크기의 복합재료를 생산할 수 있는 대량 생산 공정이다. 최근 경화 시간이 약 10분 이내인 속경화 수지가 자동차 및 항공우주 산업에 사용되고 있다. 수지의 점도는 경화 정도와 관련이 있으며, 금형 내부로 충진되는 과정에서 급격히 점도가 변할 수 있다. 따라서 속경화 수지의 유동 특성과 경화도를 해석적으로 예측하는 데 많은 노력이 필요하므로 실험적으로 측정하고 평가하는 것이 유리하다. 복합재료의 경화도를 측정하는 방법은 대표적으로 DMA, 유전기법 등이 있다. 본 논문에서는 다채널 경화 모니터링 시스템을 이용하여 속경화 수지의 유동과 경화도를 측정하였다. 총 8채널의 유전센서가 사용되었으며, 다양한 압력 조건에 따른 금형 내부의 유동과 경화도를 측정하고 상호 비교하였다.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.304-310
• /
• 2005

Bulging of the lower eyelid & tear trough groove is regarded as a sign of aging. In the past, the surgical excision of the fat pad has been the mainstray of the management of lower palpebral bag in cosmetic blepharoplasty, Recently, fat pad sliding method has been introduced to make more attractive lower eyelids. We used the fat pad for covering the hollowness of the lower eye lid. And we use redundant fat pad for filling & augmentation of the lower eye lid by reflexion. Redraping of the orbicularis arc, with its accompanying midfacial fat repositioning, anatomically restores the cheek and lower lid to make more youthful contour. By redraping and fixing the orbicularis arc on the medial surface of the orbital rim, it becomes a more attractive midface and may prevent of ectropion. From August, 2002 to July, 2004 in correction of lower palpebral bulge & tear trough groove, these two technique were performed in 42 consecutive individuals (84 lower eyelid) for two-year period. Follow up ranged from 3 to 15 months. (an average of 9 months) Palpebral bulge & tear trough groove were corrected and obtained a youthful midface. Complication was rare. The advantages of these techniques are that: prevent in of secondary palpebral bulge and irregularity of lower eyelid by using of reflexed fat fad; prevent in of ectropion. Thus an attractive midface is obtained by redraping of orbicularis arc.