• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.292-300
• /
• 2019

Purpose: To reduce the noise and vibration of reinforced concrete slab structures, the damping performance is to be performed experimentally after installing hollow core or filling it with liquid. Method: Using the hollow rate as an experimental variable, the damping ratio and stiffness of each test specimen at impact load are obtained to determine the difference between the damping ratio and stiffness of the numerical analysis. In addition, the damping effects are reviewed by comparing the difference in the damping ratio and stiffness of a test specimen filled with liquid 50% of the study. Results: Since the difference in resistance between a specimen with or without hollow core is 5%, it is judged that there is no structural problem, and the injection of liquid into the hollow core can increase the damping ratio, which can reduce noise or vibration. Conclusion: At less than 20% of hollow rate, there was little damping effect, and at 30%, damping effect was found. However, if liquid is injected into the hollow core of the specimen, damping rate is shown to increase, and the injection of liquid into the hollow part is believed to reduce noise or vibration.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.411-419
• /
• 2009

Objective: The purpose of this study was to determine whether cyst enucleation would be done after marsupialization of large cystic lesion on the jaws or not, and if so, when it should be done. Patients & Methods: 12 patients with cystic lesion treated by marsupialization only and 10 patients with cystic lesion treated by marsupialization followed by enucleation were examined in this study. Postoperative clinical and radiographic examinations were performed at 1, 4, 7, 10, 13, 16, 19 months on 22 patients. Bone regeneration and reduction rate of the residual cystic cavities and bone density were evaluated with a analysis of digital panoramic radiographs. Also histological evaluation of the healing process was performed on 1 patient. Results: Uneventful healing and spontaneous bony filling of the residual cavities were observed in all cases. Postoperative radiographs showed that the size of the lesions was reduced for a few months, but the reduction rate of the residual cavity was minimized for 13~16 months after marsupialization. The bone density was increased 22.5 % after 19 months. Conclusion: This results suggest that the appropriate timing to perform enucleation would be 13~16 months after marsupialization. The state of healing process could be confirmed by histological examination and radiographic evaluation of bone density. Enucleation after marsupialization could be applied appropriately to reduce the periods of bone healing in large cystic lesion on the jaws.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.633-642
• /
• 2006

This study evaluated the surface changes such as surface average roughness(RA), surface free energy(SFE) and wear depth among groups treated with surface penetrating sealant(Fortify, Biscover), non treated polishing group before and after tooth-brushing, analyzing the influence of the sealants in filling of surface microdefects formed during the finishing and polishing procedures of composite resin. Results were as follow(p= 0.05) : 1. Ra was increased Biscover. Fortify and Polishing group. Before abrasion and in 6 months, all groups were statistically significant. In 1 month, 2 months and 3 months no statistical difference was noticed between Fortify and Biscover 2. SFE of Polishig and Biscover group. Fortify and Biscover group were statistically significant before abrasion. SFE of Polishing and Fortify group was statistically significant in 1 month. No statistical difference was noticed among groups in 2 months. SFE of Fortify and Biscover group was statistically significant in 3 months. Polishing and Fortify group, Fortify and Biscover group were statistically significant in 6 months. 3, Wear rate between Polishing and Fortify group was statistically significant in only 1 month. Wear rate between Polishing and Biscover group was statistically different in each month except for 2 month and so it was between Fortify and Biscover group. Considering film thickness of Fortify and Biscover, Fortify almost discappeared after 2 months and Biscover did after 6 months.

• Journal of Radiation Protection and Research
• /
• v.20 no.4
• /
• pp.237-243
• /
• 1995

An estimate is made on the potential generation rate of H: from radiolysis of the Paraffin-wax encapsulant Proposed for the solidified liquid concentrate wasteform. The results show that the radiolytic Production of $H_2$ from paraffin-wax-encapsulated waste is dominated by the radiation energy released from $^{60}Co$. The radiolytic production of $H_2$ will proceed at an initial rate equivalent to aproximately $4.4{\times}10^2cm^3yr^1$ in 200 litre drums that are partly filled with 120 litres of encapsulated waste. The gas production rate will fall to a value of $7.2cm^3yr^1$ after 100 years. The lower flammable limit for $H_2$ in air will be reached in about 25 years and the lower explosive limit for $H_2$ in air would not be reached in 1000years. The timescale in which these safety-related limits are reached is strongly dependent on the level of filling of each waste drum. A reduction of the air space inside each drum would reduce the time required to reach the lower flammable limit.

• Journal of dental hygiene science
• /
• v.12 no.5
• /
• pp.459-468
• /
• 2012

This study surveyed and analyzed on the relationship between obesity and oral health in early child hood and on the oral health realities targeting 90 young children at K Child Care Center where is located in Gangwon-do Province from 10 to 11, June, 2011. As a result, DMF rate accounted for 56.7%. D rate accounted for 42.2%. The young children with the higher age, height in 100~110cm, and weight in 25 kg were indicated to be higher in DF rate than other toddlers. The young children with height in 110~115 cm were indicated to be higher in prevalence of dental caries in deciduous teeth than other young children. It was indicated that the young children in the higher age and weight leads to the higher in DFT index and DFS index. It was indicated that the young children in the more overweight leads to the higher in the index of dental caries in primary teeth, the filling deciduous teeth index, DFT index, DMFS, and DFS index. Accordingly, the child care center needs to systematically perform the oral health education and oral health management for young children, to allow Young children to acquire right food habit, and to pay close attention even to selecting snack.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.35-42
• /
• 2010

Most of the dredged sand generated from the sewage pipe maintenance project and the government's four-river project are disposed depending on abandonment and filling-up. This is caused by the lack of related recycling technology using dredged sand appropriately and high absorption rate and micro-particles of dredged sand producted from existing sand production system. Thus, this study carried out a quality assessment for the dredged sand produced through the optimum washing and sorting system supplementing problems of existing dredged sand production system as a part of research to examine performance of removing micro-particles and foreign substances. As a result of the assessment, the dredged sand produced through the cleaning and sorting system showed a wide quality improvement effect in absorption rate, 0.08 mm sieve pass amount, clay lump volume and organic impurity content, and it turned out to satisfy both the quality standards of this study, KS F 2573(recycled aggregate for concrete) and KS F 2526(aggregate for concrete) so it could be confirmed that it would be able to be used as an aggregate for concrete in the future.

• The Journal of Korean Society for School & Community Health Education
• /
• v.2 no.1
• /
• pp.31-40
• /
• 2001

A study of fluoride effects on teeth of school children was conducted in order to determine the usefulness of fluoride for preventing dental caries. Nine hundred and thirty six(936) elementary school children were selected from Chongju where children drank fluoridated water. Eight hundred and thirty six(836) from Seoul where children applied fluoride topically, and eight hundred and three(803) from Kumi where the children drank non fluoridated water(control). DMFs of school children were compared by the sources of fluoride. This study was conducted from May 1, through June 15, 2000. The results are summarized as follows; 1. The DMF rate of male school children topically applying fluoride was 51.4%, that of female children was 56.1%, and that of both males and females was 54.0%, The DMF rate of male children of control group was 72.4%, that of females was 77.5% and that of both males and females was 74.8%. 2. The DMF rate of male children drinking fluoridated tap water was 56.1%, that of females was 54.1%, and that of both males and females was 55.5%. The rates of control group were 72.4% for males, 77.5% for females and 74.8% for male and female children respectively. 3. The difference of DMF rates between the group of children who drank fluoridated water and applied fluoride topically, and control group was statistically significant. 4. The difference of DMF rates between the children who drank fluoridated water and the children who applied fluoride topically were not statistically significant. 5. The difference of DMFT rates between 5th graders who applied fluoride topically and the 5th graders of control group was not statistically significant. However, the difference of DMFT rates of the 6th graders who applied fluoride topically and the same graders of control group were statistically significant. The difference of DMF rates between 5th and 6th graders who drank fluoridated tap water and the same graders of control group was statistically significant. 6. The difference of DMFT rates between children drinking fluoridated tap water and children applying fluoride topically was statistically significant.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.431-437
• /
• 2009

Various inorganic fillers improve the thermal conductivity and physical properties of organic products. Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric device. The high filling rate of alumina increases the thermal conductivity and properties of products. We successfully developed the spherical alumina by flame fusion process using the oxygen burner with LPG fuel. In the high temperature flame (2500$\sim$3000$^{\circ}C$) of oxygen burner, sprayed powders were melting and then rotated by carrier gas. This surface melting and rotation process made spherical alumina. Especially effects of chemical composition and particle size of stating materials on the melting behavior of starting materials in the flame and spheroidization ratio were investigated. As a result, spheroidization ratio of boehmite and aluminum hydroxide with endothermic reaction of dehydration process was lower than that of the sintered alumina without dehydration reaction.

• Food Science of Animal Resources
• /
• v.40 no.1
• /
• pp.21-33
• /
• 2020

This study aimed to determine the current prevalence, serovar distribution and antimicrobial resistance rate and patterns of nontyphoid Salmonella (NTS) in slaughter sheep and their edible offal. While filling the gap of up to date related information in Turkey, data presented is also of significance since contamination of ovine meat, its products and offal with this pathogen is threat to public health due to their considerably high consumption rates in our country. Current NTS carriage in 200 apparently healthy slaughter sheep by ISO 6579:2002, 6579:2002/A1:2007 standard bacteriology (ISO) was 5% (10/200) (4 fecal content - 2%, 3 mesenterial lymph node - 1.5%, 3 kidney - 1.5%) out of 1,400 samples (0.7%), with no isolation from carcass, liver, gallbladder, spleen. Real-time PCR was in substantial agreement to ISO in confirming Salmonella-suspect isolates (Relative Trueness: 93.6%). S. Newport (40%) was the predominant serovar, followed by the second prevalent serovars as S. Typhimurium and S. Kentucky (20%), and by S. Umbilo and S. Corvallis (10%). Four and 6 out of 10 NTS isolates were susceptible (40%) and resistant (60%) to 18 antimicrobials, respectively. S. Typhimurium isolates were multidrug resistant (MDR) to tigecycline and sulphamethoxazole/trimethoprim, with one also resistant to cefepime. S. Corvallis was MDR to ampicillin, ciprofloxacin, norfloxacin and pefloxacin. The predominance of S. Newport and first isolation of S. Corvallis in sheep in the world; first time isolations of Newport, Kentucky, Corvallis, Umbilo serovars from sheep in Turkey; and high antimicrobial resistance rates obtained in majority of the isolates highlights study findings.

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.179-186
• /
• 1997

This study was carried out to improve the analytical method for determination of germanium in plants by atomic absorption spectrometry with graphite furnace. For the decomposition of plant samples, the mixed acid of $HNO_3+HClO_4+H_2SO_4$(10 : 4 : 1, v/v) was used. Under this condition, time requirement for the decomposition was 4~5 days and recovery rate was more than 98%. Solution for filling up to constant volume after decomposition was 0.1M acetic acid-sodium acetate. Detection limit for determination of germanium was 0.02 ppm by atomic absorption spectrometry with graphite furnace and argon gas. These results were corresponded with the above-mentioned research projects for improving the determination method of germanium in plants.