• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.393-400
• /
• 2022

Agent-based modeling (ABM), as a relatively new simulation technique, has recently gained in popularity in the civil engineering domain due to its uniquely advantageous features. Among many civil engineering applications, ABM has been applied to facility operation and management, such as energy consumption management, as well as the enhancement of maintenance and repair processes. The former studies used ABM to manage energy consumption through simulating human energy-related behaviors and their interactions with facilities, as well as electrical, heating, and cooling systems and appliances, while the latter used ABM to enhance maintenance process through facilitating coordination, negotiation, and decision making between facility managers, service providers, and repair workers. The present study aims to provide a short qualitative review on the most recent applications of ABM in the above-mentioned areas. Based on the review and follow-up analysis, the study identifies the advantages, disadvantages, and limitations of ABM applications to facility operation and management, and offers several potential future research topics in the hope of filling the existing literature gaps.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.255-259
• /
• 1995

Improvement in potential Crop yield could be achieved through either the improve-ment of source potential or sink capacity, but preferably both simultaneously. The field experiment was performed to evaluate the genotypic difference in partitioning of dry matter into each plant part in response to photosynthetic manipulation as well as to assess whether the soybean yield is source or sink-limited. Four soybean genotypes, which were 'Baekunkong', 'Suwon 168', and two local soy-beans with black seed coat(hereafter referred to as the 'black soybean', 'Kangleungjarae' and 'Keumleungjarae', were grown in four different environments in which one or two layers of shading net during grain filling and two different planting densities(55,000 and 110,000 plants $ha^{-1}$) were applied to manipulate photosynthesis. Significant effects of genotype (G), photosynthetic manipulation(P), and$G^p$P were shown in top and grain dry weight. Relative grain to top dry weight was the lowest in soybean plants grown at 110,000 plants$ha^{-1}$and covered with two layers of shading net during grain filling, Evaluation of dynamic changes in shoot harvest index in response to photosynthetic manipulation treatments revealed that sink was more limited in local black soybeans than Suwon 168 and Baekunkong, indicating that the availability of photosynthate during grain filling did not limit the grain yield in local black soybeans when compared to Baekunkong and Suwon 168.oybeans when compared to Baekunkong and Suwon 168.

• BMB Reports
• /
• v.49 no.12
• /
• pp.653-654
• /
• 2016

The human reference genome, maintained by the Genome Reference Consortium, is conceivably the most complete genome assembly ever, since its first construction. It has continually been improved by incorporating corrections made to the previous assemblies, thanks to various technological advances. Many currently-ongoing population sequencing projects have been based on this reference genome, heightening hopes of the development of useful medical applications of genomic information, thanks to the recent maturation of high-throughput sequencing technologies. However, just one reference genome does not fit all the populations across the globe, because of the large diversity in genomic structures and technical limitations inherent to short read sequencing methods. The recent success in de novo construction of the highly contiguous Asian diploid genome AK1, by combining single molecule technologies with routine sequencing data without resorting to traditional clone-by-clone sequencing and physical mapping, reveals the nature of genomic structure variation by detecting thousands of novel structural variations and by finally filling in some of the prior gaps which had persistently remained in the current human reference genome. Now it is expected that the AK1 genome, soon to be paired with more upcoming de novo assembled genomes, will provide a chance to explore what it is really like to use ancestry-specific reference genomes instead of hg19/hg38 for population genomics. This is a major step towards the furthering of genetically-based precision medicine.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.10a
• /
• pp.212-213
• /
• 2004

Since the advent of man there has been a constant struggle to define social pattern, and understand ways of cultural thinking. Every culture has it's own limitations and freedoms, problems and expectations. For centuries now anthropologist, ethnographers have worked on mapping and defining these differences. These findings instigate the designers to formulate new design theories and research methodologies for drafting cultural specific solutions. The question arises 'in a cross cultural application how effective and applicable are the basic research methodologies'? Quoting one such example the 'Privacy' issue seems to be a very strong component in the Japanese culture but is often a deterring factor in allowing the 'home ethnographic study to take place effectively'. However in countries like India similar studies could have a more welcoming reaction owing to the adaptive social culture. Similarly, the high rate of 'Illiteracy' in rural India closes many doors for 'form filling' user surveys. This leads to the scope of research for understanding specific cultural traits that may effect adaptation and re-improvisation of these existing methodologies. Quite often the cultural traits of a country may lead in forming new research methodologies.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.148-158
• /
• 2020

With the limited product information available in the m-shopping context, product-naming strategies affect consumer choices by expressing the key product features or the brand's images. Given the increasing dominance of the mobile commerce in consumption across various product categories, few studies have examined the role of product naming in consumer choices in the m-shopping. In filling the research gap, this study empirically analyzes the influence of the perceived diagnosticity of product names in m-shopping on consumer attitude towards the product. Moreover, the study tests the moderating influences of the individual characteristics of consumers (i.e., age, gender, and m-shopping experience) in the dynamics of the perceived diagnosticity impacting the product evaluations. The results of the study using an online survey reveal that the perceived diagnosticity of the product names significantly increases consumer attitude towards the product. Additionally, the moderating effects of gender, age, and m-shopping experience are all found significant: (1) The positive influence of the perceived diagnosticity of the product names is greater for males than for females. (2) The older the respondent, the more statistically significant the positive influence on diagnosticity. (3) The more respondents having m-shopping experience, the more positive the impact of the diagnosticity. Implications and limitations of the study are discussed.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.364-373
• /
• 2009

In this paper, we suggest the method for constructing parameterized human body model which has any required body sizes from 3D scan data. Because of well developed 3D scan technology, we can get more detailed human body model data which allow to generate precise human model. In this field, there are a lot of research is performed with 3D scan data. But previous researches have some limitations to make human body model. They need too much time to perform hole-filling process or calculate parameterization of model. Even more they missed out verification process. To solve these problems, we used several methods. We first choose proper 125 3D scan data from 5th Korean body size survey of Size Korea according to age, height and weight. We also did post process, feature point setting, RBF interpolation and align, to parameterize human model. Then principal component analysis is adapted to the result of post processed data to obtain dominant shape parameters. These steps allow to reduce process time without loss of accuracy. Finally, we compare these results and statistical data of Size Korea to verify our parameterized human model.

• Restorative Dentistry and Endodontics
• /
• v.46 no.3
• /
• pp.38.1-38.13
• /
• 2021

The elimination of endodontic biofilms and the maintenance of a leak-proof canal filling are key aspects of successful root canal treatment. Several materials have been introduced to treat endodontic disease, although treatment success is limited by the features of the biomaterials used. Silver nanoparticles (AgNPs) have been increasingly considered in dental applications, especially endodontics, due to their high antimicrobial activity. For the present study, an electronic search was conducted using MEDLINE (PubMed), the Cochrane Central Register of Controlled Trials (CENTRAL), Google Scholar, and EMBASE. This review provides insights into the unique characteristics of AgNPs, including their chemical, physical, and antimicrobial properties; limitations; and potential uses. Various studies involving different application methods of AgNPs were carefully examined. Based on previous clinical studies, the synthesis, means of obtaining, usage conditions, and potential cytotoxicity of AgNPs were evaluated. The findings indicate that AgNPs are effective antimicrobial agents for the elimination of endodontic biofilms.

• International Journal of Quality Innovation
• /
• v.9 no.1
• /
• pp.1-21
• /
• 2008

A Purpose. As organizations become more team oriented, research on teams continues to increase especially involving how teams contribute to organizational performance and effectiveness. Although there has been existing research on Kaizen teams in the private sector, very little research has included Kaizen teams in the public sector. In this paper, we present a method to study Kaizen teams in a local Spanish government that have been using Kaizen teams for more than ten years. Design/methodology/approach. Quantitative research was adopted for this study. Twenty teams participated in the study by filling out the Team Learning and Development Inventory (TLI) proposed by Lingham (2004). In addition, we interviewed members of the teams in order to clarify and assure our quantitative results. Findings Based on the findings, we propose that Kaizen teams should practice both Continuous (CI) and Process Improvements (PI) in their projects. We also propose that Kaizen teams should not be teams skilled only at developing better improvement processes (both CI and PI) for the organization but that such teams should also be skilled at engaging in team development using both CI and PI processes internally-a Kaizen within Kaizen teams approach. Research limitations. Its based in one case study. However, it is working paper and the research project still is developing. Practical Implications (if possible). Serve as a guide to practitioners (Public managers) who desire to understand how their Kaizen teams involves both internal (conversational spaces) and external (methodology) perspectives that would contribute to both team and organizational effectiveness. In this paper, we focus on the Internal Processes (both CI and PI) using the TLI as an effective method for Kaizen teams to engage in the Kaizen process. Originality/value. This study is one of the first to look at team's performance using Team Learning and Development Inventory in Spain's public sector. It is also the first to mention about the relationship of the team's performance and the implementation of process improvement methodologies in Spain local government environment.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.161-172
• /
• 2014

Hydrogen, which can be produced from abundant and widely distributed renewable energy resources, seems to be a promising candidate for solving the concerns for improving energy security, urban air pollution, and reducing greenhouse gas emissions. The two primary motivating factors for hydrogen economy are fossil fuel supply limitations and concerns about global warming. But the safety issues associated with hydrogen economy need to be investigated and fully understood before being considered as a future energy source. Limited operating experience with hydrogen energy systems in consumer environments is recognised as a significant barrier to the implementation of hydrogen economy. To prevent unnecessary restrictions on emerging codes, standards and local regulations, safety policies based on real hazards should be developed. This article studies briefly the direct impact-distances from hazard events such as hydrogen release and jet fire, and damage levels from hydrogen gas explosion in a confined space. Based on the direct impact-distances indicated in the accident scenarios and consumer environments in Korea, the safety policies, which are related to hydrogen filling station, hydrogen fuel cell car, portable fuel cell, domestic fuel cells, and hydrogen town, are suggested to implement hydrogen economy. To apply the safety policies and overcome the disadvantages of prescriptive risk management, which is setting guidance in great detail to management well known risk but is not covering unidentified risk, hybrid risk management model is also proposed.