• 제목/요약/키워드: Filling Phenomenon

검색결과 87건 처리시간 0.029초

Experimental study on characteristic of sloshing impact load in elastic tank with low and partial filling under rolling coupled pitching

  • Wu, Wenfeng;Zhen, Changwen;Lu, Jinshu;Tu, Jiaoyang;Zhang, Jianwei;Yang, Yubin;Zhu, Kebi;Duan, Junxian
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제12권1호
    • /
    • pp.178-183
    • /
    • 2020
  • A series of experiments covering lowest three natural frequencies of rolling coupled pitching were conducted to investigate liquid sloshing with low liquid depth. The test results show that the most violent liquid sloshing in rolling and pitching is located in the vicinity of the first order natural frequency (f1). When the excitation frequency of rolling and pitching is located between 0.98f1 and 1.113f1, roof-bursting phenomenon of liquid appeared, and the maximum impact pressure is at 1.09f1. When the external excitation frequency is at 1.113f1, the number of sloshing shocks decreases sharply. Furthermore, the space distribution of the impact pressure on the left bulkhead and the top bulkhead was analyzed. It is concluded that with low liquid filling, the impact load is greater near the free surface and the top of tank, and the impact position of the side bulkhead increases with the increasing of the frequency near the resonant frequency.

비개착식 지반공동 긴급복구를 위한 충전재료 개발에 관한 기초 연구 (Fundamental study on the development of Filling materials for Trenchless Emergency Restoration of Ground cavity)

  • 유남재;한중근;이강일
    • 한국지반신소재학회논문집
    • /
    • 제16권2호
    • /
    • pp.97-107
    • /
    • 2017
  • 최근 도심지에서 지반함몰이 많이 발생하고 있으며 복구작업시 현장 주변 통제로 매우 복잡하고 불편하고 복구대책 공법으로 그라우팅 및 흙메우기 공법이 적용되고 있지만 지반 내 지하수위의 존재 및 공동상태에 따라 재료분리 현상이 발생하거나 많은 양의 복구재료가 요구되는 경우가 많고 지하수의 흐름에 따라 지반 내에서 유실되는 경우도 발생하고 있어 본 연구는 도심지에서 지반함몰이 발생하고 신속하게 복구하는 것을 목표로 지반공동의 긴급보강을 위해 비개착식 공법에 적용할 파우치형 충전재를 개발하는 것으로 지하수의 온도에 따라 충전재의 압축강도 및 팽창비가 다른 것과, 알루미나 파우더의 혼합을 통해 압축강도와 팽창률을 조절할 수 있음을 확인했다.

액체수소 충전 비율에 따른 액체수소 연료탱크의 내부 압력 거동 비교 (Comparison of the Internal Pressure Behavior of Liquid Hydrogen Fuel Tanks Depending on the Liquid Hydrogen Filling Ratio)

  • 최동국;이수용
    • 항공우주시스템공학회지
    • /
    • 제18권3호
    • /
    • pp.8-16
    • /
    • 2024
  • 수소는 매우 낮은 밀도를 갖기 때문에 화석연료와 동일한 수준의 에너지량을 저장하기 위해서는 기존과 다른 저장방식이 요구된다. 수소의 밀도를 높이는 방법으로는 수소를 액화하여 저장하는 방법이 있다. 하지만, 수소의 액화온도는 -252 ℃의 극저온이기 때문에 외부 열 유입에 의해 쉽게 기화된다. 액체수소가 기화되면 탱크 내부의 압력이 증가되는 자가증압 현상을 발생하므로, 탱크 설계 시 이 상승하는 압력을 잘 예측해야 한다. 따라서, 본 논문에서는 극저온 액체수소 연료탱크의 액체수소 충전 비율에 따른 내부 압력을 예측하였다. 탱크 내부의 압력 상승을 예측하기 위하여 1차원 열역학적 모델을 적용하였다. 열전달 모델은 열 유입, 액체수소의 기화, 연료 배출에 현상이 고려되었다. 최종적으로 연료탱크 내의 액체수소의 충전 비율에 따라 압력 상승 거동과 최대 상승 압력에 큰 차이가 있음을 확인하였다.

Identification of Mechanical Parameters of Kyeongju Bentonite Based on Artificial Neural Network Technique

  • Kim, Minseop;Lee, Seungrae;Yoon, Seok;Jeon, Min-Kyung
    • 방사성폐기물학회지
    • /
    • 제20권3호
    • /
    • pp.269-278
    • /
    • 2022
  • The buffer is a critical barrier component in an engineered barrier system, and its purpose is to prevent potential radionuclides from leaking out from a damaged canister by filling the void in the repository. No experimental parameters exist that can describe the buffer expansion phenomenon when Kyeongju bentonite, which is a buffer candidate material available in Korea, is exposed to groundwater. As conventional experiments to determine these parameters are time consuming and complicated, simple swelling pressure tests, numerical modeling, and machine learning are used in this study to obtain the parameters required to establish a numerical model that can simulate swelling. Swelling tests conducted using Kyeongju bentonite are emulated using the COMSOL Multiphysics numerical analysis tool. Relationships between the swelling phenomenon and mechanical parameters are determined via an artificial neural network. Subsequently, by inputting the swelling tests results into the network, the values for the mechanical parameters of Kyeongju bentonite are obtained. Sensitivity analysis is performed to identify the influential parameters. Results of the numerical analysis based on the identified mechanical parameters are consistent with the experimental values.

암으로 자녀를 잃은 가족의 경험에 대한 질적연구 (The Experience of the Family Whose Child Has Died of Cancer)

  • 이정섭;김수지
    • 대한간호학회지
    • /
    • 제24권3호
    • /
    • pp.413-431
    • /
    • 1994
  • The purpose of this study was to build a substantive theory about the experience of the family whose child has died of cancer The qualitative re-search method used was grounded theory. The interviewees were 17 mothers who had cared for a child who had died of cancer Traditionally in Korea, mothers are the care givers in the family and are considered sensitive to the family's thoughts, feelings. The data were collected through in-depth interviews by the investigator over a period of nine months. The data were analyzed simultaniously by a constant comparative method in which new data are continuously coded into categories and properties according to Strauss and Corbin's methodology. The 16 concepts which were found as a result of analyzing the grounded data were, -left over time, the empty place, meaninglessness, inner sadness, situational sadness, heartache, physical pain, guilt, resentment, regret, support / stigmatization, finding meaning in the death, changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. Five categories emerged from the analysis. They were emptiness, consisting of left over time, the empty place and meaninglessness ; sadness, consisting of inner sadness and situational sadness ; pain, consisting of heartache and physical pain ; bitterness, consisting of guilt, resentment, regret, sup-port / stigmatization and finding meaning in the death : and transition, consisiting of changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. These categories were synthesized into the core concept, -the process of filling the empty space. The core phenomenon was emptiness. Emptiness varied with the passing of time, was perceived differently according to support / stigmatization and finding meaning in the death, was followed by sad-ness, pain, and bitterness, and finally resulted in changes in attitudes about life and living and about health, and in changes in religious practice and family relations. The process of filling the empty space proceeded by ① accepting realty, ② searching for the reason for the child's death, ③ controlling the bitter feelings, ④ reconstructing the relationships ameng death, illness and health and ⑤ filling the emptiness by resolving causes of child's death, adopting, having another child or with work. Six hypotheses were derived from the analysis. ① The longer the bereavement, the mere the empty space becomes filled. ② The longer the hospitalization, the more sup-port the family needs. ③ The more the sadness, pain and bitterness are expressed, the mere positive changes emerge. ④ Family support faciliates the process of filling the empty space. ⑤ Higher family cohesiveness faciliates the process of filling the empty space. ⑥ The greater the variety of reasons attributed to the child's death, the greater the variety of patterns of change. Four propositions related to emptiness and bitter-ness were developed. ① When the sense of emptiness is great and bitterness is manifested by severe feelings of guilt and resentment, the longer the process of fill-ing the empty space. ② When the sense of emptiness is great and the family is highly motivated to get rid of the bitterness, the shorter the process of filling the empty space. ③ When the sense of emptiness is less and bitter-ness is manifested by severe feelings of guilt and resentment, the process of filling the empty space is delayed. ④ When the sense of emptiness is less and the family is highly motivated to get rid of the bitterness, the process of filling the empty space goes on to completion. Through this substantive theory, nurses under-stand the importance of emptiness and bitterness in helping the family that has lost a child through cancer fill the empty space. Further research to build substantive theories to explain other losses may con-tribute to a formal theory of how family health is restored after human tragedies are experienced.

  • PDF

케스케이드 방식 압축시스템 기반의 수소충전소에 대한 정성적 위험성평가 (Consequence Analysis of Hydrogen Filling Stations based on Cascade Compressing Systems)

  • 안병준;임종국
    • 한국가스학회지
    • /
    • 제25권2호
    • /
    • pp.13-21
    • /
    • 2021
  • 최근 수소자동차 보급의 확대로 수소충전소의 설치가 점차 확대될 예정이다. 본 연구에서는 수소충전소의 최악의 상황을 가정한 시나리오를 기반으로 피해규모를 예측하고 보다 안전한 설계형태를 제안하고자 한다. 피해규모 예측 방법은 전산유체역학(CFD)을 이용한 Flacs solver를 사용하였으며 이전 연구자의 실험 결과와 비교하여 정확성을 검증하였다. 피해규모 예측은 수소누출과 폭발에 대해서 실시하였으며, 예측 대상은 실측치를 기반으로 한 KR model로 하였다. 그리고 비교검토 모델로는 천정이 없는 형태인 Roofless model을 선정하였다. 두 모델에 대하여 분석한 결과 KR model에서는 내부가 60 vol% 이상까지 수소가스가 누적·체류되는 현상을 확인 할 수 있었던 반면, Roofless model의 경우에는 누출 후 벽면을 타고 충전소 외부로 방출·확산되는 현상을 확인 할 수 있었다. 결론적으로 국내에 표준모델로 보급·확산되고 있는 수소충전소 모델보다는 천정이 없는 수소 충전소 형태가 안전상 유리한 것으로 검토되었다.

Electroforming을 이용한 PDP용 EMI 메시 개발 (EMI Mesh Development for the PDP using Electroforming)

  • 권혁홍;범민욱;임성룡;황춘섭;박동식;이태환
    • 한국생산제조학회지
    • /
    • 제20권1호
    • /
    • pp.108-113
    • /
    • 2011
  • There are a lot of PDP TV for a plasma discharge pulse voltage generated by the use of electromagnetic waves. EMI mesh film is near Infrared ray caused by malfunction of the remote control intended to prevent this phenomenon. In this study, the formation of fine pattern by making the mold is imprinted on the film sheet. EMI mesh film has been granted by filling in the conductive material region imprinted with electroforming in the manufacture of resistance. The fine patterns fabricated with electroforming facility thickness of homogenization process technology were established to optimize the working conditions.

단부형상을 갖는 무배향/일방향 복합적층판의 압축성형에 있어서 3차원 유한요소해석 (Three-Dimensional Finite Element Analysis for Compression Molding of Step-Type Random/Unidirectional Polymer Composite Laminates)

  • 송강석;채경철;김이곤
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 1999년도 추계학술발표대회 논문집
    • /
    • pp.101-106
    • /
    • 1999
  • Fiber reinforced plastic composites is widely used to make be lightening of aircraft and automotive owing to having high specific strength and specific modulus. And it is very important to know a charge shape in order to have good products in the compression molding. In particular, the product such as a bumper beam is composed of the random and unidirectional composite mats. Its deformation and charge shape are very different by stack type of random and unidirectional mats. In this paper, the characteristics of flow fronts such as a bulging phenomenon for step-type random/unidirectional composite mats and slip parameters are studied numerically. And the effects of viscosity ratio and stack type on the mold filling parameters are also discussed.

  • PDF

무배향/일방향 섬유강화 적층매트를 갖는 플라스틱 복합판재의 압축변형 해석 (Deformation Analysis for Compression Molding of Polymeric Composites with Random/ Unidirectional Fiber-reinforced laminates)

  • 조선형
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 춘계학술대회논문집
    • /
    • pp.188-194
    • /
    • 1999
  • Fiber reinforced composite materials are widely used in automotive industry to produce parts that are large, thin. lightweight. strong and stiff. It is very important to know a charge shape in order to have good products in the compression molding. In particular, the product such as a bumper beam is composed of the random and unidirectional fiber mats. This study analyzes numerically the characteristics of flow fronts such as a bulging phenomenon made by changing viscosity of random mat and unidirectional fiber mat and slip parameters. And it is discussed that the effect of ratio of viscosity A and stack type on mold filling parameters

  • PDF

펄스 방전에 의한 충격파 발생 시뮬레이션 (Simulation of Shockwave Developed by Pulse Discharge)

  • 이승래;박현구;김태훈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.912-921
    • /
    • 2009
  • Pulse-discharge technology (PDT) is an innovative technology which uses enormous energy developed by electric discharge for a very instant moment of time. Lately, it has been applied to make expanded sections at the ends of piles and anchors. The expanded section is formed by the deformation of bore-hole induced by shockwave energy developed in filling material by the pulse discharge. In this study, considering the phenomenon of pulse-discharge as an underwater explosion, finite element analyses were carried out to model the shockwave development by pulse discharge. The simulation technique was verified by comparing results with underwater discharge test results.

  • PDF