• 제목/요약/키워드: Filling Factor

검색결과 220건 처리시간 0.026초

수평 구동형 정전 반발력 마이크로엑추에이터의 Creeping 유동 모델에 의한 공기 감쇠 (Air Damping Evaluation for Laterally Driven Electrostatic Repulsive-Force Microactuators Using Creeping Flow Model)

  • 이기방;서영호;조영호
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권11호
    • /
    • pp.581-588
    • /
    • 2001
  • This paper presents theoretical and experimental study on the quality-factor of the laterally oscillated electrostatic microactuator, driven by a lateral repulsive-force generated by the asymmetry of planar electric field. The quality-factor of the repulsive-force microactuator using a creeping flow model of the ambient air is evaluated. By filling the simulation results of damping force, we evaluate the dimensionless damping force, $\alpha$, thereby obtaining an analytical damping force, F, in the form of $F=\mu\; \alphaUL,\; where\; \mu,$ U and L denote the air viscosity, the velocity and the characteristic length of the movable electrodes. The measured quality-factor increases from 12 to 13 for the DC bias voltage increased from 60V to 140v. The theoretical quality-factor estimated from the creeping flow model increases from 14.9 to 18.7. Characteristics of quality-factor of the repulsive-force microactuator have been discussed and compared with those of the conventional attractive-force microactuator.

  • PDF

플라이애시의 활성도지수 평가에 관한 기초적 연구 (Fundamental Study on Evaluation method of Activity Factor of Fly Ash)

  • 박상준
    • 한국건축시공학회지
    • /
    • 제8권5호
    • /
    • pp.59-65
    • /
    • 2008
  • In the evaluation method of KS on the activity factor of fly ash, same amount of cement should be replaced with fly ash. Therefore, contradictory effects on concrete strength exist, i. e. strength decease due to low content of cement and strength increase of strength due to filling-pore-function of fly ash. European Committee for Standardization (CEN) specifies the method 1 to 4. adding fly ash without reducing the content of cement, for the evaluation method on activity factor of fly ash. This study investigates the applicability of the method 2 of CEN to mix design of concrete. The followings are derived ; There is a key ratio of f)y ash mixing which enhances the incremental ratio of mixing water to improve fluidity of mortar. The incremental ratio of mixing water is maximized about 11% ratio of fly ash mixing. Compressive strength most slightly increases at that ratio of fly ash mixing. Activity factor of fly ash increases as water-cement ratio becomes low and contents of fly ash becomes high. Moreover, quality of fly ash and condition of mix design affect the applicable amount of fly ash and available range of water-cement ratio. However, this method has some problems for practical purpose because activity factors of fly ash for some cases are over 1.0. Further research should be conducted to develop more useful method of evaluating activity factor of fly ash.

자기공명 검사시 코일 내 filling factor 증가를 통한 신호대 잡음비의 향상에 관한 연구 (A research on improving signal to noise ratio for magnetic resonance imaging through increasing filling factor inside surface coil)

  • 최관우;손순룡
    • 한국산학기술학회논문지
    • /
    • 제13권11호
    • /
    • pp.5299-5304
    • /
    • 2012
  • 인체는 공기, 지방, 근육, 뼈, 혈관과 같이 서로 다른 조직으로 구성되어 있어 각 조직간 자화율 차이로 인해 자장의 불균일이 항상 발생하여 신호가 감소한다. 이에 본 연구에서는 서로 다른 조직으로 구성된 인체의 신호감소를 해결하기 위하여 인체의 조직밀도와 유사한 실리콘을 이용하여 공기와 맞닿은 굴곡진 부분에 보상함으로써 자기공명영상의 신호를 높이고자 하였다. 특별한 증상이 없는 성인 8명으로 대상으로 하였으며, 인체 중 굴곡이 많고 구조가 복잡해 신호감소가 많이 발생하는 발을 설정하였다. 영상은 종족궁의 가운데부터 5개의 말절골을 포함하여 얻었으며, 중족골 및 족지골을 연장한 선에 평행하게 30절편을 얻었다. 측정은 실리콘의 적용 전 후 뼈와 연부조직의 SNR을 비교하였으며, 대응표본 T검정을 이용하여 통계분석 하였다. 연구결과 뼈와 연부조직의 T1, T2 강조영상 모두 실리콘 적용 후가 적용 전에 비해 SNR이 월등히 높게 나왔으며 유의한 양의 상관관계로 증가하였다. 결론적으로 본 연구는 체적소에 영향을 주지 않으면서 코일내 인체의 부피를 늘린 획기적인 개선 방법으로, 본질적 문제인 체적소의 부피나 균일성 저하를 해결하여 SNR을 높일 수 있었다.

자기공명영상검사 시 신호강도를 높이기 위한 보상물질의 간접부착 방식에 관한 연구 (A Study on Indirect Attachment Method of Compensation Materials to Increase Signal Intensity in Magnetic Resonance Imaging)

  • 손순룡
    • 한국콘텐츠학회논문지
    • /
    • 제17권7호
    • /
    • pp.437-442
    • /
    • 2017
  • 최근 자기공명신호를 형성시키지 않는 보상물질을 이용하여 신호강도를 높이려는 연구가 활발히 진행되면서 검사부위에 보상물질을 직접 부착함에 따른 환자감염의 우려가 나타나고 있다. 이에 본 연구에서는 발상의 전환으로 보상물질을 코일에 간접 부착함으로써 기존의 직접 부착방식을 대체할 수 있는지 알아보고자 하였다. 연구방법은 보상물질인 실리콘을 원통형 bar의 형태로 제작하여 8채널 head 코일의 element에 부착한 후, 실리콘 부착 전 후 water phantom의 신호강도를 측정하였다. 영상획득은 3.0T 초전도 자기공명영상장치와 8채널 head 코일을 이용하여 T1, T2강조영상을 획득하였으며, 획득한 영상은 영상측정프로그램을 이용하여 신호강도를 측정한 후, 대응표본T검정을 이용하여 유의한 차이가 있는지 판단하였다. 부착 전 후 신호강도는 T1 강조영상은 3.39%, T2 강조영상은 2.62% 유의하게 증가하였다. 결론적으로 간접 부착방식은 증가율이 낮아 모든 환자를 대상으로 대체하기에는 한계가 있을 수 있지만, filling factor의 증가로 인한 신호강도의 의미있는 상승이 있으므로 당뇨병 등 감염성 질한 우려 환자에 적용 시 유용하리라 판단된다.

남부평야지에서 적미 품종의 이앙시기에 따른 폴리페놀 함량 및 수량변이 (Polyphenol Content and Yield Variation of Red-colored Cultivars Depends on Transplanting Date in Southern Plain Region of Korea)

  • 배현경;오성환;황정동;서종호;김상열;오명규
    • 한국작물학회지
    • /
    • 제62권3호
    • /
    • pp.166-171
    • /
    • 2017
  • 본 실험은 적미의 재배에 있어서 고품질 고수량을 위한 적정이앙시기를 구명하기 위해 네 품종의 적미를 재료로 2015~2016년에 밀양에서 실시하였다. 1. 수량구성요소 중 이앙시기 변화에 따라 가장 크게 달라지는 요인은 등숙률이었고 6월 20일 이후 이앙하면 등숙률이 낮아져 현미수량이 하락하였다. 2. 6월 20일에 이앙했을 때 폴리페놀 함량과 현미수량을 종합한 폴리페놀 생산량이 2,341~3,349 g/10a로 가장 높았다. 3. 출수 후 30일간 평균온도가 낮을 수록 폴리페놀 함량은 증가하였으나 일정 수준 이하로 온도가 떨어지면 현미수량이 감소하였기 때문에 $22{\sim}23^{\circ}C$ 정도가 고품질 고수량 적미를 생산하기에 가장 적정한 온도였다. 4. 출수 후 30일간 평균온도가 $22{\sim}23^{\circ}C$가 되는 시점을 최적 출수기로 하고 출수소요적산온도를 $1,660^{\circ}C$로 하여 계산한 최적 이앙시기는 밀양시가 6월 18일~6월 24일 이었다. 경상남도 지역은 6월 중순에서 7월 초순, 경상북도 지역은 6월 초순에서 6월 중하순이 최적 이앙기였다.

Au/YBCO 박막의 안정성 해석 (Stability analysis of Au/YBCO film)

  • 김진석;설승윤
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.245-248
    • /
    • 2002
  • One dimensional conduction equation is solved by finite difference method, to analyse the stability of Au/YBCO film deposited on a sapphire substrate. Jolue heat is included in the case of current sharing state. The analysis shows the quench and recovery of superconductor depending on the amount of thermal disturbance release on the center surface of superconductor. The critical disturbance energies for different filling factor and operating current are calculated.

  • PDF

다층 배선에서 차폐효과 모델 및 스위칭에 미치는 영향 (Shielding effect model and Signal Switching in the multi-layer interconnects)

  • 진우진;어영선
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.1145-1148
    • /
    • 1998
  • New capacitance modeling and transient analysis for multi-layer interconnects with shielding effect are presented. The upper layer capacitances with under-layer shielding lines are represented by introducing a filling factor η which can be defined as the ratio of upper-layer line length to the total under-layer line width. The upper-layer effective self capacitances considering two extreme cases which the underlayer metals are assumed as a ground or as a Vdd are modeled. The signal transient analysis with shielding effect model is performed.

  • PDF

MAGNETOSPHERIC STRUCTURE OF THE INTERMEDIATE POLAR

  • Kim, Yong-Gi
    • Journal of Astronomy and Space Sciences
    • /
    • 제11권1호
    • /
    • pp.1-12
    • /
    • 1994
  • The structure of the magnetic funnel element in the intermediate polar is considered in terms of an important site for the X-ray absorption and the reemission of the X-ray as the optical light. In this paper the column density and the optical depth vary with the filling factor, which is introduced to characterize the structure of matter in the magnetic funnel element. The results of the energy dependence of the X-ray spectrum and the modulation depth of the X-ray light curve are discussed.

  • PDF

ON THE DISCREPANCY OF CORONAL MAGNETIC FIELDS IN SOLAR OPTICS AND RADIO

  • MA YUE-HuA;LI XIAO-QING
    • 천문학회지
    • /
    • 제29권spc1호
    • /
    • pp.309-311
    • /
    • 1996
  • It is analysed the discrepancy about the coronal magnetic field between solar optic and solar radio using magnetic fibril concept with filling factor and fractal structure model. The magnetic field of $\~$ 100 G considered in solar optics is mean value in a large scale, and that of $\~$1000 G in solar should be the value of fine structures inside 'macro' loop.

  • PDF