• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.59-66
• /
• 2006

The thermal properties of wood flour, Hwangto, and maleated polyethylene (MAPE) reinforced HDPE composites were investigated in this study. The thermal behavior of reinforced wood polymer composites was characterized by means of thermogravimetric (TGA) and differential scanning calorimetric (DSC) analyses. Hwangto and MAPE were used as an inorganic filler and a coupling agent, respectively. According to TGA analysis, the increase of wood flour level increased the thermal degradation of composites in the early stage, but decreased in the late stage. On the other hand, Hwangto reinforced composites showed the higher thermal stability than virgin HDPE, from the determination of differential peak temperature ($DT_p$). Decomposition temperature of wood flour and/or Hwangto reinforced composites increased with increase of heating rate. From DSC analysis, melting temperature of reinforced composites little bit increased with the addition of wood flour or Hwangto. As the loading of wood flour or Hwangto to HDPE increased, overall enthalpy decreased. It showed that wood flour and Hwangto absorbed more heat energy for melting the reinforced composites. Hwangto reinforced composites required more heat energy than wood flour reinforced composites and virgin HDPE. Coupling agent gave no significant effect on the thermal properties of composites. Thermal analyses indicate that composites with Hwangto are more thermally stable than those without Hwangto.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.105-113
• /
• 2018

Maillard reaction products like melanoidins present in industrial fermentation wastewaters are complex compounds with various functional properties. In this work, novel ultrafiltration (UF) mixed matrix membrane (MMM) composed of polysulfone (PSF) and nanocomposites was prepared through a phase inversion process for the recovery of melanoidins. Nanocomposites were prepared with acid functionalized multiwalled carbon nanotubes (MWCNTs) as the reinforcing filler for chitosan-thermoplastic starch blend. Higher nanocomposites content in the PSF matrix reduced the membrane permeability and melanoidins retention indicating tighter membrane with surface defects. The membrane surface defects could be sealed with dilute polyvinyl alcohol (PVA) solution. The best performing membrane (1% nanocomposites in 18% PSF membrane sealed with 0.25% PVA coating) resulted in uniform melanoidins retention of 98% and permeability of 3.6 L/m2 h bar over a period of 8h. This demonstrates a low fouling PSF membrane for high melanoidins recovery.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.40-41
• /
• 2020

This study has resulted in the following findings. First, Using more than 30% of GBFS to replace FA enabled bleeding control through improved fluidity. Moreover, it has been confirmed that effective strength and proper quality can be achieved when it was applied as a backfilling material with higher early strength than the base material. Second, When using more than 30% of FNS to replace sand, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Third, When using more than 30% of both GBFS and FNS in combination, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Also, it was confirmed that proper mixing of 15~60% of GF secured the effective strength and desired quality as a refiller and joint filler material.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.44-53
• /
• 2007

The Jeonju-Il mine tailings contain large quantities of $SiO_2\;and\;Al_2O_3$ and lesser quantities of metallic components. In this study, we studied about the possibility of using mine tailings as a raw material in various industries. it was found that the sintered mine tailings had a good quality in every respect such as chromaticity, firing shrinkage and water absorption etc. Therefore if can substitute clay mineral in the ceramic industry. Also it can substitute about 2.94% of the raw materials of ordinary portland cement. We can use the coarse tailing as the fine aggregate for the ready-mixed mortar; and the fine tailing, as the filler for the bituminous paving mixture; because both products were not only suitable for Korea industrial standard in quality, but also environmentally harmless.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.391-397
• /
• 2011

Purpose: The injection of various materials, including medical fillers and unregulated products, is widespread, potentially causing the development of foreign body granulomas. Should this occur on the nose, the contour deformity and inflammatory signs that result from these granulomas are aesthetically undesirable to patients. The purpose of our study is to share our experiences using different surgical approaches, depending on the affected portion of the nose, to optimize management of this challenging problem and to evaluate patient's satisfaction using our in-house questionnaire along with degree of improvement by two independent plastic surgeons. Methods: We treated 18 patients who underwent surgical excision of nasal foreign body granulomas via a perilesional approach to the lesion (n=12) or by transcolumellar incision (n=6) at our hospital over a period of seven years from March 2003 to October 2010. Nonparametric statistics were used and are presented as medians (25th-75th). Patient satisfaction was evaluated on a scale of 1 to 5 using an in-house questionnaire. All pre-and post-operative photographs were analyzed by two independent plastic surgeons. Post-operative outcomes were evaluated based on the surgeons' consensus ratings. Results: All patients receiving the transcolumellar approach reported a high level of satisfaction with the results. All but two patients who received the perilesional approach were satisfied with the outcome. No outcomes were rated as no change or worse by the consensus ratings. Conclusion: For the upper two-thirds of the nose, perilesional surgical excision can lead to substantial patient satisfaction with modified contour deformity and infection control. The transcolumellar approach resulted in better outcomes and patient satisfaction for the lower one-third of the nose.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.452-458
• /
• 2019

This study provides basic research for developing dress forms of women's wear making. This study compared the average body size of Korean women by investigating the shape, composition and size of 417 dress forms for pattern making, sold at Korean and international online malls. The results showed that Korean brands produced torso-type and torso-crotch-type (94.13%), torso-type was the most dominant type made by Japanese Ki and French St (${\geq}80%$), and all US Al products were whole-body-type. The most common used internal filler of the dress forms was urethane for South Korean companies and paper for Japanese Ki and French St. In most cases, cotton was used for outer materials. Alternatively, linen and rayon were used as outer materials. Al did not indicate the materials used for filler and outer layers. Additionally, the sizing system of dress forms was commonly presented as a Numeric type. In addition to Numeric type, Ki presented body type + usage and Al used character type. When the dress form size for the average bust size of each age group was evaluated, waist measurements were smaller than the corresponding bust measurements. Dress form was presented in the KS interval and was compared with the $mean{\pm}1{\sigma}$ interval of each age group. The majority of the dress forms produced in South Korea were for body shapes in their 20s.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.30-37
• /
• 2015

Needs for high ash loading in printing paper increase as green house gas (GHG) emission regulation becomes more stricter and pressure of lowering paper production cost increases. To meet the needs, a new type of filler was developed. The mixture of ground calcium carbonate (GCC) and calcium oxide was pre-floccuated with polyelectrolyte and further treated with carbon dioxide to form new calcium carbonate between GCCs. The final products were called as hybrid calcium carbonate (HCC), and its properties were compared to the GCC and the pre-flocculated GCC. Results showed increase in tensile, smoothness, opacity, and bulk for HCC.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.31-39
• /
• 1994

The electromagnetic shielding effectiveness of the various composite materials in the far field region is investigated using the flanged coaxial transmission line sample holder. From these results, we can determine the preference ranking of the various composite materials to use the housing materials of electronic products. These materials have different shielding performances in proportion to the types and volume fractions of metallic powders and metallic fibers included in composite materials. Therefore deter- mination of the optimum volume fraction and the choice of the suitable filler are very important in the design of shielding composites.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.85-88
• /
• 1999

We tested the limestone powder as a filler powder for the effective use of slag cement. Hydration process were investigated by measuring the thermal differential analysis(DTA), compressive strength, XRD patterns, calorimeter of slag cement-limestone powder paste prepared by mixing limestone powder-slag cement. The results obtained in this study, there were no significant difference between the cases of adding up to 5% limestone powder, but the reaction time was accelerated. Also the compressive strength was increased for adding up to 5% limestone powder. The min hydrated paste products were Ca(OH)2 and calcium silicate hydrates. In the case of mixed limestone powder peak appear tricalcium carboaluminate hydrate in the sample of 7 days hydration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.21-28
• /
• 2004

Com stalk was evaluated to verify the potential as a raw material for papermaking. The lower lignin content and higher hemicelluloses content of cornstalk than any woods were considered to be beneficial for pulping and strength properties of paper. The average fiber length of com stalk was similar to those of hardwood, but longer fiber fraction is little bit included. It was found that the refining of pulp can be eliminated because of higher hemicelluloses content and narrower fiber characteristic. Disadvantages of cornstalk pulp were lower bulk and opacity, but it can be overcome by the proper use of wood pulp and filler.