• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.153-157
• /
• 2003

Purpose: To identify injuries and profile the characteristics of injured skiers and to use this information in designing injury-prevention programs and protective equipment. Materials and Methods: Injured skiers treated at a clinic of a ski resort located in Kangwon province in Korea were reviewed from 1998 to 2001. An injury was defined as any accident occurred during alpine skiing that required medical treatment. All injured skiers were asked to fill in a questionnaire which documented the mechanism of injury, their experiences , and the slope where they were injured Results: 1197 patients experienced ski injuries over a three-year-period. The overall incidence of ski injuries was 6.4 injuries per 1000 skiers. There was a slightly higher proportion of men than women and the mean age was in the third decade. The injury rate was higher for beginners and for less difficult slopes . The sprain and ligament injuries were most common and knee injuries accounted for 30$\%$ of all ski injuries . Conclusion: In our study , ski injuries occurred more often compared with foreign reports. it was concluded that an insufficient injury prevention system, an increasing number of skiers and a growing proportion of beginners was responsible for such a result.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.53-58
• /
• 2011

Purpose: We evaluated the minimal 1 year follow-up results (shoulder stability and the clinical and functional results) for the Remplissage technique to fill a Hill-Sachs lesion. Materials and Methods: The subjects were 12 patients who could be followed up for more than 12 months after the "Remplissage" procedures in our hospital from December 2008 to November 2009. Their mean age was 27.9 years old and the mean follow-up was 19 months. The evaluations included the ROM, the ASES score, the KSSI score, the ROWE score and postoperative MRI. Results: On the postoperative functional evaluation after an average of 16 months, the ASES score improved from 50.8 preoperatively to 78.3 postoperatively, the KSSI score improved form 44.5 preoperatively to 81.0 postoperatively and the ROWE score improved from 40.2 preoperatively to 84.3 postoperatively. After an average 14 months for all the cases, the range of movement was nearly in the normal range, which is 178.6${\pm}$18.6 (165~180) degrees for forward flexion and 49.3${\pm}$10 (43~60) degrees for external rotation. Conclusion: For recurrent shoulder instability with a large Hill-Sachs lesion, the Remplissage technique has a good outcome after more than 1 year follow-up in terms of the shoulder stability and the clinical and functional results.

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.4
• /
• pp.189-195
• /
• 2019

Purpose: The aim of this study is to evaluate if the Ilizarov external fixation procedure with axial compression can help to obtain fusion across the ankle joint in patients with a high risk of nonunion. Materials and Methods: From January 2006 to December 2015, the study reviewed 17 patients who underwent ankle arthropathy with a high risk of nonunion and who underwent ankle fusion using the Ilizarov external fixator with axial compression and auto bone grafting. After the lateral surface of the ankle joint was exposed through a lateral trans-fibular approach, massive removal of the articular cartilage and excision of any loose or avascular bone were done. With the cortical bone harvested from the pelvis as corticocancellous bone blocks, we inserted the two cortical blocks longitudinally into the anterior and posterior part of the free ankle space from lateral to medial to make the rectangular chamber to fill the cancellous bones. After the Ilizarov external fixator was equipped, we tightened the frame by 5 mm to compress the bone graft space. We accessed the American Orthopaedic Foot and Ankle Society (AOFAS) AnkleHindfoot score both preoperatively and postoperatively. Results: The average age at the time of operation was 63.4 years (range, 47~78 years). The mean frame time was 17.4 weeks (range, 15~23 weeks). The average follow-up period was 3.7 years (range, 2~6 years). Osseous fusion was obtained in 15 patients (88.2%). There were two stable pseudarthroses among the rheumatoid arthritis patients, and we continued their follow-up. The mean AOFAS AnkleHindfoot score improved from 48.5 to 73.7 points. Conclusion: Ankle arthrodesis using the Ilizarov external fixation with axial compression and auto bone grafting on the ankle arthropathy that had difficult conditions to achieve union is considered one of the useful methods with a correspondingly low incidence of complications.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.13-21
• /
• 2002

Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(detached breakwater, groins and jetty). The geotextile tubes are made of sewn geosynthetics sheets. If the sandy soil is use to fill material, these inlets should be spaced closely to assure uniform filling of the tubes because sandy soil and geosynthetic is very pervious. However, the clayey soil or contaminated slurry is used, the inlets can be located relatively long distance. The fine clayey particles tend to rapidly blind the fabric slowing down water escape through the geotextile. This paper presents a field test result of a geotextile tube in the land reclamation project for the Songdo New City construction site. The dredged silty clay was dredged by the dredging ship and hydraulically pumped into the geotextile tube. The height of geotextile tube was measured at every filling stage and also measured width and diameter of geotextile tube with the elapsed time. Based on the test results, if the clayey filling material is used, the pumping step must be divided 3~4 stages for drainage and sediment. After complete drainage, the height of the geotextile tube reduces by approximately 50%.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.136-148
• /
• 2006

A foundry makes various machinery parts made by iron. For manufacturing machinery parts, they usually uses wooden mold with molding sand and pour the molten iron into wooden mold through inlet. A foundry have many processes including Furan process, In Furan process workers prepares a wooden mold in the molding sand. So they fixes wooden mold in sand housing and then they fill the molding sand in the sand housing. Molding sand should be sticky enough to sustain the shape of wooden mold, so several materials are needed to prepare the suitable molding sand. The first step of Furan process is making the molding sand with molding sand and Voltaic Organic Compounds (VOC) and the second step of Furan process is pour the molding sand into the wooden molding housing. This two step of process generated noxious VOC and various size of dust. So the process is very dirty and dangerous one. Because of these, Workers frequently shrink out of the plant. The company related with foundry usually faced on the difficult situation for engagement and always have shortage of hiring problem. Through this study, we developed a system which removes toxic VOC and dust simultaneously. We design and construct real system and install it at real plant. Before setting up this system, the working surroundings VOC (for formaldehyde) 15 ppm and Dust(for $PM_{10}$) $8,000{\mu}g/m^3$. After setting up this system, working surroundings is improved by VOC (for formaldehyde) 0 ppm, Dust(for $PM_{10}$) $4{\mu}g/m^3$, and the work evasion factor is removed. So we contribute to solve hiring problem of this company and increasing the productivity also.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2005

The stoichiometric mixture of evaporating materials for the $CuInSe_2$ single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuInSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.783\;{\AA}$ and $11.621\;{\AA}$, respectively. To obtain the $CuInSe_2$ single crystal thin film, $CuInSe_2$ mixed crystal was deposited on throughly etched GaAs(100) by the HWE(Hot Wall Epitaxy) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$ respectively. The crystalline structure of $CuInSe_2$ single crystal thin film was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.1851\;eV-(8.99{\times}10^{-4}\;eV/K)T^2/(T+153\;K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $n-CdS/p-CuGaSe_2$ heterojunction solar cells under $80\;mW/cm^2$ illumination were found to be 0.51V, $29.3\;mA/cm^2$, 0.76 and 14.3 %, respectively.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.25-36
• /
• 2018

The stoichiometric mixture of evaporating materials for the $CaAl_2Se_4$: Co single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CaAl_2Se_4$, it was found orthorhomic structure whose lattice constant $a_0$, $b_0$ and $c_0$ were 6.4818, $11.1310{\AA}$ and $11.2443{\AA}$, respectively. To obtain the $CaAl_2Se_4$: Co single crystal thin film, $CaAl_2Se_4$: Co mixed crystal was deposited on throughly etched Si (100) by the HWE (Hot Wall Epitaxy) system. The source and substrate temperature were $600^{\circ}C$ and $440^{\circ}C$ respectively. The crystalline structure of $CaAl_2Se_4$: Co single crystal thin film was investigated by the double crystal X-ray diffraction (DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CaAl_2Se_4$: Co obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.8239eV-(4.9823{\times}10^{-3}eV/K)T_2/(T+559K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $p-Si/p-CaAl_2Se_4$: Co heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.42 V, $25.3mA/cm^2$, 0.75 and 9.96%, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.251-260
• /
• 2002

Geotextile tribes are made of sewn geotextile sheet and hydraulically or mechanically filled with dredged materials. They have been applied in hydraulic and coastal engineering in recent years(shore protection structure, detached breakwater, groins, and jetty). Therefore, it is composed of geotextile and confined fill material. Recently, new preliminary design criteria supported by model and prototype tests, and some stability analysis calculations have been studied. The stability analysis of geotextile tube is composed of geotechnical and hydrodynamic analysis. The stability check points are sliding failure, overturning, bearing capacity failure against the wave attack. In this paper are presented the stability analysis method by empirical equation and 2-D equilibrium analysis for geotextile tube. Also, the hydraulic model tests were performed to verify the theoretical stability analysis with geotextile tube shape, filling ratio, significant wave height, and so on. The results of this study show that the stability of geotextile tube depends on the tube shape, contact area, projection area. The theoretical analysis and hydraulic model test show almost the same results.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.455-463
• /
• 2006

The electrical resistivity prospecting method with dipole-dipole array was applied to the Mooreung landfill site in order to survey the existence of leachate around the landfill site. Moreover, if there is leachate within Mooreung landfill site, the analysis of potential pathways to exterior environments was tried. Within the landfill site, the over-all characteristics of the electrical resistivity anomalies suggest that the leachate induced from the landfill materials has infiltrated the basement rock and fill the pores of basement rock in some parts of the landfill site. The consistency of the anomaly locations (left part of each survey line), anomaly geometries, and absolute resistivity value of anomaly through the 3 survey lines suggests that the resistivity anomaly be connected from the upstream to the downstream and correspond to the leachate material. Finally, the result from the electrical resistivity survey line near the gateway of the landfill site suggests that some of the leachate induced from landfill material leaks to the exterior groundwater system. It is necessary that more surveys using both geochemical and geophysical methods should be performed to find out potential pathways and depths of the leachate more precisely.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1999

The $n^+/p/p^+$ junction PERL solar cell of $0.1{\sim}2{\Omega}{\cdot}cm$ (100) p type silicon wafer was fabricated through the following steps; that is, wafer cutting, inverted pyramidally textured surfaces etching by KOH, phosphorus and boron diffusion, anti-reflection coating, grid formation and contact annealing. At this time, the optical characteristics of device surface and the efficiency of doping concentration for resistivity were investigated. And diffusion depth and doping concentration for n+ doping were simulated by silvaco program. Then their results were compared with measured results. Under the illumination of AM (air mass)1.5, $100\;mW/cm^2$ $I_{sc}$, $V_{oc}$, fill factor and the conversion efficiency were 43mA, 0.6 V, 0.62. and 16% respectively.