• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.659-663
• /
• 1995

The fiber oriented conditied inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to measure the fiber orientation angel for the determination of molding conditions, mechanical charactistics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine thr accuracy of intersection counting method. The fiber orientation function measured by intersection countingmethod using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the secant line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.189-199
• /
• 2008

It is good to use DEA method as it can measure the efficiency without depending on a specific function like cost function. The method also finds out the most efficient group among the sample groups and gives us a specific number. For example, it shows what kind of factor of inefficient group gives how much input and produces how much output. Originally DEA, which was developed by Charnes, Cooper and Rhodes, allows us not only to measure the relative efficiency of Decision Making Units(DMUs) of non-profit organizations whose success cannot be measured by a single bottom-line figure such as profit but also to integrate several variables, which have different measuring scale, into a single model. Therefore we can use physical scales and financial scales simultaneously in the same model without any transformation process. In this study, price and measurable performance indexes of vehicles are used as input and outputs respectively. The purpose of this study is to propose an effective approach for evaluating the relative efficiency of vehicles and to determine the vehicles have high performance efficiency compared to product cost.

• 한국의류학회지
• /
• 제22권2호
• /
• pp.203-214
• /
• 1998

The purpose of this study is to classify the upper body of women into several kinds of somatotypes, using the method of Surgical Tape and making their shells. The subjects are 53 females 30 to 39 years-old. Fifty-three anthropometric data are measured per shell of bodysurface; six somatotype factors are obtained through principal component analysis and orthogonal rotation by the method of Varimax, Somatotype of women's upper body is achieved by cluster analysis, using the standardized factor score as an independent variable and the FASTCLUS of SAS by Kmeans. The results are as follows: 1. The number of the factors which explain the somatotype is six and those factors comprise 76.12 percent of total variance. Factor 1: related to the size of shape in the front of upper body Factor S: related to the size of shape in the back of upper body Factor 3: related to the type of the upper chest over the chest circumference line Factor 4: related to the length of·the upper body Factor 5: related to the part of the neck Factor 6: related to the type of the lower chest under the chest circumference line 2. Cluster analysis results in classification of upper body into five clusters. Cluster L: the length is the largest and the circumference is small. The part of waist is the largest and widest among surface areas. Cluster 2: Slender body line from chest to waist is characteristic. The length is longer. The part of upper and lower chest is larger among surface areas. Cluster S: the circumference is the smallest and armhole is small. The length and surface area are small. Cluster 4: the circumference and armhole is the largest. The length is the smallest. Cluster 5: the circumference is average and the length is a little long. The body line(silhouette) from chest to waist is curved slightly.

• 한국지리정보학회지
• /
• 제7권2호
• /
• pp.16-28
• /
• 2004

영상 모자이크 작업에서 두 영상 간의 경계선이 보이지 않는 최적의 seam-line을 구하기 위해 화소값 차이 변환과 동적계획법 이용 알고리즘을 제안하였다. 영상 간의 경계선은 두 영상의 화소값 차이가 적은 화소를 따라 형성되는 것이 시각적 부담이 적다. 이 화소들을 연결하는 것은 최적 경로를 찾는 알고리즘을 이용할 수 있다. 최적 경로 결정에 효과적인 동적계획법을 seam-line 결정에 직접 적용하변 화소값의 차이뿐만 아니라, seam-line의 길이에 따라 영향을 받는 거리영향문제가 발생한다. 이 논문에서는 적응적 변환함수를 사용하여 비용 변환을 수행하고, 변환된 비용공간 상에서 동적계획법을 적용하여 거리영향이 억제된 최적 seam-line을 구할 수 있는 알고리즘을 개발하였다. 또한 결정된 seam-line을 평가하기 위해 일정한 개수의 상위 화소값의 차이를 누적한 값(SFBPD)을 척도로 제시하였다. 제안한 seam-line 결정방법을 다양한 종류의 영상에 대해 적용 실험하였으며, 시각적 및 SBPD 값에 의한 수치적 결과를 제시하였다.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.170-182
• /
• 1996

The purpose of this study is to classify the upper body of women into several kind.; of somatotypes, using the method of Surgical Tape and making their shells. The subjects are 50 females 20 to 29 years-old. Fifty-one anthropometric data are measured per shell of body surface : eight somatotype factors are obtained through principal component analysis and orthogonal rotation by the method of Varimax, Somatotype of women's upper body is achieved by cluster analysis, using the standardized factor score a.: an independent variable and the FASTCLUS of SAS by Kmeans. The results are as follows : 1. The number of the factors which explain the somatotype is eight and these factors comprise 81.63 percent of total variance. Factor 1 related to the degree of fatness in the front of upper body Factor 2 related to the degree of fatness in the back of upper body Factor 3 . related to the length of the upper body Factor 4 : related to the type of the upper chest over the chest circmference line Factor 5 : related to the armhole and neck Factor 6 : related to the type of lower chest under the chest circumference line Factor 7: related to the part of the back shoulder Factor 8: related to the depth of front neck and side dart of front independently 2. Cluster analysis results in classification of upper body into five clusters. Cluster 1 : the of circumference i.: lager and that of length is longer than the average The louver part of chest is the lagest and widest among surface areas. Cluster 2 : the circumference is the smallest , the length and surface area are small. The upper and lower chest is small Cluster 3 : the length and surface area are the smallest , the circumference is average. The body line (silhouette) from chest to waist is curved slightly.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.127-132
• /
• 2010

In this study, the correlation among the changes of Modulation Transfer Function(MTF) in the noise and high-contrast resolution and the change of Contrast to noise ratio(CNR) in the low-contrast resolution will be examined to investigate the estimation of image quality according to the type of algorithms. The image data obtained by scanning American Association of Physicists in Medicine(AAPM) phantom was applied to each algorithm and the exposure condition of 120 kVp, 250 mAs, and then the CT number and noise were measured. The MTF curved line of the high-contrast resolution was calculated with Point Spread Function(PSF) by using the analysis program by Philips, resulting in 0.5 MTF, 0.1 MTF and 0.02 MTF respectively. The low-contrast resolution was calculated with CNR and the uniformity was measured to each algorithm. Since the measurement value for the uniformity of the equipment was below ${\pm}$ 5 HU, which is the criterion figure, it was found to belong to the normal range. As the algorithm got closer from soft to edge, the standard deviation of CT number increased, which indicates that the noise increased as well. As for MTF, 0.5 MTF, 0.1 MTF and 0.02 MTF were all sharp algorithms, and as the algorithm got closer from soft to edge, it was possible to distinguish more clearly with the naked eye. On the other hand, CNR gradually decreased, because the difference between the contrast hole CT number and the acrylic CT number was the same while the noise of hole increased.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1827-1835
• /
• 1996

This paper addresses the problem of a torch path generation for the 2D laser cutting of a stock plate nested with resular or irregular parts. Under the constaint of the relative positions of parts enforced by nesting, the developed torch path algorithm generate feasible cutting path. In this paper, the basic object is a polygon( a many-slide figure) with holes. A part may be represented as a number of line segments connected end-to-end in counterclockwise order, and formed a closed contour as requied for cutting paths. The objective is to tranverse this cutting contours with a minimum path length. This paper proposes a simulated annealing based dtorch path algorithm, that is an improved version of previously suggested TSP models. Since everypiercing point of parts is not fixed in advance, the algorithm solves as relazed optimization problem for the constraint, thich is one of the main features of the proposed algorithm. For aolving the torch path optimization problem, an efficient generation mechanism of neighborhood structure and as annealing shedule were introduced. In this way, a global solution can be obtained in a reasonable time. Seveeral examples are represented to ilustrate the method.

• 소성∙가공
• /
• 제17권8호
• /
• pp.570-578
• /
• 2008

A flexible forming apparatus is composed a number of punches which have spherical pin tip shape instead of conventional solid die. The flexible forming tool consisted of punch array in a matrix form was proposed as an alternative forming method to substitute the conventional line heating method which use heat source to induce residual stress along specified heating lines. In this study, application of the flexible forming process to the small scale curved plate forming was conducted. Numerical simulations for both solid and flexible die forming process were carried out to compare the shape of the products between flexible and conventional die forming process. In addition, spring-back analysis was conducted to figure out the feasibility of the flexible forming process comparing with the die forming process in view of final configuration of the specimens. Moreover, experiment was also carried out to confirm the formability of the process. Consequently, it was confirmed that the flexible die forming method has capability and feasibility to manufacture the curved plates for shipbuilding.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.233-239
• /
• 2012

전력 계통에서 발생하는 고조파는 전동기 등 기기 오동작 및 고장, 불필요한 전력 소모 등을 야기시킨다. 고조파 발생에 대한 근본적인 대책은 고조파 발생 원인을 찾아 제거하는 것이며 본 논문에서는 아날로그 디바이스사의 ADE7880을 이용하여 고조파 발생 원인을 실시간으로 파악할 수 있는 전력품질 측정장치를 제작하고 동작을 검증하여 다양한 전력 품질 측정 분야에 활용할 수 있도록 하였다. 전력은 일반적으로 45Hz에서 66Hz까지의 라인 주파수를 가지고 있는데, 본 연구에서 사용한 ADE7880 필터대역인 2.8kHz 밴드 내에서 분석될 수 있는 고조파의 수는 2800/f로 최대 2800/45 = 63차 고조파까지 가능하며, 라인주파수가 60Hz인 한국에서의 최대 고조파차수는 2800/60 = 46차까지 측정할 수 있었다. 또한 전압, 전류, 전력 측정의 정확도는 0.1%이내의 오차를 가져 매우 정밀한 수준임을 확인하였다.

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.103-120
• /
• 2006

In this study, we investigated the growth rate on the basis of the sex and the year among the subjects of the licensed dental technicians from the year 1970 to 2003 in Korea. In line with this investigation, this study aims to provide a basic material with regard to the state of dental technician workforce by sex and to suggest a need to reassignment of workforce by sex in accordance with the specific job description. The results of the study are as follows; First, among the licensed dental technicians from 1970 to 2003, males came to 11,589 and females, 5,976, which shows the number of males are 1.9 times higher than that of females. To put the mean sexual composite from 1970 to 2003, male was 82.9% and female 17.1%, indicating the number of males are 4.8 higher than that of females. Second, Of the mean increasing rate until the year 2003 in contrast to 1970, male was about 351 and female was about 181, which shows the number of males increased 1.94 times higher than the females. Comparing to the mean increasing rate of the last year, female came to 25.56% and male 10.73%, which reveals that the females were about 2.4 times higher than the males. In the case of the growth rate, females increased by 1,196,20 times and the males, 26,41. As a result the growth of females are about 45.3 times higher than the males. Third, in the case of the growth rate from 1980 to 2003, females came to 47.85 times and males 9.16, which shows the growth rate of the females was about 5.2 times higher than the males. In contrast to the year 1987, the growth rate until 2003 shows that the females came to 5,13 times and the males 2.70, which indicates the growth rate of females was about 1.9 times higher than males. Fourth, Compared to the year 1990, the growth rate until 2003 shows that females came to 3.40 times and males 2.03 indicating the growth rate of the females was about 1.7 times higher than males. In contrast to the year 2000, the growth rate till 2003 shows that females was 1,34 times and males 1.15 times increased. Fifth, the ratio of sex by the year among the licensed dental technicians is as follows; ratio of male to female in 1970 was 91.2 to 1. In 2003 the ratio came to 2.0 to 1. The number of growth by sex in 1970 came to 24.0 males to 1 female. But the figure was equalled in 2003.