• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.79-83
• /
• 2008

With excellent mechanical properties and durability of concrete and construction materials so far because, as has been the most widely used. However, existing in the electrical conductivity of the concrete material is given the characteristics of the concrete can not expand a lot of applications. For example, the cathode material of a parameter, ground resistance materials, electromagnetic shielding materials, sense of self-diagnostic materials, and anti-static materials are available. Currently, research on the electromagnetic shielding and absorbing mortar is incomplete. And Japan, the United States is part of the research in research institutions. Therefore, this research rate in the mouth in a different mix of conductive graphite particle the physical properties of cement mortar about the basic performance characteristics of the robbery was to figure out.

• Journal of the Korean Geophysical Society
• /
• v.8 no.3
• /
• pp.123-130
• /
• 2005

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure zone resulted from weathering effect and other factors. The FBG sensor system is used to estimate the correlations between the temperature and the slope in Kimhae, and to find a failure zone in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the correlation. For instance, the zone of high temperature fluctuation can be regarded as one of the possible sliding zone due to the weathering effect while the constant temperature depth of the ground, if exists would not be relatively affected by the weathering process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.464-469
• /
• 2000

Since the occurrence of 1995 Kobe earthquake, there have been much concern about seismic design for various infrastructures, inclusive of bridge structures. This research aims at evaluating the seismic performance of the existing R/C bridge piers, which were nonseismically or seismically designed in accordance with the provision of Korea Highway Design Specification. Further experimental investigations have been doing to figure out the retrofitting effects of nonseismic R/C bridge piers confined with glass fiber at the plastic hinge zone. Pseudo-dynamic tests have been carried out in nine scaled R/C column specimens to investigate their hysteretic behavior under earthquake loading. Test parameters are axial load, input ground motion confinement steel ratio, glass fiber and etc.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.9-16
• /
• 1997

A 23GHz 1-stage LNA was designed by using new topology of coupled line type with EEsof softwares and modified by using MPIE numerical analysis. The parallel coupled filter-type matching sections give impedance matching and DC blocking simultaneously, and have small discontinuities. This matching scheme has simple structure in the design process and give small error. The EFT chip was directly attached to the ground metal. The designed LAN gives 6.2dB gain and 2.5dB noise figure without considering the loss of connectors. Through these results, it was verified that our design process, matching schemes and fabrication technologies was valied for developing 20GHz-band LNA.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.169-171
• /
• 2012

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity per unit time, the coefficient figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-coefficient table for a Tub Grinder, domestic and overseas documentary records were investigated and on-going construction sites were also visited. The research found that the table can be revised by means of detailing down by several factors. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.117-122
• /
• 2010

The shock performance of hard disk drives has been a serious issue for Car PC. Since the vibration and disturbances from a car gives an adverse effect on a HDD of Car PC, it is necessary to protect a HDD from them. In this study, passive vibration attenuation system for a vehicle HDD was developed. Acceleration from the ground through the tire and suspension system was measured to figure out the frequency translated to Car PC. Critical frequency to Car PC was determined by exciting it with a shaker and measuring a data transmitting speed from HDD. A newly designed vibration attenuation system was fabricated to protect HDD from the acceleration. It was shown that the developed system had an excellent vibration attenuation ability.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.604-609
• /
• 2005

Runoff characteristics of organic matters and nutrients from greenhouse site in paddy field area were investigated during the irrigation period in 2004. The greenhouse selected which situated near the Nam river, Jinju, Korea used the ground water as the irrigation purpose. And, the rotating system of paddy field to upland was adapted as a cropping system which is a typical practice in this area. Various items such as total phosphorus(T-P), total nitrogen(T-N), dissolved oxygen(DO), BOD, etc. were observed to figure out the seasonal and spatial variation in the study sites. it was found that the risk of water pollution due to the contamination of nutrients in canals in green house sites, and their neighbouring small sized streams are much higher than those in ordinary paddy field areas. Further surveys and investigations are required to find out the counter measures to reduce water pollution occurred in greenhouse sites.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.540-546
• /
• 2017

Bipedal robots tend to have greater mobility than conventional treaded or wheeled robots yet they are commonly complicated by instabilities in balance. This paper presents a bipedal robot based upon Jansen's locomotive mechanism which addresses these challenges in stability and efficiency. In order to achieve a functioning robot, we considered a multitude of variables in its motion including, the Ground Score, Drag Score, step size, foot lift, stride, and instantaneous speed of the Jansen mechanism. Matlab and Jansen Opt solver were used to optimize the legs of the robot. A trial and error experimental method was used to determine the best combination of link lengths, and m.Sketch was used to model our results. Finally, we drew the entirety of the robot's figure by using the Edison design.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.9
• /
• pp.1091-1101
• /
• 1988

In this paper, a method to segment each character and extract figure from Korean documents is proposed. At first, each character string is extracted by means of iterative horizontal propagation, shrink algorithm and run-length algorithm. Individual character region is extracted by iterative horizontal and vertical manipulation. Next, characters of right pitch are searched. Each character is segmented by the position information. Overlapped character is segmented on the ground of the width of already extracted character. The rest are extracted as special characters of half pitch. Using 9 data input in the form of 840 X 600 from Korean monthly magazine, experiment was simulated. Extraction rate of character is 100%, and that of individual character is 98%. Judging from these results, efficiency on extracting character region and segmenting individual character is proved.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.643-650
• /
• 2002

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure zone resulted from weathering effect and other factors. The FBG sensor system is used to estimate the correlations between the temperature and the slope in Yunhwajae, and to find a failure zone in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the correlation. The zone of high temperature fluctuation can be regarded as one of the possible sliding zone due to the weathering effect while the constant temperature depth of the ground, if exists, would not be relatively affected by the weathering process.