• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.304-312
• /
• 2010

This paper presents the design of alert message and message segmentation method for the Terrestrial DMB Automatic Emergency Alert Service Standard. This paper begins with the introduction of the standard and some background. The alert message contains the essential information of the alert. Structured information is represented as coded fields and the unstructured as short sentences. Design factors of each field are analyzed first. Next each field’s semantics and syntax are described. The message segmentation method is presented next. The previous study selected FIDC as the message delivery channel. However, in most cases, the size of the alert message exceeds the maximum size of FIG, which is the basic unit packet for the channel. The current T-DMB standard does not support the segmentation method for FIDC. To solve the problem, this paper proposes an elegant segmentation method that garantees reliable, flexible, and fast receiver characteristic. This paper concludes with some additional tasks that should be resolved before the full-time alert service.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.49-57
• /
• 1973

Based on the fork length data of 1960 and on the fishery statistical data of 1968, 1970 and 1971, a research was made on the migration of the Pacific saury in the waters off the eastern coast of Korea. The population is divided into four groups in terms of size as shown in Fig. 5. The four groups demonstrate more or less different pattern of migration, both temporally and spatially. Northward migration is brought out in order of size, i. e., the smaller move northward earlier than the larger do, and the order is reverse in the case of southward migration. The migration routes of each size group are presented in Fig. 8. Whether the fish takes its course to the north or the south, its distribution centroid within the fishing grounds is traced in general following the line between $130^{\circ}$ and $130^{\circ}$130^{\circ$x. long., although longitudinally a pronounced annual bias is found in its month position. The moving pattern of the distribution centroid is assumed to be related with the abundance of each group to a considerable extent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.347-348
• /
• 2013

To obtain high conversion efficiency in InGaN-based solar cells, it is critical to grow high indium (In) composed InGaN layer for increasing sun light absorption wavelength rage. At present, most InGaN-based solar cells adopt InGaN/GaN multi-quantum-well (MQW) structure for high crystalline quality of InGaN with high In composition. In this study, we fabricated and compared the performances of two types of InGaN/GaN MQW solar cells which have the 15% (SC 15) and 25% (SC 25) of In composition at quantum well layer. Although both devices showed similar dark current density and leakage current, SC 15 showed better performance under AM 1.5G illumination as shown in Fig. 1. It is interesting to note that SC 25 showed severe current density decrease as increasing voltages. As a result, it lowered short circuit current density and fill factor of the device. However, SC 15 showed steady current density and over 75 % of fill factor. To investigate these differencesmore clearly, we analyzed their photoluminescence (PL) spectra under various applied voltages as shown in Fig. 2. At the same time, photocurrent, which was generated by PL excitation, was also measured as shown in Fig. 3. Further, we investigated the relationship between piezoelectric field and performance of InGaN based solar cell varying indium composition.

• Journal of Korean Society of Forest Science
• /
• v.11 no.1
• /
• pp.25-32
• /
• 1970

Site-index curves for Pinus densiflora Sieb. et Zucc. grown in the middle part of Korea were developed from stem analysis data by a procedure of guide curve equation $Yt=K-ab^t$ (t=0, 1, 2, ${\cdots}{\cdots}$) and shown in Fig. 2. The stand density expressed as size-number criteria was calculated and the relation of number of tree per hectare and average DBH was presented in Fig. 3, in which soil fertility showed little effect. When this is compared to Reineke's density standards, the Pinus densiflora stand ranks high level of stocking density (Fig. 5). As a measure for estimating timber volume, the angle-summation technique revealed to result wider variation. Constructing hypothetical populations for appraising angle-summation technique, the significance of its application in silvicultural and ecological research are discussed.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.5
• /
• pp.433-435
• /
• 2000

A 6000-year-old male with carcinoma of the prostate and cerebral infarction underwent a Tc-99m MDP bone scintigraphy for the evaluation of skeletal metastases. Bone scintigraphy (Fig. 1) showed multiple areas of increased uptake of Tc-99m MDP in the skull, spine, and ribs representing skeletal metastases. Two different patterns of uptake occurred in the skull region (Fig. 1A-C); one represents bony metastasis and the ether represents cerebral infarction. The shape, size, location, intensity, and border of the increased uptake differed between the two lesions. An oval-shaped pattern with smaller size, greater intensity and more sharply defined border in the frontal region was consistent with bony metastasis. A rectangular-shaped pattern with larger size, lesser intensity and relatively indistinct border in the temporo-parieto-occipital region was consistent with cerebral infarction. Increased uptake of bone-seeking radiotracers in cerebral infarction has been reported previously.$^{1-4)}$ A suggested mechanism by which bone-seeking radiotracers accumulate in the necrotizing cerebral tissue is an alteration of the blood-brain barrier induced during cerebral infarction, which results in entry of the radiotracers into the extracellular space of the brain.$^{4)}$ Brain CT (Fig. 2) performed 7 days before and one month after the bone scintigraphy revealed lesions on the right temporo-parieto-occipital region consistent with acute hemorrhagic and chronic cerebral infarction, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.29-30
• /
• 2001

This paper presents some results of plasma nitriding on hard chromium deposit. The substrates were C45 steel and $30~50{\;}\mu\textrm{m}$ of chromium deposit by electroplating was formed. Plasma nitriding was carried out in a plasma nitriding system with $95NH_3{\;}+{\;}SCH_4$ atmosphere at the pressure about 600 Pa and different temperature from $450^{\circ}C{\;}to{\;}720^{\circ}C$ for various time. Optical microscopy and X-ray diffraction were used to evaluate the characteristics of surface nitride layer formed by nitrogen diffusion from plasma atmosphere inward iCr coating and interface carbide layer formed by carbon diffusion from substrate outward Cr coating. The microhardness was measured using microhareness tester at the load of 100 gf. Corrosion resistance was evaluated using the potentiodynamic measurement in 3.5% NaG solution. A saturated calomel electrode (SiCE) was used as the reference electrode. Fig.1 shows the typical microstructures of top surface and cross-section for nitrided and unnitrided samples. Aaer plasma nitriding a sandwich structure was formed consisting of surface nitride layer, center chromium layer and interface carbide layer. The thickness of nitride and carbide layers was increased with the increase of processing temperature and time. Hardness reached about 1000Hv after nitriding while 900Hv for unnitrided hard chromium deposit. X-ray diffraction indicated that surface nitrided layer was a mixture of $Cr_2N$ and CrN at low temperature and erN at high temperature (Fig.2). Anodic polarization curves showed that plasma nitriding can greatly improve the corrosion resistance of chromium e1ectrodeposit. After plasma nitriding, the corrosion potential moved to noble direction and passive current density was lower by 1 to 4 orders of magnitude compared with chromium deposit(Fig.3).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.83-87
• /
• 1965

This experiment was done to observe the morphological change of plant under the cultivation of deep ploughing and heavy fertilization with paddy rice 1963 at Seoul. A seedling of 35 days old was transplanted June 1st, in a galvanized iron pot with botton 20 cm in diameter, which was painted white inside and filled with sand mixed with fertilizers. The treatments were 15cm soil depth of normal fertilization, 30cm of fertilization twice and 45cm of fertilization thrice. Replications were three. The plant was observed on main stem Aug. 6 before heading, Sep. 12 after heading and Oct. 17 at the time of harvest at the same pot. The results are as follows. The length and the width of leaf blades of the upper part on main stem have the tendency to be big and vigorous with the deep ploughing and heavy fertilizations(Fig 1, 2, 3 and 4). The number and the size of vascular bundles of main stem is to increase when the paddy is cultivated with the method of deep ploughing and heavy fertilizations(Fig 5). The number and the weight of roots of main stem increases with deep ploughing and heavy fertilizations(Fig 6).

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.73-74
• /
• 2001

순환식 펄라이트 재배에서 오이의 양액흡수는 일사량 변화와 관계없이 단위 일사량당 흡수량이 80-100mgㆍMJ$^{-1}$까지 증가 후 일정하게 유지되어 양액흡수 지표는 전체 양액흡수량보다 단위일사량당 양액흡수량이 더 적합하였다(Fig. 1). 오이의 엽장$\times$엽폭 수치와 실측 엽면적과의 관계는 Y=-16.87＋0.987x＋5E-5x$^2$의 회귀식을 구할 수 있었으며 $r^2$=0.89의 높은 정의 상관을 보였다. NO$_3$$^{-}$ -N의 흡수량은 초기에 3mgㆍMJ$^{-1}$에서 후기 16mgㆍMJ$^{-1}$로 상승하였고 Ca는 초기에 3mgㆍMJ$^{-1}$에서 후기에 14mgㆍMJ$^{-1}$로, Mg는 초기에 1mgㆍMJ$^{-1}$에서 후기에 5mgㆍMJ$^{-1}$로 증가되었으나, 정식 후 62일 이후의 증가세가 둔화되었다. K는 초기에 5.0mgㆍMJ$^{-1}$에서 후기 18mgㆍMJ$^{-1}$로 증가되었으나 지속적인 증가를 보여주지 못하였는데 이것은 오이의 하엽 제거로 인한 결과로 생각되어진다. 그러나 P는 초기에 0.5mgㆍMJ$^{-1}$에서 후기에 3.2mgㆍMJ$^{-1}$로 지속적으로 증가되었다. S는 초기에 0.5mgㆍMJ$^{-1}$에서 중기에 6.5mgㆍMJ$^{-1}$까지 증가되다가 후기에 2.7mgㆍMJ$^{-1}$로 감소되었다(Fig. 2). 오이의 각각의 무기이온 흡수량과 가장 상관이 높았던 요소는 정식일수와 엽면적이었으며 이 두 요소와 단위일사량당 양액흡수량과는 $r^2$=0.92, 0.97로 높은 상관을 보였다(Table 1). 단위일사량당 양액흡수량을 이용한 각각의 무기이온 흡수량 회귀식은 $r^2$=0.8 이상으로 높은 상관관계를 보여 실용적 이용이 가능할 것으로 보였다(Fig. 3).

• Structural Engineering and Mechanics
• /
• v.67 no.2
• /
• pp.105-113
• /
• 2018

To improve the prediction accuracy of the strong-unloading rock slope performance and obtain the range of variation in the slope displacement, a new displacement time-series prediction model is proposed, called the fuzzy information granulation (FIG)-genetic algorithm (GA)-back propagation neural network (BPNN) model. Initially, a displacement time series is selected as the training samples of the prediction model on the basis of an analysis of the causes of the change in the slope behavior. Then, FIG is executed to partition the series and obtain the characteristic parameters of every partition. Furthermore, the later characteristic parameters are predicted by inputting the earlier characteristic parameters into the GA-BPNN model, where a GA is used to optimize the initial weights and thresholds of the BPNN; in the process, the numbers of input layer nodes, hidden layer nodes, and output layer nodes are determined by a trial method. Finally, the prediction model is evaluated by comparing the measured and predicted values. The model is applied to predict the displacement time series of a strong-unloading rock slope in a hydropower station. The engineering case shows that the FIG-GA-BPNN model can obtain more accurate predicted results and has high engineering application value.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.187-187
• /
• 2022

최근 선박의 자율운항기술이 활발하게 연구되어 오면서, 경로추종 제어 및 충돌회피 등의 자율운항 기술 연구가 많이 진행되고 있으며 그에 따른 시뮬레이션과 실해역 시험 등도 활발하게 수행되고 있다. 이러한 자율운항기술 중 본 연구에서는 AUV(Autonomous Underwater Vehicle) 진회수 시 모함에 활용되며 쌍동선형을 갖는 쌍동형 무인수상선을 대상으로 경로추종 제어에 대한 실해역 시험을 수행한 내용을 소개한다. 대상선인 쌍동형 무인수상선은 배수량이 약 10ton, 최대속도 10knots를 기준으로 설계된 선형이며 Sail drive 타입의 쌍축 추진기를 탑재하고 있으며 Fig. 1에 나타내었다. 실해역 시험은 경기도 화성시에 위치한 제부마리나 전면 해역에서 여러 속도에 대해 Fig. 2의 경로(빨간색)를 활용하여 수행되었다. 해당 경로는 변침각이 45도까지 이루어져 있다. 경로추종 제어 알고리즘은 목표경유점을 향하기 위해 선수각을 제어하는 부분과 목표속도로 추진하기 위해 속도를 제어하는 부분으로 나뉘어져 있다. 선수각 제어 시 경로와 무인선과의 위치 오차를 줄이는 방향으로 선수각이 향할 수 있도록 알고리즘이 설계되었다. 속도 제어의 경우 RPM 별로 실제 속도를 계측하여 데이터화 한 후, 실제 속도가 명령 속도와 다를 경우 RPM을 가감하여 명령 속도로 추진하기 위해 제어할 수 있도록 하였다. Fig. 2에서 파란색 선은 설계한 알고리즘을 활용하여 경로추종 제어를 한 결과의 궤적을 보여준다.