• 제목/요약/키워드: Field wall

검색결과 1,608건 처리시간 0.037초

국도 상 도로시설물 대상 열화환경 조건 별 콘크리트 염화물 침투 특성 분석 (Analysis of Chloride Ion Penetration Properties into Concrete on Road Facilities Depending on the Deterioration Environments)

  • 민지영;이종석;이탁곤;차기혁
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권5호
    • /
    • pp.102-113
    • /
    • 2021
  • 「시설물의 안전 및 유지관리 실시 세부지침(성능평가편)」의 내구성능 평가에서 열화환경 평가항목으로 제시된 제설제 및 비래염분에 의한 염해환경, 동해환경이 국내 국도 상 콘크리트 도로시설물의 염화물 침투특성에 미치는 영향을 살펴보았다. 강원 고성, 서울, 경기 고양, 부산에 위치한 교량 총 4개소, 강원권 방호울타리 4개소, 부산권 방호울타리 3개소 및 옹벽 1개소를 대상 시설물로 선정하였으며, 제설제에 의한 직접·간접적인 염해환경, 해안거리 및 교각 높이별 비래염분에 의한 염해환경에서 염화물 침투특성을 분석하였다. 분석 결과, (1) 제설제 살포일수(강설일수)에 따른 지역별 특성이 명확하게 구분되었고, (2) 바닥판 관통 누수 혹은 신축이음부를 통한 누수 등이 발생한 경우 침투 염화물량이 유의미한 수준까지 증가하였으며, (3) 부산 해안가에 위치한 교량의 경우 높이 20m까지 비래염분의 영향권에 해당함을 확인하였다. 이로부터, 동일한 시설물이라도 노출된 열화환경, 부재의 위치 및 높이, 열화진전상태에 따라 염화물 침투특성이 달라지기 때문에 시설물 점검 시 점검대상 부재 및 위치의 선정이 매우 중요함을 확인하였으며, 국내 지역별 및 부재별 열화환경에서의 염화물 침투특성에 관한 데이터베이스를 구축한다면 콘크리트 시설물에 대한 선제적인 내구성능 관리가 가능할 것으로 기대된다.

Nanolayered CuWO4 Decoration on Fluorine-Doped SnO2 Inverse Opals for Solar Water Oxidation

  • Cho, Ha Eun;Yun, Gun;Arunachalam, Maheswari;Ahn, Kwang-Soon;Kim, Chung Soo;Lim, Dong-Ha;Kang, Soon Hyung
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권4호
    • /
    • pp.282-291
    • /
    • 2018
  • The pristine fluorine-doped $SnO_2$ (abbreviated as FTO) inverse opal (IO) was developed using a 410 nm polystyrene bead template. The nanolayered copper tungsten oxide ($CuWO_4$) was decorated on the FTO IO film using a facile electrochemical deposition, subsequently followed by annealing at $500^{\circ}C$ for 90 min. The morphologies, crystalline structure, optical properties and photoelectrochemical characteristics of the FTO and $CuWO_4$-decorated FTO (briefly denoted as $FTO/CuWO_4$) IO film were investigated by field emission scanning electron microscopy, X-ray diffraction, UV-vis spectroscopy and electrochemical impedance spectroscopy, showing FTO IO in the hexagonally closed-pack arrangement with a pore diameter and wall thickness of about 300 nm and 20 nm, respectively. Above this film, the $CuWO_4$ was electrodeposited by controlling the cycling number in cyclic voltammetry, suggesting that the $CuWO_4$ formed during 4 cycles (abbreviated as $CuWO_4$(4 cycles)) on FTO IO film exhibited partial distribution of $CuWO_4$ nanoparticles. Additional distribution of $CuWO_4$ nanoparticles was observed in the case of $FTO/CuWO_4$(8 cycles) IO film. The $CuWO_4$ layer exhibits triclinic structure with an indirect band gap of approximately 2.5 eV and shows the enhanced visible light absorption. The photoelectrochemical (PEC) behavior was evaluated in the 0.5 M $Na_2SO_4$ solution under solar illumination, suggesting that the $FTO/CuWO_4$(4 cycles) IO films exhibit a photocurrent density ($J_{sc}$) of $0.42mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE, denoted as $V_{RHE}$), while the FTO IO and $FTO/CuWO_4$(8 cycles) IO films exhibited a $J_{sc}$ of 0.14 and $0.24mA/cm^2$ at $1.23V_{RHE}$, respectively. This difference can be explained by the increased visible light absorption by the $CuWO_4$ layer and the favorable charge separation/transfer event in the cascading band alignment between FTO and $CuWO_4$ layer, enhancing the overall PEC performance.

경주읍성 성곽시설의 원형고증에 관한 연구 (A Study on Historical Research of Archetype of Kyeong Ju Castle)

  • 김홍곤;김영모
    • 헤리티지:역사와 과학
    • /
    • 제43권2호
    • /
    • pp.4-39
    • /
    • 2010
  • 본 연구에서는 경주읍성의 성벽과 성곽시설을 대상으로 그 간의 연구 성과를 집대성하고 구체적인 규모와 구조를 밝히기 위하여 원형을 고찰하였다. 그 결과 다음과 같은 몇 가지 사실을 확인 발견할 수 있었다. 첫째, 경주읍성의 위치와 규모를 고증하기 위하여 일제강점기 지적도 현재 지적도 현재 수지형도 발굴조사 유구 현황도를 도면중첩(over-lay) 한 결과 정확한 성곽유적의 위치와 규모를 확증할 수 있었다. 둘째, 문헌적 고증과 근현대의 연구사료 일제강점기의 유적조사 기록 보수정비 기록 등을 종합적으로 분석 고증한 결과 체성과 치의 규모 및 구조를 고증할 수 있었다. 셋째, 조선시대의 여장규식과 관련 문헌기록을 통하여 여장의 원형을 고증한 결과 문종원년(1451)의 초기 경주읍성의 여장과 임진란 전후(16세기 경)의 경주읍성 여장의 원형을 추정할 수 있었다. 넷째, 성곽 유적 대부분이 멸실된 상태이나 경주읍성의 문헌적 고증과 근현대 연구 사료(발굴조사 보수 수리기록 현장조사)의 조사내용을 토대로 규모를 산정하고 구조를 추정하였으며, 이에 그치지 않고 향후 복원정비의 기초자료로서 개별 유적의 원형복원도를 작성 제시하였다.

BIM기반 Algorithm을 활용한 APR1400 설계기준 통합관리 체계 구축 (Establishment of Integrated Design Bases Management System of APR1400 Using BIM based Algorithm)

  • 신재섭;최재필
    • 한국건설관리학회논문집
    • /
    • 제20권5호
    • /
    • pp.52-60
    • /
    • 2019
  • APR1400은 1992년 12월부터 2001년 12월까지 약 10여년에 걸쳐 국가선도 기술개발과제를 통해 개발된 1,400MWe급 차세대 원자력발전소 노형으로, 건설을 위해서 약 6만 5천 장의 도면이 생산된다. 또한 수많은 도면 간 일치성 유지를 설계기준(Design Bases)에 따라 가장 높은 수준의 설계기준도면(Design Bases Drawing)를 작성하여 후속설계에 가이드라인 역할로 활용하고 있다. 하지만 설계기준도면이 문서기반으로 생산 관리되고 있고, 다양한 분야에서 파편적으로 운영되어 설계기준정보를 정확하게 인지하고 후속설계에 정확하게 반영하는데 어려움이 있었다. 따라서 본 연구는 문서기반의 설계기준도면의 한계를 인식하고, BIM 기반의 설계기준 통합관리 체계를 도입하여, 설계기준 정보를 체계적이고 정확하게 후속설계에 반영 할 수 있는 체계를 구축하였다. 특히 DBIL(설계기준정보층)개념을 도입하여 5가지 설계기준(물리적방호, 화재방호, 내부비산물방호, 내부침수방호, 방사선방호)을 적용하여 DBIL생성 및 속성을 분석하였다. 최종 결과물인 DBIL set와 Datasheet에는 실(Room), DBIL, 설계기준 속성, 빌딩 데이터(벽 바닥 슬라브, 문 창문, 수직 수평관통부)를 통합 추출하여 후속설계 자동화 및 설계검증에 활용할 수 있도록 하였다. 더 나아가 APR1400 DBIL에 적용되는 5가지 설계기준의 속성을 분석하여 후속호기 및 차세대 노형과의 비교를 통한 경제성 분석 등에 폭 넓게 활용할 수 있을 것이라 예상한다.

자동노출제어장치를 이용한 요추 측면 방사선검사 시 환자 중심 위치 변화가 선량과 화질에 미치는 영향 (Effects of Dose and Image Quality according to Center Location in Lumbar Spine Lateral Radiography Using AEC Mode)

  • 정운찬;주영철
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권2호
    • /
    • pp.85-90
    • /
    • 2021
  • The purpose of this study is to consider usefulness of using AEC mode and importance of patient center location in L-spine lateral radiography by comparing dose and image quality according to the change of patient center location with using AEC mode or not. In this study, guide wire is attached to the human body phantom's lumbar spine and the lead ruler is attached to the bottom of the wall detector to find out center location in detector. ESD, mAs, and EI were selected as dose factors, and image quality was compared through SNR. With the lumbar spine located center of the detector, dose factors and image quality were compared according to using AEC mode or not. Afterwards, phantom moved 4 cm and 8 cm back and forth and compared dose factors and image quality. The exposure parameters were 85 kVp, 320 mA, x-ray field size 10×17 inch, and the distance between the center X-ray and the detector was fixed at 100 cm. The center X-ray was perpendicular to the fourth lumbar spine and the only bottom AEC chamber was used. All data were analyzed by independent t-test and ANOVA. As a result of this study, with AEC when the center is matched, ESD was 1.31±0.01 mGy, without AEC was 2.12±0.01 mGy. SNR was shown to be 22.81±1.83, and 23.44±1.87 respectively. When the phantom's center moves 4 cm, 8 cm forward, and 4 cm, 8 cm backward, ESD were 1.09±0.004 mGy, 0.32±0.003 mGy, 1.19±0.017 mGy, 1.11±0.006 mGy respectively, SNR were 18.29±0.60 dB, 11.11±0.22 dB, 18.98±0.80 dB, 17.71±0.82 dB. Using AEC in L-spine lateral radiography reduced ESD by 38%, EI by 35%, and mAs by 38%, without any difference in SNR(p<0.05). When the phantom's center moves 4 cm, 8 cm forward, and 4 cm, 8 cm backward, ESD was decreasing each 16%, 75%, 9%, 15%, EI was decreasing each 14%, 77%, 15%, 20%, mAs was decreasing each 15% 75% 9%, 15%. SNR was decreasing each 19%, 51%, 17%, 22%.

CFD 해석을 이용한 냉매용 원터치 삽입식 파이프 조인트의 유동 안전성 평가 (Flow Safety Assessment by CFD Analysis in One-Touch Insertion Type Pipe Joint for Refrigerant)

  • 김은영;박동삼
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.550-559
    • /
    • 2022
  • 연구목적: 파이프는 기계, 전자, 전기, 플랜트 등 많은 산업 분야에서 응용기기로 널리 사용되고 있으며, 소방, 화학 등 안전 관련 분야에서도 널리 사용되고 있습니다. 제품의 다양화에 따라 배관 분야에서도 기술의 중요성이 높아지고 있습니다. 특히 기존 동관을 스테인리스강으로 변경하는 경우 구조해석이나 유동 해석을 통해 안전성과 유동특성을 평가할 필요가 있다. 연구방법: 자체 개발한 일체형 인서트형 커넥터인 6.35 소켓 모델의 유동 안전성은 CFD 해석을 이용하여 유동유발진동(FIV) 평가 과정의 4단계를 통해 진행하였다. 연구결과: 배관계 벽면에 작용하는 압력변동의 진폭은 3,780Pa이하의 수준으로 형성되며, 이는 냉매 배관의 운전압력이나 설계응력과 비교했을 때 매우 작은 수준의 압력으로, 난류에 의한 진동이 배관의 구조안전성에 미치는 영향은 미미한 수준인 것으로 나타났다. 결론: 유동 해석을 통하여 후크조인트 체결 시 발생하는 압력 및 진동 등을 검토한 결과 일반적인 배관계의 고유진동수가 50Hz 이하에서 형성되는 것을 고려했을 때, 난류유동에 의해 유발되는 진동이 배관계의 공진을 발생시킬 가능성은 희박한 것으로 판단된다.

벼 무논골뿌림 재배시 중간낙수 회수가 도복 및 생육에 미치는 영향 (Influence of Midsummer Drainage Times on Lodging and Growth of Rice in Direct Drill Seeding Culture on Puddled Soil)

  • 김상수;최원영;석순종;이선용;김종호;조동삼
    • 한국작물학회지
    • /
    • 제40권1호
    • /
    • pp.33-38
    • /
    • 1995
  • 벼 무논골뿌림재배시 도복방지를 위한 물관리방법을 구명하고자 동진벼를 5월11일에 골깊이를 4cm로 하여 파종하고 중간 락수 회수를 달리하여 도복형질 및 생육을 검토한 결과를 요약하면 다음과 같다. 1. 상시담수에 비하여 락수회수가 많을수록 절간장이 짧았으며 N$_3$, N$_4$의 간태는 락수회수가 적을수록 굵었으나 간벽은 락수회수가 많을수록 두꺼웠으며 건물중은 1~2회 락수에서 상시담수나 3회락수에 비하여 무거웠다. 2. 락수회수가 많을수록 간장이 작고 생체중이 가벼웠으나 좌절중은 무거워서 도복 지수가 적었으며 도복은 상시담수에서 심하게 발생하였고 1회 락수에서는 약간 발생하였으며 2회와 3회락수에서는 발생하지 않았다. 3. 출수기의 토양경도는 락수회수가 많을수록 컸으며 뿌리량은 1~2회 락수에서 많고 뿌리의 심층분포비율은 락수회수가 많을수록 높았다. 4. 수량은 1~2회 락수에서 상시담수와 3회 락수에 비하여 많았고 락수회수가 많을수록 미질이 양호하였다. 5. 따라서 벼 무논골뿌림 재배시는 파종후 30일과 파종후 50일에 실금갈 경도로 락수하는 것이 도복방지 및 수량증대를 위한 적절한 물관리방법으로 생각된다.

  • PDF

$CuGaSe_2$ 단결정 박막 성장과 광전류 특성 (Growth and Photocurrent Properties of $CuGaSe_2$ Single Crystal)

  • K.J. Hong
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.81-81
    • /
    • 2003
  • The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

  • PDF

Available phosphorus levels modulate gene expression related to intestinal calcium and phosphorus absorption and bone parameters differently in gilts and barrows

  • Julia Christiane Votterl;Jutamat Klinsoda;Simone Koger;Isabel Hennig-Pauka;Doris Verhovsek;Barbara U. Metzler-Zebeli
    • Animal Bioscience
    • /
    • 제36권5호
    • /
    • pp.740-752
    • /
    • 2023
  • Objective: Dietary phytase increases bioavailability of phytate-bound phosphorus (P) in pig nutrition affecting dietary calcium (Ca) to P ratio, intestinal uptake, and systemic utilization of both minerals, which may contribute to improper bone mineralization. We used phytase to assess long-term effects of two dietary available P (aP) levels using a one-phase feeding system on gene expression related to Ca and P homeostasis along the intestinal tract and in the kidney, short-chain fatty acids in stomach, cecum, and colon, serum, and bone parameters in growing gilts and barrows. Methods: Growing pigs (37.9±6.2 kg) had either free access to a diet without (Con; 75 gilts and 69 barrows) or with phytase (650 phytase units; n = 72/diet) for 56 days. Samples of blood, duodenal, jejunal, ileal, cecal, and colonic mucosa and digesta, kidney, and metacarpal bones were collected from 24 pigs (6 gilts and 6 barrows per diet). Results: Phytase decreased daily feed intake and average daily gain, whereas aP intake increased with phytase versus Con diet (p<0.05). Gilts had higher colonic expression of TRPV5, CDH1, CLDN4, ZO1, and OCLN and renal expression of TRPV5 and SLC34A3 compared to barrows (p<0.05). Phytase increased duodenal expression of TRPV5, TRPV6, CALB1, PMCA1b, CDH1, CLDN4, ZO1, and OCLN compared to Con diet (p<0.05). Furthermore, phytase increased expression of SCL34A2 in cecum and of FGF23 and CLDN4 in colon compared to Con diet (p<0.05). Alongside, phytase decreased gastric propionate, cecal valerate, and colonic caproate versus Con diet (p<0.05). Phytase reduced cortical wall thickness and index of metacarpal bones (p<0.05). Conclusion: Gene expression results suggested an intestinal adaptation to increased dietary aP amount by increasing duodenal trans- and paracellular Ca absorption to balance the systemically available Ca and P levels, whereas no adaption of relevant gene expression in kidney occurred. Greater average daily gain in barrows related to higher feed intake.

기초 폭 및 암반층의 영향을 고려한 마이크로파일 설치방안에 관한 연구 (The Effects of the Breadth of Foundation and Rock Layer on the Installation Method of Micro-piles)

  • 황태현;김지호;권오엽
    • 한국지반공학회논문집
    • /
    • 제26권6호
    • /
    • pp.29-38
    • /
    • 2010
  • 마이크로파일은 기존 얕은 기초의 지지력 증가 또는 침하 억제 목적으로 주로 사용되어 왔다. 최근에는 이러한 목적에만 국한되지 않고, 기존 파일과 유사한 지지파일, 사면의 안정을 위한 억지말뚝, 옹벽의 전단키 등과 같은 사용 목적에 따라 다양하게 현장에서 활용되고 있다. 마이크로파일의 활용 빈도가 점차 증가함에 따라 몇몇 연구자들이 현장 시험 또는 모형시험을 통해 최적의 설치 방법에 대해 연구를 하고 있다. 그러나 진행되고 있는 연구는 대부분이 토사 또는 점토지반을 대상으로 한 것이다. 현장지반은 단일 토사 또는 점토 지반만으로 구성된 경우가 드물다. 또한 암반층이 존재하는 지반에서는 암반층의 위치에 따라 파일 길이가 결정되며, 결정된 파일길이에 따라 파일 강성이 달라질 수 있으므로 이에 대한 연구가 요구된다. 본 연구에서는 암반층의 위치에 따른 마이크로파일의 최적 설치방안을 규명하기 위해 모형시험을 실시하였다. 연구 결과, 파일 강성과 관련된 파일 길이비(L/d)가 50이하인 경우에는 암반층 위치와 관계없이 수직으로 설치하는 것이 효과적인 것으로 나타났다. 또한 파일 길이비가 50을 초과하고, 암반층위치가 지반 파괴깊이보다 깊으면, 파일을 경사지게 설치하는 것이 더 효과적인 것으로 나타났다.