• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.106-114
• /
• 2006

본 연구에서는 블록형 보강토 옹벽에 경사계, 침하계, 토압계, 수직 및 수형 변위계, 스트레인게이지 등의 각종 계측기를 매설하여 시공 중 및 시공 후의 보강토 옹벽의거동과 전면벽체에 작용하는 수평토압의 크기 및 분포형태. 그리드에 발현되는 변형 형태 및 인장력의 크기와 침하특성 등을 옹벽의 직선부와 곡선부로 구분하여 분석하였다.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.161-176
• /
• 2008

The effect of variable viscosity on MHD mixed convection Hiemenz flow over a thermally stratified porous wedge plate has been studied in the presence of suction or injection. The wall of the wedge is embedded in a uniform Darcian porous medium in order to allow for possible fluid wall suction or injection and has a power-law variation of the wall temperature. An approximate numerical solution for the steady laminar boundary-layer flow over a wall of the wedge in the presence of thermal diffusion has been obtained by solving the governing equations using numerical technique. The fluid is assumed to be viscous and incompressible. Numerical calculations are carried out for different values of dimensionless parameters and an analysis of the results obtained shows that the flow field is influenced appreciably by the magnetic effect, variable viscosity, thermal stratification and suction / injection at wall surface. Effects of these major parameters on the transport behaviors are investigated methodically and typical results are illustrated to reveal the tendency of the solutions. Comparisons with previously published works are performed and excellent agreement between the results is obtained.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1990-1997
• /
• 1992

본 연구에서는 미소진폭의 파형벽을 가진 유로내에 응축성 기체인 습공기가 초음속으로 흐르는 경우의 유동에 대하여 정체점에서의 상대습도와 온도의 변화에 따 른 유동장내의 상태량의 변화와 경사충격파의 거동 등을 2차원 수직해석을 통하여 규 명하였다.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3208-3216
• /
• 1993

Heat transfer characteristics of the laminar oscillating flow in a circular pipe have been studied under the condition that the wall temperature of the pipe is distributed sinusoidally with the axial direction. The axial velocity was assumed to be uniform in radial direction and the temperature field was analyzed by means of the perturbation method. The results show that the difference between wall and section-time-averaged fluid temperature increases as the oscillating frequency increases and eventually converges to a constant value which is determined by the ratio of swept distance to the characteristic length of wall temperature distribution. Also it is shown that the dominant variable in the heat transfer process when swept distance ratio is greater than 1 is not thermal Womersley number(F) but thermal Womersley number multiplied by the square root of swept distance ratio. The variation of the time-averaged Nusselt number is obtained as a function of F. The results indicate that Nusselt number is proportional to $F_{\epsilon}^{1/2}$ when both of F and .epsilon. are much greater than 1.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.33-38
• /
• 2008

The effect of the radial temperature gradient and the presence of slits in the wall of outer of two cylinders involved in creating a Taylor-Couette flow was investigated by measuring the velocity field inside the gap. The slits were azimuthally located along the inner wall of the outer cylinder and the number of slits used in this study was 18. The radius ratio and aspect ratio of the models were 0.825 and 48, respectively. The heating film wrapped around the inner cylinder was used for generating the constant heat flux and we ensured the constant temperature condition at the outer space of the outer cylinder. The velocity fields were measured by using the PIV(particle image velocimetry) method. The refractive index matching method was applied to remove image distortion. The results were compared with plain wall configuration of Taylor-Couette flow. From the results, the presence of slits in the wall of outer cylinder and temperature gradient increased the flow instability.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.526-534
• /
• 2004

A new second-moment closure model for turbulent heat fluxes is proposed on the basis of the elliptic equation. The new model satisfies the near-wall balance between viscous diffusion, viscous dissipation and temperature-pressure gradient correlation, and also has the characteristics of approaching its respective conventional high Reynolds number model far away from the wall. The predictions of turbulent heat transfer in a channel flow have been carried out with constant wall heat flux and constant wall temperature difference boundary conditions respectively. The velocity field variables are supplied from the DNS data and the differential equations only fur the mean temperature and the scalar flux are solved by the present calculations. The present model is tested by direct comparisons with the DNS to validate the performance of the model predictions. The prediction results show that the behavior of the turbulent heat fluxes in the whole region is well captured by the present model.

• 한국재난정보학회 논문집
• /
• 제9권4호
• /
• pp.462-468
• /
• 2013

제방 월류방지 대체공법으로 전도식, 부력식 홍수방지벽을 국내 외에서 개발하는 실정이다. 그러나, 사전점검 불가 및 유지관리 문제점이 있어 본 연구에서는 국내 외 최초로 경량 재질이면서 강도가 우수한 유리섬유복합소재를 이용한 승하강식 홍수방지 벽체구조물을 연구 개발하였다. 개발된 홍수방지 벽체구조물은 수치해석을 통해 구조적 안정성과 함께 현장 적용성을 제시하여 공사비를 약 87%~95%로 감소시키고 벽체구조물 내부에 고무 지수부재를 설치하여 차수성이 확보되는 것을 확인하였다.

• Korea-Australia Rheology Journal
• /
• 제13권3호
• /
• pp.141-148
• /
• 2001

In this research, experimental studies leave been performed on the hydrodynamic interaction between a spherical particle and a plane wall by measuring the force between the particle and wall. To approach the system as a resistance problem, a servo-driving system was set-up by assembling a microstepping motor, a ball screw and a linear motion guide for the particle motion. Glycerin and dilute solution of polyacrylamide in glycerin were used as Newtonian and non-Newtonian fluids, respectively. The polymer solution behaves like a Boger fluid when the concentration is 1,000 ppm or less. The experimental results were compared with the asymptotic solution of Stokes equation. The result shows that fluid inertia plays all important role in the particle-wall interaction in Newtonian fluid. This implies that the motion of two particles in suspension is not reversible even in Newtonian fluid. In non-Newtonian fluid, normal stress difference and viscoelasticity play important roles as expected. In the dilute solution weak shear thinning and the migration of polymer molecules in the inhomogeneous flow field also affect the physic of the problem.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1609-1620
• /
• 1993

본 연구에서는 자연형 태양열시스템의 열성능에 영향을 미치는 인자를 열유동 전산해석을 통해 규명하고 모델을 설정하여 활용률을 최대로 하는 형상을 제시하고자 한다.

• 한국작물학회지
• /
• 제43권1호
• /
• pp.32-37
• /
• 1998

The objective of this study was to analyze lodging-related traits using different cultivars from Korea, Japan, and the U.S. in direct seeded rice on dry paddy field. Stem diameter and culm wall thickness were highest in 'Caloro' followed by 'Nongan', 'M202', and 'Calrose'. All the U.S. cultivars were higher than the others in stem diameter and culm wall thickness. These two traits were important with regard to lodging. The highest breaking strength (1442g) was observed in Caloro. 'Gancheoek', 'Dongjin', and transplanted 'Hatsuboshi' showed more than 1000g in breaking strength. Lodging index was lowest in Hatsuboshi followed by Nongan and Gancheok. Even though breaking strength of the U.S. cultivars was higher than others, their lodging index values were high. There were no statistically significant differences in starch content. However, Calrose, Caloro, Dongjin, and Koshihikari were relatively higher than others in starch content. Positive correlations were found between culm base weight, lignin and breaking strength. High contents of lignin and cellulose were observed in Nongan, transplanted Hatsuboshi, Calrose, and Caloro. Traits such as stem diameter, culm wall thickness, bending moment, culm length, breaking strength, cellulose, lignin, and culm base weight were closely related to a lodging index. According to path coefficient analysis, most important traits were culm length, stem diameter, thickness of clum wall, and top plant weight.