• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.504-508
• /
• 2010

The development of high voltage Insulated Gate Bipolar Transistor (IGBT) have given new device advantage in the areas where they compete with conventional GTO (Gate Turnoff Thyristor) technology. The IGBT combines the advantages of a power MOSFET (Metal-Oxide Semiconductor Field-Effect Transistor) and a bipolar power transistor. The change of electrical characteristics for IGBT is mainly coming from the change of characteristics of MOSFET at the input gate and the PNP transistors at the output. The change of threshold voltage, which is one of the important design parameters, is brought by charge trapping at the gate oxide under the environment that radiation exists. The energy loss will be also studied as the inductance values are changed. In this paper, the electrical characteristics are simulated by SPICE, and compared for variation of inductance and threshold voltage based on IGBT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.372-376
• /
• 2018

The effects of off-state bias stress on the characteristics of p-type poly-Si TFT were investigated. To reduce the gate-induced drain leakage (GIDL) current, the off-state bias stress was changed by varying Vgs and Vds. After application of the off-state bias stress, the Vgs causing GIDL current was dramatically increased from 1 to 10 V, and thus, the Vgs margin to turn off the TFT was improved. The on-current and subthreshold swing in the aged TFT was maintained. We performed a technology computer-aided design (TCAD) simulation to describe the aged characteristics. The aged-transfer characteristics were well described by the local charge trapping. The activation energy of the GIDL current was measured for the pristine and aged characteristics. The reduced GIDL current was mainly a thermionic field-emission current.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.101-105
• /
• 2016

Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.388-388
• /
• 2012

In this letter, We have investigated cell characteristics of the alloy FePt-NDs charge trapping memory capacitors with high-k $Al_2O_3$ dielectrics as a blocking oxide. The capacitance versus voltage (C-V) curves obtained from a representative MOS capacitor embedded with FePt-NDs synthesized by the post deposition annealing (PDA) treatment process exhibit the window of flat-band voltage shift, which indicates the presence of charge storages in the FePt-NDs. It is shown that NDs memory with high-k $Al_2O_3$ as a blocking oxide has performance in large memory window and low leakage current when the diameter of ND is below 2 nm. Moreover, high-k $Al_2O_3$ as a blocking oxide increases the electric field across the tunnel oxide, while reducing the electric field across the blocking layer. From this result, this device can achieve lower P/E voltage and lower leakage current. As a result, a FePt-NDs device with high-k $Al_2O_3$ as a blocking oxide obtained a~7V reduction in the programming voltages with 7.8 V memory.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.235-239
• /
• 2006

Charge dynamics in polymeric materials after aged under ac electric field using the pulsed electroacoustic (PEA) technique is reported. The emphasis is placed on charge decay. The charge dynamics of the ac aged additive free low density polyethylene (LDPE) samples under dc bias differ from the sample without ac ageing, indicating changes brought in by ac ageing. It is believed that a slow decay rate of charge in the ac aged sample is related to the formation of deep traps in the material. However, chemical analysis by infrared spectroscope (FTIR) and Raman microscope reveals no significant chemical changes taken place in the bulk of the material after ac ageing. Further experiments on irradiated LDPE have revealed a similar behaviour, i.e. the charge decay is slower in irradiated samples than that of fresh sample. The findings presented clearly indicate that space charge measurement can be used as a diagnostic tool to monitor ageing in polymeric materials.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.204-207
• /
• 1996

Fiberglass may be a pulmonary toxin and carcinogen because it imitates asbestos, as do other man-made mineral fibers. A 5-months-old Jind dog was accidentally exposed to fiberglass extensively for 3 months in a site of apartment construction. Canine acute clinical pneumoconiosis caused by fiberglass was diagnosed by history, ezamination of environment, physical examination, and chest x-ray check of patient. The main signs were anorexia, dyspnea, increased irregular opacities and air trapping in lung field of chest x-ray films. Because the fiverglass which is used for several purpose are dangerous for health of animal and human. fiberglass dust must be controlled to minimize the adverse effects of fiberglass in the environment.

• The Korean Journal of Mycology
• /
• v.9 no.4
• /
• pp.193-197
• /
• 1981

Nematode destroying-fungi from ginseng field were isolated and then identified on 2% wateragar and malt extract agar media. 1. Six strains of Arthrobotrys sp. and three strains of Harposporium sp. were isolated and identified. 2. Arthrobotrys sp. formed trapping apparatus when they were cultured with Nematode and appeared to be destroying fungi. 3. Harposporium sp. appeared to be endoparasitic fungi. 4. Both Arthrobotrys sp. and Harposporium sp. were grown well on nutrient agar and malt extract agar.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.1
• /
• pp.69-76
• /
• 2002

Mustard aphid, Lipaphis erysimi(Kalt.) plays a key role in determining the productivity of rapeseed-mustard. This pest alone attributes 30-70% losses in yield potential in different agro climatic zones with a mean loss of 54.2% in India. Considering the extent of damage caused by the pest, the present experiment was conducted at Pulses and Oilseeds Research Station during 1992-93 to 1994-95 to study the migratory nature of mustard aphid by trapping them in yellow colour pan tray and their simultaneous growth and development on three different genotypes. The temperature during noon hours is the predominant factor to govern the appearance of alate mustard aphid in rapeseed-mustard field. Stepwise regression analysis revealed that temperature and relative humidity played an important role for its development. The variety RW white flower glossy stem harboured minimum number of aphid in comparison to other two varieties B 9 and T6342. The population reached a peak of 61.28 aphids/10 cm central twig during $6^{th}$ standard week irrespective of varieties.

• Journal of Astronomy and Space Sciences
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1988

Electron beam propagation in a fully ionized plasma has been studied using a one-dimensional particle simulation model. We compare the results of electrostatic simulations to those of electromagnetic simulations. The electrostatic results show the essential features of beam-plasma interactions. It is found that the return currents are enhanced by the beam-plasma instability which accelerates ambinet plasmas. The results also show the heating of ambient plasmas and the trapping of plasmas due to the locally generated electric field. The electromagnetic simulations show much the same results as the electrostatic simulations do. The level of the radiation generated by the same non-relativistic beam is slightly higher than the noise level. We discuss the results in context in context of the heating of coronal plasma during solar flares.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.