• 한국항행학회논문지
• /
• 제17권5호
• /
• pp.484-490
• /
• 2013

VHF 및 UHF 대역에서 무선통신의 급격한 발전에 따라 신뢰할 만한 전파예측 기법에 대한 요구가 증가하고 있다. 따라서 국내뿐만 아니라 세계 각국에서는 자국의 환경에 맞는 전파모델을 확보하려고 노력하고 있고, 많은 모델이 개발되어 전파분석에 이용되어 왔지만, 아직도 측정결과와 상이한 결과를 제공하고 있다. 이에 본 연구에서는 국내 대도심지역의 DTV 방송서비스 방송 주파수에 대해 측정한 후, 측정된 데이터와 전파자원분석시스템(SMIS)내의 예측모델 P.1546 및 BCAST에 대한 실측/예측 비교분석 및 이의 오차 분석을 수행하여 SMIS 향후 개선방안을 제시한다. P.1546 및 BCAST 모델적용에 있어 실측/예측 오차, 특히 BCAST 모델인 경우 상하로 큰 오차를 보이는 문제점 등이 도출되어 고층건물에 의한 회절손실 등에 대한 면밀한 분석이 향후 필요하다.

• 한국지반환경공학회 논문집
• /
• 제6권1호
• /
• pp.23-31
• /
• 2005

실트폰드는 크기가 55만평의 인공연못 안에 두께가 3~20m의 초연약점토가 침전되어 있었다. 1990년대 중반에 매립이 시작되었다. 매립 전 시료채취 및 다양한 종류의 원위치시험을 수행하였다. 실트폰드에 침전되어 있는 흙은 극도로 연약하기 때문에 모래 포설장비를 이용하여 모래를 전 지역에 균등하게 살포하였다. 대단히 주의 깊은 시공에도 불구하고 모래 포설시 대규모 전단파괴가 발생하였다. 따라서 파괴지역에 보강을 위하여 가로가 900m이고 세로가 700m인 고강도 보강매트를 포설한 후 재차 모래를 포설하여 매립을 완료하였다. 매립의 성공은 수중 콘관입시험으로 확인하였다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.88-92
• /
• 2013

The icebreaking research vessel (IBRV) ARAON had her second ice trial in the Arctic Ocean in the summer season of 2010. During the voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. These measurements were carried out in three icebreaking performance tests. To convert the measured strains into the local ice pressures, a finite element model of the instrumented area was developed. The influence coefficient method (ICM), which uses the influence coefficient from the finite element model, and the direct method, which uses the measured strain, were selected as the conversion methods. As a result, the maximum measured pressure was 1.236MPa, and the average difference between ICM and the direct method was about 5% for an area of $0.2m^2$. The pressure-area relationship of the measurement falls below the range of the existing pressure-area curve, which is due to the low ice strength of melted ice in the summer.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.921-938
• /
• 2018

The Motzfeldt intrusions in the Gardar Province, southern Greenland, split into syenitic plutonic and hypabyssal rocks, in which the latter include ring dykes and sheet intrusions. Sheet intrusions, considered as the source for rare earth elements (REE) and high field strength elements (HFSE), comprise sheets of peralkaline microsyenite (SPM), syenitic pegmatite (SP), and peralkaline microsyenite (PM). SP exhibits extremely high concentrations of REE and HFSE, which are positively correlated with increasing alkalinity from early towards late intrusion, caused by magmatic processes. In contrast, some of the SPM and PM are also significantly enriched in REE and HFSE, caused by post-magmatic fluids. The REE- and HFSE-rich phases in SP consist mainly of zircon and allanite with smaller amounts of pyrochlore in pseudomorph from the inferred eudialyte, whereas some of the PM and SPM consist of pyrochlore, REE-carbonate, and zircon in the matrix. The zircon grains in the Motzfeldt Sø Formation (MSF) syenite occur in interstitial spaces, exhibiting an association with magnetite and a bipyramidal form in texture. They are characterized by a highly fractured and embayed rim. Zircons from PM and SP are clearly enriched in Fe, Al, Ca, Na, Y, P, Hf, Y, P, Nb, Ta, and REE, and are depleted in Zr and Si in comparison with magmatic zircon. They also show a clear trend of higher LREE/HREE and $Eu/Eu^{\star}$ ratios, and lower $Ce/Ce^{\star}$ ratios, which define them as typical hydrothermal zircons. In contrast, zircons from the MSF syenite show a relatively lower LREE/HREE ratio and Eu and Ce anomalies of a similar magnitude compared with those from SP and PM. The occurrence and mineral composition of the zircon suggest that post-magmatic fluids have played an important role in the remobilization of REE and HFSE as well as the primary concentration of REE and HFSE, caused by magmatic processes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.350-355
• /
• 2012

최근 다양한 공학 응용 분야에 Micro Shock Tube의 중요성이 커지고 있다. Pharma Ballistic 기술은 기존의 약물주입방법과 달리 약물입자를 가속하여 피부로 침투시키기 위해 Micro Shock Tube를 적용하는 기술 중 하나이다. 그러나 이러한 장치의 효율적인 설계를 위해서는 Micro Shock Tube 내부유동과 충격특성에 대한 상세한 지식을 필요로 한다. 경계층과 같은 많은 요소들 때문에 Micro Shock Tube 내부의 낮은 Reynolds Number와 높은 Knudsen Number가 형성되며, 이 때의 충격파 전파는 기존의 Macro Shock Tube와 상이하게 나타난다. 본 연구에서는 Micro Shock Tube에서의 충격파 전파와 유동특성을 조사하기 위해 직경 3mm의 Micro Shock Tube를 이용하여 실험을 수행하였으며, 압력은 저압관의 세 지점에서 측정되었다. 충격파 속도와 같은 다른 변수들의 실험값으로부터 충격파 강도를 찾고 충격파 선도를 나타내었다.

• Geomechanics and Engineering
• /
• 제1권4호
• /
• pp.275-289
• /
• 2009

Electroosmosis (EO) is the movement of water in a porous medium under the influence of a direct current (dc). In past decades, electro-osmosis has been successfully employed in many soil improvement and other geotechnical engineering projects. Metal electrodes, such as steel, copper and aluminum have been used traditionally to conduct current. The shortcoming of these electrodes is that they corrode easily during an EO treatment, which results in reduced effectiveness and environmental concerns. More recently, conductive polymers are developed to replace metal electrodes in EO treatment. Electrical vertical drainages (EVDs) are one of these products under trial. The goal of this study is to assess the performance of EVDs for soil improvement and to further understand the scientific principle of the EO process, including the voltage drop at the soil-EVD interface, electrical current density, polarity reversal, and changes in soil physico-chemical properties generated by electroosmosis. It is found from the study that after 19 days of EO treatment with a constant applied dc electric field intensity of 133 V/m, the soil's moisture content decreased by 28%, the shear strength and pre-consolidation pressure increased more than 400%. It is also found that the current density required triggering the water flow in the soil tested, the Korean Yulchon marine clay, is 0.7 $A/m^2$. The project demonstrates that EVDs can serve as both electrodes and drains for soil improvement in short term. However, the EVDs, as tested, are not suitable for polarity reversal in EO treatment and their service life is limited to only 15 days.

• Advances in nano research
• /
• 제4권1호
• /
• pp.15-29
• /
• 2016

A low cost environmentally benign surface coating binder is highly desirable in the field of material science. In this report, castor oil based hyperbranched polyester/bitumen modified fly ash nanocomposites were fabricated to achieve the desired performance. The hyperbranched polyester resin was synthesized by a three-step one pot condensation reaction using monoglyceride of castor oil based carboxyl terminated pre-polymer and 2,2-bis (hydroxymethyl) propionic acid. Also, the bulk fly ash of paper industry waste was converted to hydrophilic nano fly ash by ultrasonication followed by transforming it to an organonano fly ash by the modification with bitumen. The synthesized polyester resin and its nanocomposites were characterized by different analytical and spectroscopic tools. The nanocomposite obtained in presence of 20 wt% styrene (with respect to polyester) was found to be more homogeneous and stable compared to nanocomposite without styrene. The performance in terms of tensile strength, impact resistance, scratch hardness, chemical resistance and thermal stability was found to be improved significantly after formation of nanocomposite compared to the pristine system after curing with bisphenol-A based epoxy and poly(amido amine). The overall results of transmission electron microscopic (TEM) analysis and performance showed good exfoliation of the nano fly ash in the polyester matrix. Thus the studied nanocomposites would open up a new avenue on development of low cost high performing surface coating materials.

• Geomechanics and Engineering
• /
• 제6권2호
• /
• pp.173-194
• /
• 2014

Laboratory and field data showed that deep mixed (DM) columns accelerated the rate of consolidation of the soft foundations. Most analyses of consolidation of DM column-improved foundations so far have been based on the elastic theory. In reality, the DM columns may yield due to the stress concentration from the soft soil and its limited strength. The influence of column yielding on the degree of consolidation of the soft foundation improved by DM columns has not been well investigated. A three-dimensional mechanically and hydraulically-coupled numerical method was adopted in this study to investigate the degree of consolidation of the DM column foundation considering column yielding. A unit cell model was used, in which the soil was modeled as a linearly elastic material. For a comparison purpose, the DM column was modeled as an elastic or elastic-plastic material. This study examined the aspects of stress transfer, settlement, and degree of consolidation of the foundations without or with the consideration of the yielding of the DM column. A parametric study was conducted to investigate the influence of the column yielding on the stress concentration ratio, settlement, and average degree of consolidation of the DM column foundation. The stress concentration ratio increased and then decreased to reach a constant value with the increase of the column modulus and time. A simplified method was proposed to calculate the maximum stress concentration ratios under undrained and drained conditions considering the column yielding. The simplified method based on a composite foundation concept could conservatively estimate the consolidation settlement. An increase of the column modulus, area replacement ratio, and/or column permeability increased the rate of consolidation.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.129-134
• /
• 1994

레이저 절단기는 고도의 정밀을 요하는 선체구조강판의 가공용으로 최근 조선소에서 사용되게 되었으며, 정밀성 유지를 위해서 이 시스템 자체의 운동으로 인한 변형은 일정한도 내에서 유지되어야 한다. 본 논문에서는 새로 개발된 레이저 절단기의 모드해석 및 구조해석을 이 시스템의 설계요구조건에 부합하는지를 검토하기 위하여 수행하였으며, 이를 위하여 유한 요소 모델링의 효과적인 기법과 가상 질량요소를 분대하는 기법, 가속도장의 변화로 주어지는 외력조건의 구체화 방법등을 제시하였다. 또한 고유진동해석을 수행하여 이 시스템의 동적효과 존재 여부를 검토하였으며 시간영역의 동적해석을 하지 않고 정적해석을 통한 시스템 특성 규명 타당성을 규명하였다. 해석 접근 방법의 유용성이 입증되었으며 결과적으로 본 논문에서 보여 준 해석기법은 유사한 시스템의 특성 규명에 유효하게 적용될 수 있음을 시사하고 있다.

• 한국식품저장유통학회지
• /
• 제14권2호
• /
• pp.165-169
• /
• 2007

천연 식용 색소원으로서 최근 주목받고 있는 자색 고구마로부터의 색소 추출에 대한고전압펄스전기장의 영향을 조사하였다. 자색 고구마 색소는 일정한 주파수와 처리시간 하에서 전기장의 세기를 변화시켜 추출하였을 경우 전기장의 크기가 증가함에 따라 색소의 추출량도 점차 많아지고 있음을 나타내었으며 최적 전압은 35kV/cm임을 알 수 있었다. 동일한 전기장의 세기와 처리시간을 주고 주파수만을 변화시키면서 추출을 했을 경우 낮은 주파수에서 500Hz까지는 추출량이 큰 폭의 증가를 보였으나, 500 Hz 이상에서는 spark발생에 의한 색소의 파괴로 약간씩의 감소를 나타내었다. 전기장의 세기나 주파수가 추출에 큰 영향을 미치는 것으로 나타났지만 일정한 전기장과 주파수 하에서 처리 시간은 색소의 추출양에 큰 영향을 미치지 못하는 것으로 나타났다.