• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.27-35
• /
• 2002

To construct pipe lines, culverts, or other utility lines, temporary slopes formed by excavating the compacted embankment are frequently met with in the field. Ignoring stability analyses for such slopes and applying inappropriate slope inclinations often result in safety problems. In this study, stability of such slopes were investigated considering the influence of anisotropic shear strength of the layered compacted ground. A series of stability analyses were conducted for slopes varying the slope angle and the height, and assuming isotropic and anisotropic shear strength conditions, respectively. The anisotropic shear strength of the compacted soil was determined from the direct shear test for layered soil blocks varying the inclination angle between the horizontal shear surface and the direction of the soil layer. As a result of the analyses, it has been concluded that the appropriate slope inclination f3r a temporary slope could vary in accordance with the consideration of anisotropy. However, the factor of safety as well as the location of the failure surface did not show significant variation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.79-89
• /
• 2014

This study was carried out to provide basic information to improve the surrounding ecosystems with benefit analysis and monitoring in cut slopes following establishment of a test construction to improve ecological environment in slopes of an expressway. Field tests from October 2012 to May 2013 were conducted in Seosejong IC and Shinyang IC. In order to improve the view of slopes, soil condition is an important factor. The earth slope, it is possible to introduce directly the plant. Stable construction method was applied, another foundation for planting is necessary. The mixing ratio of the seeds according to the experimental results, the difference was found at an early stage plants in Site I (Seosejong IC). Trees were planted on terraced structures were well coordinated and pictures. The growth of planted trees was good in Site II (Shinyang IC). Due to the use of plants in the landscape will continue to change. Thus, long-term monitoring and landscape analysis will be needed.

• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.77-88
• /
• 2000

The goal of this study is to assess the spatial distribution of natural slopes and cutting slopes under would-be development. For this goal, a quantitative slope stability analysis method using GIS integrated with a computer program was developed. Through field investigations, the discontinuity parameters were collected such as orientation of discontinuity, persistence, spacing, JRC, JCS, and water depth. The distributions were interpolated from the ordinary kriging method in ARC/INFO GIS after variogram analysis. The layers showing all parameters needed for limit equilibrium analysis were constructed. The final layer using GIS works composed of 162,352 polygons, that is, unit slopes. The rock slope stability analysis program was coded by C++ language. This program can calculate geometrical vectors related to rock block failures using input orientation data and direction and dimension of strength to occur failure. Also, this can calculate shear strength of joints through empirical equations and quantitative factors of safety. This methodology was applied to the study area which is located in Jaecheon city and Danyang-gun of the northeastern Keumsu is about 135$km^2$. As a result, the study area was entirely stable but unstable, that is, factor of safety less than 1.0dominantly at the slopes near Keumsil, Daejangri, Keumsungmyun and Sojugol, Mt. Dongsan, Juksongmyun by the natural slope stability analysis. Assuming the cutting slope showing the same direction immediate, and quantitative analysis of factors of safety for a regional area could be conducted through GIS integrated with a computer program of limit equilibrium.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.2
• /
• pp.47-59
• /
• 2023

This study investigated and analyzed the effects of vegetation on the roadside slopes at the expressway construction sites in order to evaluate the vegetation recovery regarding soil type and revegetation technique. We selected two study sites with an area of 1,000 m² located in the construction sites of the Korea Expressway Corporation, named Hwado-Yangpyeong Expressway Section 3 and Saemangeum-Jeonju Expressway Section 7. The revegetation was monitored in three plot groups (earth, soft rock, and hard rock slopes), and scored based on the guideline of the Ministry of Land, Transport and Maritime Affairs. The revegatation was generally lower in the Hwado-Yangpyeong site than that of the Saemangeum-Jeonju site. The field monitoring indicated that the revegetation varied with slope aspect and environmental characteristics between plots. the Saemangeum-Jeonju site showed a high overall evaluation score, but there was a slight difference in the score for each plot. This seems to be due to the differences in geographical conditions, construction methods, and site environment between two sites. This study can provide basic information to understand the short-term effects of revegetation techniques in the roadside slopes.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.476-488
• /
• 1997

The purpose of this study was to figure out the suitable field standards for revegetation measures on cut-slopes in consideration of the environmental factors. The field survey was conducted from 1995 to 1996 on highway cut-slopes. The results obtained could be summarized as follows; The major revegetation measures surveyed were 5 major measures as a whole in descending order of seed-spraying measures, block-sod pitching measures, latticed block pitching measures, hydro-seeding measures with seed-fertilizer-soil materials, and several netting measures on highway cut-slopes. According to the analysis of the environmental factors, the plant coverage was affected several major environmental factors which were soil factors(soil hardness, soil texture, soil and rock condition), and site factors(slope gradient, slope length). From a viewpoint of optimum selection, the major 3 factors(soil factors, slope gradient factors, slope length factors) should be considered for selection of revegetation measures on highway cut-slopes.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.4
• /
• pp.25-34
• /
• 2017

The soil-water characteristics is the most important state parameter for understanding changes in suction and water contents of unsaturated soil slopes. In the field, the hysteretic behaviors of drying and wetting soil-water characteristic curve are real and the adoption of path-dependent suction-water content is needed to predict the hydro-mechanical analysis of unsaturated soils. In this study, in-situ monitored hydraulic behavior of various soil slopes are compared with the data from numerical analysis with the laboratory soil water characteristic curve. Then, the verifications are performed based on the field monitored data respectively. Therefore, the use of path-dependent soil-water characteristic curves could be more rational for design and analysis of unsaturated soil slopes under rainfall conditions.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.2
• /
• pp.31-44
• /
• 2016

This study analyzed pore water pressure, earth pressure and settlement through field monitoring on the project site in which raising embankments are being built through backside extension, and compared the behaviors of seepage analysis, slope stability analysis and stress-strain during flood water levels and rapid drawdown under steady state and transient condition. The variation of pore water pressure showed an increase during the later period in both upstream and downstream slope, with downstream slope more largely increased than upstream slope overall. The variation of earth pressure increased according to the increase of embankment heights, while the change largely showed in the upstream slope, it was slowly increased in the downstream slope. The settlements largely increased until 23 m as embankment heights increased, and showed very little settlement overall. Under a steady state and transient conditions, the seepage quantity per day and leakage quantity per 100 m of embankment against total storage were shown to be stable for piping. The hydraulic gradient at the core before and after raising embankments was greater than the limit hydraulic gradient, showing instability for piping. The safety factor of upstream and downstream slopes were shown to be very large at a steady state, while the upstream slopes greatly decreased at a transit conditions, downstream slopes did not show any significant changes. The horizontal settlements, the maximum shear strain and stress are especially distributed at the connecting portion of the existing reservoir and the new extension of backside. Accordingly, the backside extension method should be designed and reinforced differently from the cases of other types reservoirs.

• Journal of Korean Society of Forest Science
• /
• v.29 no.1
• /
• pp.54-101
• /
• 1976

This study was conducted on the major factors affecting soil erosion and surface run-off. In order to investigate the processes and mechanisms of soil erosion on denuded forest-land in Korea, and to systematize the magnitudes of influences and interactions between individual factors, the five major factors adopted in these experiments are soil textures (coarse sand and clay loam), slope steepness ($10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$), rainfall intensities (50, 75 and 100mm/hr), slope mulching methods (bare, coarse straw-mat mulching, grass mulching and anti-erosion liquid mulching) and vegetation densities (sparse, moderate and dense). The processes and mechanisms of soil erosion, and the effects of mulchings on soil erosion as well as surface run-off rates were studied algebraically with four parts of laboratory experiments under the simulated rainfall and another part of field experiment under the natural rainfall. The results in this study are summarized as follows: 1. Experiment factors and surface run-off rates The surface run-off rates under the natural rainfall were resulted about 24.7~28.7% from the bare slopes, about 14.0~16.4% from the straw-mat mulched slopes, about 7.9~9.1% from the liquid mulched slopes, and about 5.6~7.2% from the grass mulched slopes respectively. The surface run-off rates under the simulated rainfall differed greatly according to the rainfall intensity and the mulching method. 2. Magnitudes of influences and interactions of the individual factor on the surface run-off rates. The experimental analyses on the major factors(soils, slopes, rainfalls, mulchings and vegetations) affecting the rates of surface run-off, show that the mean differences of surface run-off rate are significant at 5% level between the soil texture factors, among the slope steepness factors, among the rainfall intensity factors, among the mulching method factors, and among the vegetation density factors respectively. The interactions among the individual factor have a great influence(significant at 1% level) upon the rate of surface run-off, except for the interactions of the factors between soils and slopes; between slopes and vegetations; among soils, slopes and rainfalls; and among soils, slopes and mulchings respectively. On the bare slopes under the simulated rainfall, the magnitude of influences of three factors(soils, slopes and rainfalls) affecting the rate of surface run-off is in the order of the factor of rainfalls, soils and slopes. The magnitude of influences of three factors (soils, rainfalls and mulchings) affecting the rate of surface run-off, on the mulched slopes under the simulated rainfall is in the order of the factor of mulchings, rainfalls and soils and that of influences of the factor of soils, slopes and mulchings is in the order of the factor of mulchings, soils and slopes. On the vegetation growing slopes under the simulated rainfall, the magnitude of influences of three factors (soils, slopes and vegetations) affecting the rate of surface run-off is in the order of the factor of vegetations, soils and slopes. In the same condition of treatments on the field experiment under the natural rainfall, the order of magnitude of influences affecting the rate of surface run-off is the factor of mulchings, soils and slopes. 3. Experiment factors and soil losses The soil losses of the experiment plots differed according to the factors of soil texture, slope steepness, rainfall intensity and mulching method. The soil losses from the coarse soil were increased about 1.1~1.3 times as compared with that of fine soil under the natural rainfall, while the soil losses from the fine soil were increased about 1.2~1.3 times compared with that of coarse soil under the simulated rainfall. The equation of $E=aS^b$ (a, b are constant) between the slope steepness (log S) and soil losses (log E) under the simulated rainfall were developed. The equation of $E=aI^b$ (a, b are constant) between the rainfall intensity (log I) and soil losses (log E) were developed, and b values have a decreasing tendency according to the increase of the slope steepness and rainfall intensity. The soil losses under the natural rainfall were appeared about 38~41% from the coarse straw-mat mulched slopes, about 20~22% from the liquid mulched slopes, about 14~15% from the grass mulched slopes as compared with that of the bare slopes respectively. The soil loss from the vegetation plots showed about 7.1~16.4 times from the sparse plot, about 10.0~17.9 times from the moderate plot and about 11.1~28.1 times from the dense plot as compared with that of the bare slopes. 4. Magnitudes of influences and interactions of the individual factor on the soil erosion. The experimental analyses on the major factors(soils, slopes, rainfalls, mulchings and vegetations) affecting the soil erosion, show that the mean differences of soil losses are highly significant between the soil texture factors, among the slope steepness factors, among the rainfall intensity factors, among the mulching method factors and among the vegetation density factors respectively. The interactions among the individual factor have mostly great influences upon the soil erosion. The magnitude of influences of three factors (soils, slopes and rainfalls) affecting the soil erosion on the bare slopes under the simulated rainfall is in order of the factor of rainfalls, soils and slopes. On the mulched slopes under the simulated rainfall, the magnitude order of influences of three factors(soils, rainfalls and mulchings) affecting the soil erosion is the factor of mulchings, rainfalls and soils, and the order of influences of factor of soils, slopes and mulchings is the factor of mulchings, soils and slopes. On the vegetation growing slopes under the simulated rainfall, the magnitude of influences of three factors (soils, slopes and vegetations) affecting the soil erosion is in the order of the factor of slopes. vegetations and soils. In the same condition of treatments on the field experiment under the natural rainfall, the order of magnitude of influences of three factors (soils, slopes and mulchings) affecting the soil erosion is the factor of mulchings, of slopes and of soils.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.161-168
• /
• 2003

Most natural deposits of sandy soil possess some degree of cementation resulting from the deposition and precipitation of cementing agents. The presence of cementation can have a significant influence on the stiffness and volume change behavior, and the strength of soils. An important feature of deposits of cemented sandy soils is their ability to remain stable in surprisingly high and almost vertical man-made cuts as well as natural slopes. Numerous field observations and studies of failures in slopes of cemented soils have reported that application of conventional analysis techniques of slope stability is inadequate. That is not only due to the fact that the failure surface of the slope is not circular, but also the fact that the average shear stress along the failure surface is much smaller than the shear strength measured in laboratory shear experiments. This observation alerts us to the fact that a mechanism different from conventional Mohr-Coulomb shear failure takes place, which may be related to fracture processes, which in turn are governed by fracture mechanics concepts and theory. In this study, steep slopes in cemented sand were assessed using fracture mechanics concepts. The results showed that FEM coupled with fracture mechanics concepts provides an excellent alternative in the design and safety assessment of earth structures in cemented soils.