• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.685-691
• /
• 2000

In order to provide basis for an accurate concentration determination of volatile organic compounds(VOCs) in air, four different institutions participated in simultaneous measurements of several VOC species under the experimental scheme of the Measurement and Analysis Division(MAD) of the Korea Society for Atmospheric Environment(KOSAE). Two types of experiments were undertaken by collecting and analyzing ambient air samples from the 7th floor of Natural Science Building, Han Tang University during two day periods of the late May 1998. The first typer of experiment was conducted as five consecutive experiments at 2-hour intervals by two institutions. On the other hand. the second type of experiment was performed as two -10hr sampling by three different institutions. The data obtained from different type of experiments were examined using various statistical approaches. In general, the results of these experiments indicated that the VOC data produced by a number of Korean institutions be fairly agreeable.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.77-83
• /
• 1992

The effect of magnetic field on VDT work has not been clarified yet, but many studies repoerted that magnetic field could cause of the cancers. Many developed countries have set the criteria of magnetic field and produce the VDT which has lower magnetic value. The purpose of this study was to measure the intensity of magnectic field from VDT. For this purpose three experiments were performed. The first was designed to measure the intensity of magnetic field by distances(30,60,90 cm) and directions. The second was to compare the intensities between VDT and Color TV. The last was to evaluate the eye protec- tion glasses. The reults showed that the intensity of magnetic field was lowered in proportion to the distance $r^{3}$and both lateral sides of the VDT marked high values compared to the frontal and back sides. On the same distance (30 cm) color TV marked high value to the VDT. But on the normal work distance (TV: 100 cm, VDT: 30 cm) there was little difference, Eye protection glasses could not protect the magnetic field physically.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.204-208
• /
• 2016

This paper demonstrates the key parameter detection for smelting of submerged arc furnace (SAF) based on magnetic field radiation. A magnetic field radiation model for the inner structure of SAF is established based on relative theory of electromagnetic field. A simple equipment of 3D magnetic field detection system is developed by theoretical derivation and simulation. The experiments are carried out under the environment of industrial field and AC magnetic field generated by electrode currents and molten currents in the furnace is reflected outside of the furnace. The experimental results show that the key parameters of smelting including the position of electrode tip, the length of electric arc, and the liquid level of molten bath can be achieved. The computed tomography for SAF can be realized by the detection for smelting.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.593-596
• /
• 2003

The special amendment agent used in this study is mainly composed of inorganic metal salts such as sodium chloride, magnesium chloride, potassium chloride, calcium chloride, thus is friendly to the environment, and has a function of soil-cement-agent solidification. In this study, a series of laboratory and field experiments including unconfined compressive strength, permeability, pH test, constituent analysis, leaching test were carried out to analyse engineering and environmental characteristics of solidified sludge. The results of this research showed that the solidified sludge could be efficiently used in covering, filling, and planting materials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.169-173
• /
• 2010

Because of power consumption increase, global warming, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. In this paper, E field calculation and experiment were processed to identify the influence of the shape of end shield and gap distance. It is expected that the results of FEM simulation and experiments could be the basic data to develop VI. the results of FEM simulation and experiments are as following. Firstly, maximum E fields were compared by means of finite element method as a function of the shape of end shield. 3 types of models were used to analyze maximum E field of each model and the influence of shape of shield could be identified. As a result, proposed L type shield could reduce the maximum E field by 20%. Secondly, the influence of the gap distance between end shields on E field was analyzed. As the gap distance become short the gap distance between inner walls of ceramic also become short. And the maximum E field concentrated on inner wall of ceramic finally increased. Thirdly, the experiment was conducted by fabricating each prototype. As a result, no creepage occurred in shieldless model. In other words, creepage occurred in the shield-installed models. And creepage inception voltages were different from each other because of the difference of maximum E field. Fourthly, The equation that shows relation between calculated E field and measured creepage inception voltage was proposed as a result of FEM analysis and experiment. It is concluded that when designing VI this equation could be important data to reduce time and cost by identifying indirectly the optimal gap distance and the shape of shield required to prevent creepage.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.572-575
• /
• 2008

Flow-field design has much influence over the performance of proton exchange membrane fuel cell (PEMFC) because it affects the pressure magnitude and distribution of the reactant gases. To obtain the pressure magnitude and distribution of reactant gases in four kinds of flow-field designs without additional measurement equipment, computational fluid dynamics (CFD) analysis was performed. After the CFD analysis, the performance values of PEMFC according to the flow-field configurations were measured via a single cell test. As expected, the pressure differences due to different flow-field configurations were related to the PEMFC performance because the actual performance results showed the same tendency as the results of the CFD analysis. A large pressure drop resulted in high PEMFC performance. So, the single serpentine configuration gave the highest performance. On the other hand, the parallel flow-field configuration gave the lowest performance because the pressure difference between inlet and outlet was the lowest.

• Journal of The Korean Association For Science Education
• /
• v.1 no.1
• /
• pp.45-52
• /
• 1978

In order to normalized the Earth Science Education, experiments and geologic field trainings are very important. But it have not carried out on account of many difficulties in current High School of Korea. These difficulties are lack of time, many problems of the text book, heavy teaching load, shortage of facilities and experimental equipments, and poor quality of teacher etc. The practical training of geologic field trip is very important in Earth Science Education. Finally, wirter propose a new teaching plan of geologic field training as follows: 1. The teacher must prepare the guide paper of field geologic training. 2. Subjects of practical training must simplify. 3. The teacher must take a pre-field investigation in order to get the teaching plan and the preparation of practical field training. 4. Let students observe for themselves on this guide, as if they were geologists. 5. The teacher must conclude about practical training after the working.

• Hwankyungkyoyuk
• /
• v.13 no.2
• /
• pp.91-102
• /
• 2000

National curriculum for environmental education recommends various teaching-learning methods including survey and discussion of environmental problems, investigation of case studies, experiments, role play, and field-experience learning in addition to the traditional lecture-oriented teaching methods. The field experience learning in environmental education is considered to be a good method to develop environmentally sound attitude and to cultivate environmental sensitivity, but here has been very limited research concerning models for field-experience learning. The aim of this study is to develop a model of the field-experience learning program of environmental education utilizing environmental facilities. In this study a kind of such a basic model was developed and presented. The developed basic model of the field-experience learning was applied to the case utilizing landfill facilities. A specific application of the landfill program to the Bangcheon-ri landfill, in Daegu, was also presented with related teaching materials developed in this studies. And various aspects in the program was discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1165-1173
• /
• 2018

Recently, owing to environmental problems and instability of rare earth resources market, non-rare earth electric motors are attracting attention. As a non-rare earth motor type, a wound rotor synchronous motor(WRSM) has high power density and wide driving range further it can reduce loss by field current control during field weakening control at high speed. However, since the d-axis flux of the WRSM is coupled with the rotor circuit, the fluctuation in the d-axis flux linkage affects the rotor circuit, which causes ripple of the field current and torque. In this paper, we propose the field current ripple compensation method by injecting the feedforward voltage. the proposed compensating method was demonstrated by simulation and experiments.

• Journal of Korean Elementary Science Education
• /
• v.37 no.1
• /
• pp.12-26
• /
• 2018

The purpose of this study was to investigate the characteristics of reasoning in which $3^{rd}$ grade elementary school students form ideas, design experiments, and interpret the results to solve problems in small group argumentation. For this purpose, 12 3rd-grade students' small group argumentations including experiments were observed. The researchers analyzed students' pre- and post-open questionnaires, field notes, and video recordings of small group argumentation. The results of the research are as follows. First, in the initial opinion formation process, a hasty unification of opinions and a transformation of inquiry problem occurred. In the design and execution of experiments, verification experiments and unplanned and arbitrary experiments were performed. They also selectively noticed or accepted claims, evidence, interpretation, and criticism. They could distinguish between the condition and the cause, but they were confused by using inaccurate terms and tended to keep the initial opinions when interpreting the results and drawing conclusions.