• Culinary science and hospitality research
• /
• v.11 no.3 s.26
• /
• pp.151-165
• /
• 2005

The current study aims to help field managers of companies providing foodservice for institutions to establish the more appropriate cost management strategy by analyzing the cost structure of foodservice center in institutions by operating types and the number of people served. From the result analyzing 161 foodservice centers, the number of factories was highest with 39.8% while offices 26.7%, schools 20.5%, and hospitals 13%. In terms of the number of people served, below 500 persons was 27.6%, 501${\sim}$l,000 persons was 23.9%, 1,001${\sim}$2,000 persons was 22.7%, and over 2,001 persons was 25%. In the demographic characteristics of managers, women occupied over 92%. The reason for this is usually dieticians perform management duties. For the age of workers, 70.8% were older than 40s, which ran become the cause of a rise in cost by causing the decrease of productivity by aging. Therefore, appropriate countermeasures are required. In case of workers in production, women occupy 962 persons (82.2%) rating absolute majority like mangers. This is because cooks are in charge of almost every producing activity of meal facilities. In addition, more than 72.9% of workers in production were over 40 years old, which requires diversified studies to promote efficiency of production associated with the aging problem. In proportion of sales compared with cost material cost presented the highest percentage with 54.5% while labor cost 28.3%, general expenses 9.6% and business profit 7.6%.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.881-882
• /
• 2006

According as society looks graying trend gradually, more shaped system that can achieve measuring health-state of old people more harmoniously construction required in field of old people's welfare and medical treatment. Health-state is measured by two methods of contact and non-contact. The first, for example measurement of blood pressure or electrocardiogram, requires that measuring equipments are attached on human body but the second, for example X-Ray or MRI, is not. But both of methods are have some of defect, for example attaching equipments, needing of the special equipments or the necessary time, etc. Therefore desirable method of monitoring system must have minimum interrupt about daily life. This study suggest the system that can monitor the user, especially old people's outward aging and health-state by use the PAN TILTER and CCD camera.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1376-1380
• /
• 2007

The charged particle type display have characteristics of high contrast ratio and wide viewing angle, quick response time. We used the yellow(-) and the black(+) colored particles, which is respectively addressed to the cells of upper and rear panel by using electric field. Our independent addressing method has strong points compared to the mixed particle putting method. After addressing, we packaged two panels and did aging process, and then panel is driven by matrix method of four channel electrodes. Layers of particles are controlled by height of cell barriers and needed minimum two layers. When positive voltage is applied to the upper electrode, the yellow particles with negative charge move toward the upper substrate and the black particles with positive charge move toward opposite direction.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.50-59
• /
• 2009

Korea reached an aging society in 2000, and it is progressed quickly now. Government forecasts that the number of aged people over 65 years old will increase from 7.2%(2000) to above 14.3% among total population in 2018. Workers over fifty years old are increasing in construction field every year. These aged workers are exposed to various construction accidents, and also their accident rate is very high because of physical and psychological changes by aging. Specially, a disaster of aged workers more than 50 years old is fronted at the serious situation in the construction industry which has variable working environment. Thus, the purpose of this study is to suggest the precaution by analysing disaster characteristics of aged construction workers. Also, this study aims to present a basic counter-plan according to important safety management list which is abstracted from the work, aged construction workers' accident rate is high.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.590-593
• /
• 1999

$Y_2SiO_5$:Ce was considered as blue phosphor for field emission display because it had an excellent resistance against brightness saturation. But unfortunately It hadn't a sufficient brightness to be applied to FED. In this experiment It-$In_2O_3$, MgO and $SiO_2$ were coated onto $Y_2SiO_5$:Ce phosphor in order to improve the cathodoluminance(CL properties. The coating structures were identified to be the crystalline phases of $In_2O_3$ and MgO respectively. They had fine particle-like shape and were distributed on the surface of $Y_2SiO_5$:Ce phosphor. It was found that the CL efficiency of $Y_2SiO_5$:Ce phosphors were decreased after coatings with In20:j and MgO in voltage range from 500 V to 5 kV. But the brightness of $Y_2SiO_5$:Ce phosphor was increased after coating of 5 0 2 . And also the aging test showed that $In_2O_3$ coating improved the life time of $Y_2SiO_5$:Ce phosphor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.55-60
• /
• 2018

The thermal property is one of the most important characteristics in the field of energetic materials. Because energy materials release decomposition heat, differential scanning calorimetry (DSC) is frequently used for thermal analysis. However, thermodynamic events, such as melting can interfere with DSC kinetic analysis. In this study, we use isothermal mode for DSC measurement to avoid thermodynamic issues. We also merge accelerating rate calorimetry(ARC) data with DSC data to obtain a robust prediction results for small scale samples and for large scale samples as well. For the thermal property prediction, advanced kinetics and technology solutions(AKTS) programs are used.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.35-42
• /
• 2019

There are 17,427 reservoirs in Korea, of which about 96% were built before the mid 1980s. Therefore, aging is severe and reinforcement are necessary. In addition, aged reservoirs, which are more than 50 years old, account for 70% of the total. Therefore, there is a problem such as the collapse of the reservoir and the decrease of the storage capacity due to progress of aging with time. The grouting method using cement is mainly used as maintenance and reinforcement method of old reservoir. However, the grouting method using cement has engineering and environmental problems. In order to solve the engineering and environmental problems of cement grouting method, an eco-friendly grouting material was developed that mixes circular resource grouting binder, high molar ratio sodium silicate and colloidal silica. The engineering and environmental properties of the developed injection materials were evaluated by conducting gel time, homo-gel strength, sea water resistance test and environmental stability evaluation. Also, examined the possibility of replacing OPC existing aged reservoir reinforcement methods. As a result, it was found out that it was better than the conventional cement method in terms of engineering and environment. However, since this study is the result of laboratory test, it is necessary of verify the application at field of aged reservoir.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.723-743
• /
• 2022

Beef muscles from mature cows and bulls, especially those originating from the extremities of the carcass, are considered as underutilized due to unsatisfactory palatability. However, beef from culled animals comprises a substantial proportion of the total slaughter in the US and globally. Modern consumers typically favor cuts suitable for fast, dry-heat cookery, thereby creating challenges for the industry to market inherently tough muscles. In general, cull cow beef would be categorized as having a lower extent of postmortem proteolysis compared to youthful carcasses, coupled with a high amount of background toughness. The extent of cross-linking and resulting insolubility of intramuscular connective tissues typically serves as the limiting factor for tenderness development of mature beef. Thus, numerous post-harvest strategies have been developed to improve the quality and palatability attributes, often aimed at overcoming deficiencies in tenderness through enhancing the degradation of myofibrillar and stromal proteins or physically disrupting the tissue structure. The aim of this review is to highlight existing and recent innovations in the field that have been demonstrated as effective to enhance the tenderness and palatability traits of mature beef during the chilling and postmortem aging processes, as well as the use of physical interventions and enhancement.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.20-26
• /
• 2023

Fiber-reinforced composite materials with carbon, glass, and aramid fibers are widely applied to industrial field structures due to their excellent properties. However, carbon fibers are vulnerable to external impacts, whereas aramid fibers degrade when exposed to water. This study evaluated carbon/aramid fiber composites degraded and damaged by high-temperature saline environments using acoustic emission (AE). The test specimen was molded using an autoclave and immersed in seawater at 70 ℃ for 224 days. In order to imitate the damage, a 3-mm-diameter hole was drilled using a diamond drill. Additionally, the specimen with the perforation was repaired by patch attachment processing. Three-point bending was used to conduct the flexural experiment, and an AE sensor with a 150-kHz resonance frequency was attached to evaluate the damage and the effect of patch attachment. AE accumulative counts obtained at the maximum load were 69.2, 67.1, and 91.2 for a high-temperature seawater deteriorated condition, a hole specimen, and a repaired patch specimen, respectively. Furthermore, the maximum amplitude of AE was detected at low values of 28 dB, 31.3 dB, and 30.3 dB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.200-200
• /
• 2012

We investigated a flexible transparent film using the spinning multi-walled carbon nanotubes (MWCNTs). Spin-capable MWCNTs on iron catalyzed on a SiO2 wafer was grown by chemical vapor deposition, which was performed at $780^{\circ}C$ using C2H2 and H2 gas. The average diameter and length of MWCNTs grown on the substrate were ~15 nm and $250{\sim}300{\mu}m$, respectively. The MWCNT sheets were produced by continuously pulling out from well-aligned MWCNTs on a substrate. The MWCNT sheet films were produced simply by direct coating on the flexible film or grass. The thickness of sheet film was remarkably decreased by alcohol spraying on the surface of sheet. The alcohol splay increased transmittance and decreased electrical resistance of MWCNT sheet films. Single and double sheets were produced with sheet resistance of ~699 and ${\sim}349{\Omega}/sq$, respectively, transmittance of 81~85 % and 67~72%, respectively. The MWCNT sheet films were heated through the application of direct current power. The flexible transparent heaters showed a rapid thermal response and uniform distribution of temperature. In addition, MWCNT yarns were prepared by spinning a bundle of MWCNTs from vertically super-aligned MWCNTs on a substrate, and field emission from the tip and side of the yarns was induced in a scanning electron microscope. We found that the field emission behavior from the tip of the yarn was better than the field emission from the side. The field emission turn-on voltages from the tip and side of MWCNT yarns were 1.6 and $1.7V/{\mu}m$, respectively, after the yarn was subjected to an aging process. Both the configuration of the tip end and the body of the yarn were changed remarkably during the field emission. We also performed the field emission of the sheet films. The sheet films showed the turn on voltage of ${\sim}1.45V/{\mu}m$ during the field emission.