• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.69-77
• /
• 2011

A peristaltic micropump with lightweight piezo-composite actuator (LIPCA) membrane valves is presented. The micropump contained three cylinder chambers that were connected by microchannels and two active membrane valves. A circular miniature LIPCA was developed and manufactured to be used as actuating diaphragms. The LIPCA diaphragm acted as an active membrane valve that alternate between open and closed positions at the inlet and outlet in order to produce high pumping pressure. In this LIPCA, a lead zirconium titanate ceramic with a thickness of 0.1 mm was used as an active layer. The results confirmed that the actuator produced a large out-of-plane deflection. During the design process, a coupled field analysis was conducted in order to predict the actuating behavior of the LIPCA diaphragm; the behavior of the actuator was investigated from both a theoretical and experimental perspective. The active membrane valve concept was introduced as a means for increasing pumping pressure, and microelectromechanical system techniques were used to fabricate the peristaltic micropump. The pumping performance was analyzed experimentally in terms of the flow rate, pumping pressure and power consumption.

• 한국멀티미디어학회논문지
• /
• 제1권2호
• /
• pp.183-193
• /
• 1998

칼라 역 해프토닝(Color inverse half toning)은 해프토닝된 칼라 영상을 시각적으로 보다 자연스러운 연속 계조 칼라영상으로 변환해 주는 방법이다. 본 논문에서는, 칼라 채널 영상에서 나타나는 해프톤 셀 패턴을 효과적으로 제거할 수 있는 새로운 평활화 마스크를 제안하고, 이를 칼라 역 해프토닝에 활용하였다 제안한 평활화 마스크는 기존의 평활화 마스크가 잘 제거하지 못했던 해프톤 셀 패턴올 시각적으로 보다 자연스럽게 평활화할 수 있으며, 마스크의 특성이 다양한 해프톤 영상에 적합하게 자동 조정될 수 있도록 설계하였다 실험을통해, 기폰의 방법과본논문에서 제안한방법에 의한결과 영상을다양한측면에서 비교분석함으로써 제안한 평활화 마스크의 유용성올 확인하였다. 제안한 방법은 전자 출판, 칼라 팩스, 디지힐 도서관 구축 퉁과 같은 멀티미디어 분야에서 활용될 수 있다.

• Smart Structures and Systems
• /
• 제6권1호
• /
• pp.29-38
• /
• 2010

An ElectroMagnetic Actuator (EMA) is designed and assessed numerically and experimentally. The EMA has the advantage to be without contact with the structure so it could be applied to light and small mechanism. Nevertheless, the open-loop instability and the nonlinear dynamic behavior with respect to the excitation frequency could limit its application field. The EMA is designed and dimensioned as a function of the experimental structure to be controlled. An inverse model of the EMA is proposed in order to implement a linear action block for the used frequency range. The control strategy is a fuzzy controller with displacements and velocities as inputs. A fuzzy controller of Takagi-Sugeno type is used. The air gap is estimated by using a modal approximation of the displacements issued from all measurements. Several configurations of control are assessed by using numerical simulations. The block diagram used for numerical simulations is implemented under Dspace$^{(R)}$ environment. The implemented controller was tested experimentally in the context of impact perturbations. The results obtained show the effectiveness of the developed procedures and the robustness of the implemented control.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.64-70
• /
• 2015

A rapid urbanization has increased the portion of paved layer that results in the change of water circulation system. This change leads to frequent events of flooding, drought, and urban heat island. To resolve these issues, permeable pavement system based on Low Impact Development (LID) concept is being applied to international urban areas. Therefore it is necessary to establish a rational design procedure for the permeable pavement system that reflects our environmental conditions. iDue to inherent characteristics of permeable pavement system, water infiltrates thorough the layers so it may reduce the bearing capacity of sub-layers. In this study, an effort was made to investigate the effectiveness of geogrid reinforced crushed stone subbase layer based on field experimental program along with a limited numerical analysis. It reveals that geogrid reinforced sections improve the bearing capacity by close to 20%. In addition, a light weight deflectomenter (LWDT) appears to be promising for the compaction quality control of crushed stone subbase layer in order to construct qualified permeable pavement systems.

• 산경연구논집
• /
• 제10권6호
• /
• pp.7-17
• /
• 2019

Purpose - The purpose of this study is to explore how advertising for multilevel marketing brands affect the salesperson's activity including customer-salesperson interactivity, work attitude, and perceived and actual performance after the campaign. Research Design, data, and methodology - This study collects experimental data, survey data, and actual sales data and applies statistical analyses such as factor analysis, t-tests, and a structural equation model. Results - The results show that advertising campaign can enhance a salesperson's selling activities and provide wide managerial implications to a multilevel marketing firm by filling the gaps for the field of advertising research. Conclusions - Managerial implications include: i) multilevel marketing firms should consider advertising campaigns as a means of changing customer responses because advertising plays a significant role in increasing familiarity with, and knowledge of, attitudes toward the brand, which also helps salespeople interact with customers; ii) multilevel marketing firms should consider brand advertising as a means to support the sales activities of salespeople including sales effectiveness, work attitudes, and perceived performance, and iii) multilevel marketing firms should consider brand advertising as a means to enhance a salesperson's pride and motivation for selling their brand, which will lead to improved sales performances.

• 교육시설
• /
• 제11권1호
• /
• pp.5-14
• /
• 2004

Since 1990s in Korea, elementary school classrooms have been designed toward open education system in pursuit of variety of educational purpose. Also, the architectural designs of schools have been acomplished for individual school not based on the standard design code. The present paper aims to investigate the acoustic environment of existing classrooms and to compare the sound insulation capacity between the ordinary classrooms and the newly built classrooms for open education. The current acoustical situation of elementary classrooms was analyzed using field measurements and questionnaire survey. In order to this, Three elementary schools were selected which were built in 1978, 1996 and 2000 respectively. Room acoustical parameters including Reverberation time(RT), Definition(D50), Speech Intelligibility(RASTI), Transmission loss(TL) and STC were measured in a classroom in each elementary school classroom. Each measurement was undertaken with the windows and doors being open or closed. As the result, it was found that the transmission loss between rooms in open classrooms is, $5{\sim}6dB$ in average, inferior than the ordinary classrooms. The RASTI of 0.70 was measured in newly built classrooms which is better than old classrooms(0.70) and open classrooms(0.73). This was shown as same in the speech definition measurements. This results from the condition of sealing and airtightness of classrooms and floor materials. The results denote that open classrooms have poor acoustic condition in sound insulation and speech intelligibility.

• Computers and Concrete
• /
• 제9권6호
• /
• pp.469-486
• /
• 2012

This paper presents Neuro-Fuzzy (NF) based empirical modelling of torsional strength of RC beams for the first time in literature. The proposed model is based on fuzzy rules. The experimental database used for NF modelling is collected from the literature consisting of 76 RC beam tests. The input variables in the developed rule based on NF model are cross-sectional area of beams, dimensions of closed stirrups, spacing of stirrups, cross-sectional area of one-leg of closed stirrup, yield strength of stirrup and longitudinal reinforcement, steel ratio of stirrups, steel ratio of longitudinal reinforcement and concrete compressive strength. According to the selected variables, the formulated NFs were trained by using 60 of the 76 sample beams. Then, the method was tested with the other 16 sample beams. The accuracy rates were found to be about 96% for total set. The performance of accuracy of proposed NF model is furthermore compared with existing design codes by using the same database and found to be by far more accurate. The use of NF provided an alternative way for estimating the torsional strength of RC beams. The outcomes of this study are quite satisfactory which may serve NF approach to be widely used in further applications in the field of reinforced concrete structures.

• 산업기술연구
• /
• 제24권A호
• /
• pp.179-184
• /
• 2004

Each year, new technological advancements for repair-purpose are being introduced to overlay the old deterioration of RC bridge deck at highway by latex-modified concrete. The days may come when this old problem will be successfully resolved. While the experimental works and researches are very active at both laboratory and field, only a few theoretical studies were performed on interfacial problems, especially on stress distribution and concentration of RC beam overlayed by latex-modified concrete. The repaired and strengthened structures would induce a premature failure due to the stress concentration at the adhesive layer of different material before the design expected failure. This paper investigated and proposed an analytical model for predicting interfacial shear and normal stresses of RC beam repair-purpose overlayed by latex-modified concrete. This would be used for predicting interfacial stresses and preventing premature failure at interfaces. This study modified Smith-Teng method for applying to cementitious repairing material, which was based on a direct governing equation and linear-elastic approach for interfacial normal and shear stresses. The proposed theoretical model was verified using commercial FEA program, LUSAS, in terms of interfacial stresses predicted by the proposed model and calculated by LUSAS.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.355-368
• /
• 1997

Fiber reinforced plastic (FRP) rods are used as reinforcement (prestressed or not) to concrete. FRP composites can also be combined with steel to form hybrid reinforcing rods that take advantage of the properties of both materials. In order to effectively utilize these rods, their bond behavior with concrete must be understood. The objective of this study is to characterize and model the bond behavior of hybrid FRP rods made with epoxy-impregnated aramid or poly-vinyl alcohol FRP skins directly braided onto a steel core. The model closely examines the split failure of the concrete by quantifying the relationship between slip of the rods resulting transverse stress field in concrete. The model is used to derive coefficients of friction for these rods and, from these, their development length requirements. More testing is needed to confirm this model, but in the interim, it may serve as a design aide, allowing intelligent decisions regarding concrete cover and development length. As such, this model has helped to explain and predict some experimental data from concentric pull-out tests of hybrid FRP rods.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.803-807
• /
• 2018

This study evaluated the duck growth performance and the economic benefits on using illite as a feed additive for ducks. Illite powder at three levels (0%, 1%, and 1.5%) was added to commercial duck diets, and fed to 180 one-day-old ducks (Pekin, 3 replicates, 20 ducks per pen) using a randomized block design for 39 days. During the experimental period, there were no significant growth performance differences between treatments (p>0.05), except with the feed conversion ratio (p<0.05), for all periods (8-39 days). In addition, the dietary supplementation of 1% and 1.5% illite did not significantly improve (p>0.05) Feed Intake Cost (FIC), Weight Gain Value (WGV), Meat Production Cost (MPC), Economic Efficiency (EE), Profitability (P), or cost benefit ratio for 8 to 21 d, 22 to 39 d, and 8 to 39 d. However, the differences in meat production cost and profitability between treatments were statistically significant (p<0.05) for all periods (8-39 d). In conclusion, adding 1% and 1.5% illite to duck diets is not beneficial for improving either the duck growth performance or the economic indicators.