• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.14-20
• /
• 2015

Without electirc power to cool down the hot reactor core, passive systems utilizing natural circulation are becoming a big specialty of recent neculear systems after the severe accident in Fukusima. When we consider the natural circulation in a pool, thermal mixing phenomena may start from single phase circulation and can continue to two phase condition. Since the CUPID code, which has been developed for two-phase flow analysis, can deal with the phase transition phenomena, the CUPID would be pertinent to natural convection problems in single- and two-phase conditions. Thus, the CUPID should be validated against single- and two-phase natural circulation phenomena. For the first step of the validation process, this study is focused on the validation of single-phase natural circulation. Moreover, the CUPID code solves the fluid properties by the relationship to pressure and temperature from the steam table considering non-condensable gas effects, so that the effects from variable properties are included. Simple square thermal cavity problems are tested for laminar and turbulent conditions against numerical and experimental data. Throughout the investigation, it is found that the variable properties can affect the flow field in laminar condition, but the effect becomes weak in turbulence condition, and the CUPID code implementing steam table is capable of analyzing single phase natural circualtion phenomena.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.1
• /
• pp.106-113
• /
• 1997

A field experiment was carried out on a dryland farming area of southern Bali for 92 weeks, to study the growth and fodder yield of 16 provenances of Gliricidia sepium in guardrow system. The experimental design was completely randomized blocks of 16 treatments (Gliricidia sepium provenances) replicated 3 times, with 6 plants per provenance. Six provenances were from Mexico (M), four from Guatemala (G), and one each from Colombia (C), indonesia (I), Nicaragua (N), Panama (P), Costa Rica (R) and Venezuela (V). After 40 weeks establishment the gliricidia were lopped 4 times a year at 150 cm height, at 2 months intervals during the 4 month wet season and 4 month intervals during the 8 month dry season. Stem elongation varied from 21 to 81 cm, leaf retention from 39 to 240%, branch number from 12 to 35, fodder yield from 1,090 to 3,153 g DW/plant. and wood yield from 743 to 2,750 g DW/plant. Pontezuelo provenance of Colombia (C24), Belen provenance of Nicaragua (N14) and Retalhuleu provenance of Guatemala (G14) were ranked first, second and third, respectively, for stem elongation, leaf retention, fodder and wood yields, during the wet and dry seasons.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1515-1521
• /
• 2014

This study applies simulation-based education and care for acute myocardial infarction nursing students to investigate the effect of critical thinking, problem solving, and academic achievement of a single group before and after the raw experimental design. A total of 137 subjects were arbitration period September-October 2011, enforcement and arbitration were evaluated after simulation-based training six weeks total. Data analysis was performed using SPSS Win17.0, Paired t-test, the mean and standard deviation, Pearson's correlation coefficient was used. Research results of simulation-based training program to improve critical thinking, problem solving, and academic achievement were As increase critical thinking and problem solving ability was improved. whereas, Critical thinking skills and problem solving ability was no significant difference with academic achievement. Simulation-based training program to improve the practical skills of nursing students learning was found how useful it, that there is a need to take advantage of hands-on training in a variety of cases that can be common in the field of clinical scenarios developed by. To do this, It seems to be necessary to the development and operation more varied and appropriate hands-on training method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.5
• /
• pp.819-830
• /
• 2010

This study proposes medical gowns for interns and residents that address the functions of utility and activity. Based on the questionnaires, the prototype focused on the pockets for practical use and movement adaptability. Functional pockets were made by increasing pocket sizes and separating pockets with sections according to use. An inside pocket and a loop for an identification tag was placed on the chest pocket and the side seam pocket were oblique lined. To resolve horizontal stress on the back of the gown,6 cm action pleats were added at both ends of the bladebone. The elbow area was tucked up to improve the workplace activities. To reduce hamper on the gown hemline, slits were added along the gown side seam. The front button was changed into an inside button closure. The cuffs, belt, and back waist belt were removed due to occupational cases of inconvenience. The length of the sleeves was adjusted with belts to improve the movement of the arms. In accordance with design preference, the gown was designed to be knee-length with wrist length sleeves. Blue colored (2.5PB 3/12: by Munsell) material was inserted to reduce the contamination on the neck, cuffs, front closure, and hemline area. The planning cloth of the experimental gown was designed to improve activity function, cleaning, and comfort from light materials. The field test (with 30 doctors at university hospitals and the objective assessment with 9 subject groups)were done by the valuation between the existing gown and the prototype. The results showed that the prototype had to be modified by decreasing the pocket size, expanding the usage of the penholder, and simplify front pockets in order to maintain unity. The loop for the identification tag, inside pocket, and the blue colored material had to be removed. The front closure of the gown had to return to its original state.

• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.1
• /
• pp.85-96
• /
• 1990

Simultaneous removal efficiencies of hydrophilic and hydrophobic gaseous pollutants are experimentally determined, and the macroscopic removal mechanism of pollutants in a dry scrubber is analyzed using the extended model of three phase equilibrium distribution of pollutant at high temperatures that can describe the different morphological conditions of adsorbent and water at varying relative humidities. For the simplicity, the inside of spray dryer is divided into three regions of ; (1) absorption, (2) three-phase equilibrium, and (3) adsorption, and the removal efficiencies of each pollutants at three regions are observed at different experimental conditions to estimate the effects of important parameters of dry scrubber. The laboratory experiments simulate the three regions of spray dryer with the temperature control and thus evaporation rate of water from the slurry particle. $SO_2$ as a hydrophilic gaseous pollutant and vinyl chloride as a hydrophobic toxic gas are selected for the future field application to soid waste incineration, and the two types of slurry are made of the two sorbents ; 10 wt.% $Ca(OH)_2$, and 10 wt.% NaOH. Result of temperature effect shows the height of absorption plus three-phase region is decreased as the operation temperature is increased, which results in the lower removal efficiency of $SO_2$ but higher removal for vinyl chloride in the adsorption region of dry scrubber. The removal efficiency of $SO_2$ is higher by NaOH slurry than by $Ca(OH)_2$ slurry due to the hygroscopic nature of NaOH, while the removal of vinyl chloride is higher in $Ca(OH)_2$ case. From the analysis of redults using three-phase equilibrium distribution model, the effective two-phase partition coefficients can be obtained, and the possible extention in the application of the three-phase equilibrium model in a dry scrubber design has been demonstrated.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.191-198
• /
• 2005

Hippuryl-L-histidyl-L-leucine (Hip-L-His-L-Leu, HHL) is the known substrate of ACE, which used often in inhibition kinetic study to design new inhibitor. Here we use HHL molecule as a template to predict pharmacophore which can interact with residues in active site of AnCE, new potential insecticide target protein. To explain physicochemical properties related to molecular geometry and conformational change in reaction field as well as electron density of atoms associated to pharmacophores, geometry optimization, NMR chemical shifts and natural population analysis were performed by ab initio and DFT method. Calculated NMR chemical shifts showed good agreement with the experimental ones and obtained electron densities were used for analyzing pharmacophores of corresponding atoms. Finally, we could extract aye pharmacophores related to hydrophobic aliphatic and aromatic site, hydrogen bonding donor and acceptor site and Zn binding site from the HHL molecule.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.607-612
• /
• 2017

Recently, additive manufacturing (AM) technology, also known as 3D printing technology, has attracted attention as an innovative production method to fabricate functional components having complex shapes with saving materials. In particular, a fabrication of poly lactic acid (PLA) parts through a fused deposition modeling (FDM) technique has attracted much attention in the medical field. In this paper, an experimental study on the identification of dominant process parameters influencing mechanical properties of PLA parts fabricated by the FDM process is conducted, and their optimal values for maximizing the mechanical properties are obtained. Three process parameters are considered in this research, namely, layer thickness, a part orientation and in-fill. It is known that thin layer thickness, part orientation diagonal to the tension direction, and full in-fill are optimal conditions to maximize the mechanical properties.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.2
• /
• pp.113-120
• /
• 1996

The experiment was carried out to investigate the effects of phosphate fertilizer level on growth, crude protein content and nitrogen fixation ability of alfalfa(Medicugo sariva L.) at sowing year. The experimental field was conducted using a randomized block design with three replications according to the phosphate application level (200 and 400kfia) in farm of Kongju National University. Research samples were collected at intervals of 7 days from October 7 to December 9 and nitrogen fixation activity of nodule was measured by using the acetylene reduction method (Hardy et al. 1968). The results obtained are summarized as follows : 1. Number of branches, root length and dry matter weight at phosphate fertilizer level of 400kg in sowing year were more increase than those of 200kfia. The number of nodules was not significantly difference between phosphate fertilizer level, because of low temperature to be enough to nodulation of alfalfa. 2. The crude protein content of leaf, stem and root were not significantly affected by the phosphate fertilizer level. but that of leaf was increased at 400kgha on 72 days after sowing. The crude protein content of each part according to growing stages was increased at 44 days and 72 days after sowing. 3. The dry weight of root was not significantly difference between phosphate fertilizer level from 30 days to 51 days after sowing, but that was increased at phosphate fertilizer level of 400kgha from 51 days afier sowing. 4. The amount of ethylene in the samples taken 2 hours and calculated amount of nitrogen fixation were increased at phosphate fertilizer level of 400kfia from 30 days to 65 days after sowing. but there was vice versa from 58 days after sowing.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.22-32
• /
• 1998

This paper describes a research work of developing a computer-aided design of irregularly shaped-sheet metal product with bending and piercing operation for progressive working. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of five main modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking dimensions and the best utilization ratio of blank-layout within bending production feasibility area which is beyond ${\pm}30^{\circ}$ degrees intersecting angle between grain flow and bending edge line and which is suitable to progressive bending operation. Also the strip-layout drawing generated by a bending and a piercing operation according to punch profiles divided into automatically for external area of irregularly shaped-sheet metal product is displayed in graphic forms.