• Magazine of RCR
• /
• v.5 no.3
• /
• pp.9-13
• /
• 2010

• Journal of the Korean housing association
• /
• v.16 no.5
• /
• pp.107-116
• /
• 2005

This study focuses on the planning and actual use of the transitional spaces in the residential-commercial mixed-use buildings. The range of case study include from the year of 1960's to 2000. Through the case study and field survey, we can extract the elements of the transitional space and the problems of Mixed-Use building from the viewpoint of transitional space. According to the field survey, most of the residential-commercial mixed-use buildings contain the transitional space to some degree, but there need to be a more active planning method to secure the residential factors and for this reason, the application of the transitional space must be emphasized at a higher level.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.284-291
• /
• 2012

This study is to present development plan for next study on applying the method of case study by applying scientific inference focusing on analysis and generalization of case study or study question about the tendency of thesis for case study of the field of crisis management released since 2004. As the result of analysis, the study on crisis management of Korea is almost individual technical case study and it is rarely to get proper study which can contribute theoretical formation for development of individual course of crisis management. Furthermore researchers are required to study in-depth about study plan that presents organization of study or logic of case selection and formality for data analysis.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.1
• /
• pp.121-141
• /
• 2004

This study is a case study with four classes of sophomore majoring in library ＆ information science in S woman's college, with a questionnaire, firstly to research the students' recognition of their experience on bibliotherapy and the time, their preference of the materials' genre for the bibliotherapy. usefulness of the bibliotherapy' subject, apply possibility into library work, and the field of science that must be supplemented for the bibliotherapy. Secondly. a direction of development is presented analyzing researched contents and lecture experiences, centering on the factors that should be complemented and prepared in studying or lecturing the course of bibliotherapy as a school subject in the field of library ＆ information science hereafter.

• Journal of Welding and Joining
• /
• v.19 no.4
• /
• pp.384-390
• /
• 2001

There have been many problems due to deformation in industry field. Especially, it is severe in parts with small size and thin thickness and in products that must have excellent airtightness and anti-noise. The countermeasures for this deformation in field have mainly been dependent on the rule of trial and error by operator's experience because of productivities. Systematic study about this product with deformation is also insufficient that deformation is complex problem with shape, size, material of product, joining method and conditions, etc.. It is efficient to apply CAE technique without influence on productivity to this problem. There is, however much difference between the result analyzed by CAE and appearances in working field because of the insufficiency of communication between simulator and worker and of sensing data for boundary condition in analysis. In this study, to solve this deformation problem, we intend to make a simulation model that is adapted from working conditions by tuning and feedback between sensing data and simulation results. This paper include temperature monitoring and make a heat transfer model using sensing data in product as previous step for deformation analysis. The heat transfer analysis of shrinkage fit process is considerably difficult due to contact heat transfer between case and core. To solve this contact problem, gap element is used in present study.

• Child Health Nursing Research
• /
• v.8 no.3
• /
• pp.344-356
• /
• 2002

This study was conducted to analyse the current clinical education of pediatric nursing in baccalaurate nursing program, then to give basic data for enhancing the quality of future clinical education of pediatric nursing. Data were collected through self-reported questionnaire by mail from December 2001 to February 2002. The subjects were 29 schools of 50 baccalaurate nursing education programs. The data were analysed by double raters, researcher and assistant researcher. The results were summarized as follows: 1. Twenty-eight schools had the objectives of the clinical education of pediatric nursing, and 28 schools in pediatric ward, 23 schools in nursery, 22 schools in neonatal intensive care unit(NICU), 15 schools in objectives related to profession by clinical site. 2. Credits on clinical education of pediatric nursing were most 15 schools of 3 credits. 3. The clinical sites were mainly the hospital that sick children were admitted in. 4. The clinical teacher were 9 types including pediatric professor and field nurse. 5. On teacher's role, the professor instructed the case study and conference, and field nurse instructed the patient assignment and nursing procedures. 6. All of schools used explanation and conference as a method of clinical education, 1 or 2 schools used PBL or role play or field study. 7. On clinical education content, most of school included Apgar scoring system, physical examination in newborn assessment, respira- tion maintenance, temperature maintenance, infection prevention, nutrition, and bath in newborn care. 8. On clinical education content, most of school included care of incubator, phototheraty, infusion, gavage feeding and how to use the instruments in NICU. Eighteen schools included attachment promotion, and 20 schools case study. 9. On clinical education content, most of school included a checklist of nursing procedures, case study, assessment of growth and development in pediatric ward and other sites. 10.There were various evaluation types in scores, measuring items. In conclusion, the results of this study revealed that there were some discrepancy in the objectives and contents, clinical sites on hospital focused, teacher's role, and diversity of measurement items and ratings in clinical education of pediatric nursing. There is a need for a standardization of content, clinical site, and evaluation tool to improve a quality of clinical education of pediatric nursing based on this study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.177-187
• /
• 2000

Measurements of temperature fields and film-cooling effectiveness have been conducted for a shower-head film cooling on the leading edge of a blunt body, which simulates a first-stage turbine stator. In this study, three injection cases are employed for an average blowing ratio based on freestream velocity, M, of 0.5, 1.0 and 1.5. Two (Case 1), four (Case 2) and six (Case 3) rows of normal holes are symmetrically drilled on the three tested circular-cylinder leading edges. The measurements show that regardless of M, the film-cooling effectiveness increases as the injection row is situated at farther downstream location. In Case 1, the film-cooling effectiveness is highest for M = 0.5 and lowest for M = 1.5. On the contrary, in Case 3, the film-cooling effectiveness is highest for M = 1.0 and lowest for M = 0.5. When M = 0.5, the film coverage by the first row of the injection holes deteriorates as the number of the injection row increases. In particular, the film-cooling effectiveness due to the injection through the first row of the holes in Case 3, has a nearly zero value.

• Journal of Information Technology Applications and Management
• /
• v.17 no.3
• /
• pp.1-24
• /
• 2010

Most of enterprises depend on a data modeler during developing their management information systems. In formulating business requirements for information systems, they widely and naturally use the interview method between a data modeler and a field worker. But, the discrepancy between both parties would certainly cause information loss and distortion that lead to let the systems not faithful to real business works. To improve or avoid modeler-dependant data modeling process, many automated data design CASE tools have been introduced. However, since most of traditional CASE tools just support drawing works for conceptual data design, a data modeler could not generate an ERD faithful to real business works and a user could not use them without any knowledge on database. Although some CASE tools supported conceptual data design, they still required too much preliminary database knowledge for a user. Against these traditional CASE tools, we proposed a Requirement-Oriented Entity Relationship Model for automated data design tool, called ROERM. Based on Non-Stop Methodology, ROERM adopts inner systematic modules for complete and sound ERD that is faithful to real field works, where modules are composed of interaction modules with a user, rules of schema operations and sentence translations. In addition to structure design of ROERM, we also devise detailed algorithms and perform an experiment for a case study.

• Tribology and Lubricants
• /
• v.36 no.5
• /
• pp.274-278
• /
• 2020

This study investigates the possibility of reducing squeal noise generated at the contact point between an elastomer and glass by using the properties of a magneto-rheological elastomer (MRE) whose stiffness changes with the application of a magnetic field. Previously, squeal noise was mainly observed in the unstable section caused by the weakening of friction due to velocity. Previous studies have shown that squeal noise decreases as the stiffness increases. Accordingly, this study is conducted to control the unstable area of the friction curve and to reduce the noise by inducing the stiffness change of the MRE by applying a magnetic field. The friction, vibration, and noise characteristics are measured using a reciprocating friction tester. The frequency ranges of vibration and noise measured with the accelerometer and sound sensor show similar results. When a magnetic field is applied to the MRE, there is significantly lower noise compared with the case without the application of the magnetic field. The average coefficient of friction decreases with the application of the magnetic field. The maximum coefficient of friction increases rapidly at the turning point and decreases when the magnetic field is applied. This shows that the mechanical properties of the MRE change due to the magnetic field, and the noise and friction coefficient also decrease.